New York CDL HazMat case studies
New York CDL HazMat · Put your knowledge to work in context.
The New York CDL Hazardous Materials endorsement is an add-on to a New York State Commercial Driver License that lets a driver legally operate a commercial vehicle carrying hazardous materials. It is intended for working or prospective commercial drivers who already hold a CDL and want to haul placarded loads, and it appears on the license as the H or X endorsement code. The New York CDL HazMat case studies are 5 cases and about 3,897 words.
1Aggregate Weight and the Two-Placard Dock
You are picking up a mixed LTL load at a warehouse outside Syracuse for a 150-mile run to Albany. The dock supervisor hands you the shipping papers and two placards - CORROSIVE and FLAMMABLE - then walks away.
768 words, about 4 min2Ten-Hour Break with Division 1.3G Fireworks
You are hauling 8,000 lb of Division 1.3G consumer fireworks in a 53-foot van, 400 miles into a 600-mile run. and you have driven 7 hours, so a 10-hour break is due.
770 words, about 4 min3The Tunnel That "Everybody Runs"
You are delivering into a downtown district. The trailer holds 1,800 lb of Division 2.1 propane cylinders and 1,200 lb of Class 8 corrosive in carboys; both are loaded and the trailer is placarded.
727 words, about 4 min4Cyanide and Acid on the Same Trailer
You are at a chemical distributor's dock picking up two orders for the same customer: 16 fiber drums of sodium cyanide (Division 6.1, PG I), 800 lb total, and 12 carboys of hydrochloric acid solution (Class 8, PG II), 600 lb total. Both go in your 48-foot dry van.
829 words, about 4 min5A Dripping Drum at 2 a.m.
you pull into a rest area 60 miles into an overnight run. The trailer holds twelve 55-gallon drums of sulfuric acid solution (Class 8, PG II) on the floor and 500 lb of Class 3 flammable liquid in pails on the nose.
803 words, about 4 min