ECAT study materials
ECAT study resources

ECAT case studies

ECAT · Put your knowledge to work in context.

ECAT is the entry test used for admission to undergraduate engineering and technology programmes at the University of Engineering and Technology (UET), Lahore. Candidates apply through the university's admission portal, and the test result is published on a date announced by the university - the current source notes "Admissions Open - Spring 2026, ECAT RESULT - April 17, 2026", so treat that date as the university's published announcement and confirm it on the official admission site before you plan anything around it. The ECAT case studies are 5 cases and about 1,913 words.

1

Projectile Motion with Air Resistance

A physics student launches a small ball from ground level with an initial speed of 20 m/s at an angle of 30° above the horizontal. In a vacuum, the ball would follow a parabolic path and land at a horizontal distance of approximately 35.3 m.

468 words, about 2 min
2

Le Chatelier's Principle in Ammonia Synthesis

The Haber process for ammonia synthesis is given by: N 2(g) + 3H 2(g) 2NH 3(g) H = -92.4\, kJ/mol A chemical engineer operates the reactor at 450°C and 200 atm with a catalyst. At equilibrium, the mixture contains 12% NH3 by volume.

385 words, about 2 min
3

Optimization of a Rectangular Enclosure

A farmer has 100 meters of fencing to enclose a rectangular field adjacent to a straight river. No fencing is needed along the river.

464 words, about 2 min
4

Critical Reading: Analyzing an Argument

However, a growing number of educators argue that these tests only measure a student's ability to take tests, not their true understanding or creativity. For example, a student who excels in hands-on projects may perform poorly on a multiple-choice exam.

292 words, about 1 min
5

Electrical Circuit Analysis with Internal Resistance

A student sets up a circuit with a battery of emf 12 V and internal resistance 0.5 Ω connected to two resistors in parallel: R1 = 6 Ω and R2 = 3 Ω. An ammeter and a voltmeter are used to measure current and voltage.

304 words, about 2 min