OH Fire Sprinkler flashcards
OH Fire Sprinkler · Build recall with a focused review session.
32 cards. Read the term and the definition here. The deck at the top of this page is optional.
- Ohio contractor license authority
- The Ohio Division of State Fire Marshal licenses fire protection system contractors under Revised Code Chapter 3781, issuing the license to the business entity that performs the contracting work.
- Scope of contractor license
- An Ohio fire protection system contractor license covers contracting for layout, installation, testing, servicing, repair, and maintenance of fire suppression and detection systems, including sprinklers and standpipes.
- Qualifying certified individual
- The contractor must have a certified fire protection system designer or installer who supervises the work; the individual's certification must stay current for the contractor license to remain valid.
- License application contents
- Applications to the Division of State Fire Marshal include proof of the qualifying individual's certification, evidence of required insurance, business information, and the applicable fee.
- Duty to notify Division
- The contractor must report changes in business name, address, or the certified individual responsible for supervision, because these changes can affect the validity of the contractor license.
- Unlicensed contracting penalties
- Performing fire protection system contracting without an Ohio license can bring cease-and-desist orders, civil penalties, and denial or revocation of licensure by the Division of State Fire Marshal.
- Ohio Fire Code adoption
- The Division of State Fire Marshal administers the Ohio Fire Code, which adopts by reference national standards such as NFPA 13, 13R, 13D, 14, 20, and 25 for sprinkler work.
- Authority having jurisdiction
- The AHJ for sprinkler work may be the Division of State Fire Marshal or a certified local building or fire department, and it reviews plans and inspects installations for code compliance.
- Plan submittal requirement
- Before installing an automatic sprinkler system, the contractor submits construction documents to the authority having jurisdiction for review and approval as required by the adopted code.
- Contractor license renewal
- The contractor license must be renewed on the cycle set by the Division of State Fire Marshal, and renewal depends on the qualifying individual's certification remaining active.
- NFPA 13 application
- NFPA 13 governs design and installation of automatic sprinkler systems in commercial and industrial occupancies and is referenced by the Ohio Fire Code for such buildings.
- NFPA 13R application
- NFPA 13R covers sprinkler systems in low-rise residential occupancies up to and including four stories, and it is adopted by reference in Ohio for those buildings.
- NFPA 13D application
- NFPA 13D applies to one- and two-family dwellings and manufactured homes, providing a life-safety-oriented sprinkler design with reduced water supply requirements.
- NFPA 14 standpipe scope
- NFPA 14 governs installation of standpipe and hose systems, including Class I, II, and III systems, and is referenced by the Ohio Fire Code for manual suppression piping.
- NFPA 25 inspection scope
- NFPA 25 sets the minimum requirements for inspection, testing, and maintenance of water-based fire protection systems after installation, including sprinklers, standpipes, and fire pumps.
- NFPA 20 fire pump scope
- NFPA 20 governs selection and installation of stationary fire pumps that supply sprinkler and standpipe systems, including driver, controller, and water supply requirements.
- Certification versus license
- The individual designer or installer holds a certification from the Division, while the business entity holds the contractor license; both are required for lawful sprinkler contracting.
- Inspection by AHJ
- After installation, the authority having jurisdiction inspects the sprinkler system to confirm it matches approved plans and complies with the adopted Ohio Fire Code before acceptance.
- Recordkeeping obligation
- Contractors retain installation, test, and maintenance records for sprinkler systems so that inspections, acceptance tests, and later NFPA 25 activities can be verified.
- Insurance evidence requirement
- License applicants provide evidence of insurance required by the Division, demonstrating financial responsibility for fire protection system contracting work performed in Ohio.
- Continuing education for certificate holders
- Certified designers and installers must complete continuing education and renew certification on schedule, which supports the contractor license held by their employer.
- Cease-and-desist authority
- The Division of State Fire Marshal may order an unlicensed person or firm to stop performing fire protection system contracting work and may pursue civil penalties.
- Local certification of departments
- Ohio allows local building and fire departments to be certified to exercise code enforcement, so the AHJ on a sprinkler project may be local rather than the state.
- Standpipe contractor work
- Installing or repairing standpipe and hose systems is fire protection system contracting under Ohio law and requires the contractor license and qualified certified personnel.
- Fire pump contractor work
- Installing, testing, or servicing fire pumps that supply sprinkler systems falls within licensed fire protection system contracting and must follow NFPA 20 as adopted.
- Testing and servicing scope
- Routine testing, servicing, and maintenance of sprinkler systems are licensed contracting activities in Ohio, not unregulated tasks, and must follow NFPA 25 requirements.
- Approved plans on site
- Approved construction documents must be available at the job site during installation so the AHJ can compare the work performed against the approved sprinkler design.
- License denial or revocation
- The Division may deny or revoke a contractor license for violations such as unlicensed activity, code noncompliance, or loss of the qualifying individual's certification.
- Owner responsibility distinction
- The property owner is responsible for ongoing NFPA 25 inspection, testing, and maintenance, while the licensed contractor performs the installation and contracted service work.
- Hydraulic calculations submittal
- Sprinkler plan submittals include hydraulic calculations showing that the water supply meets the demand of the most remote design area at the required density.
- Water supply verification
- Before design approval, the contractor verifies the available water supply through flow test data, since the adopted standards require the supply to satisfy system demand.
- Final acceptance test
- The contractor conducts the acceptance test, including hydrostatic and flow tests as required, and the AHJ witnesses it before the sprinkler system is placed in service.