NAVTTC Auto Electrician exam-day guide
NAVTTC Auto Electrician · Prepare for the day ahead.
Your checklist
National ID or passport (original)
Bring the original photo ID you used at registration. A photocopy or phone photo is normally not accepted. Confirm with the provider which ID types are valid and whether a second form is required.
Admit card / roll number slip
Carry the printed admit card or registration confirmation issued to you. If you have not received one, contact the provider well before exam day. Confirm with the provider whether a printout is mandatory or a digital copy is acceptable.
Trade theory and practical revision notes
Bring concise notes on the topics most likely tested: battery and charging systems, starting systems, lighting and wiring, ignition, and basic electrical measurements. Keep them in a folder you can leave outside the practical bay.
Basic hand tools (if permitted)
Many trade tests supply tools, but some allow or expect your own. Confirm with the provider whether personal tools are allowed and which items are approved. Do not bring tools you cannot account for.
Personal protective equipment (PPE)
Safety shoes, safety glasses, and any required workwear are commonly mandatory in a practical bay. Confirm with the provider the exact PPE list and whether it is supplied or must be brought.
Multimeter familiarity
Be ready to use a digital multimeter for voltage, resistance, and continuity checks. If the provider supplies the meter, arrive early enough to see the model and confirm how it is set up.
Knowledge of safe battery handling
Review correct procedures for disconnecting and reconnecting batteries, avoiding short circuits, and handling electrolyte safely. Practical assessors watch safety behaviour closely.
Arrival time and route plan
Confirm the reporting time, test centre address, and gate entry process with the provider. Plan to arrive with spare time for security checks and registration.
No prohibited electronics
Phones and smart devices are commonly restricted in test areas. Confirm with the provider where devices must be stored during the practical.
Refreshment and medication needs
Practical tests can run long. Bring water if permitted and any necessary medication. Confirm with the provider what is allowed into the test area.
Plan the day
Re-read the syllabus or trade standard for your level and list the practical tasks you are least confident about. Practise those tasks hands-on: battery testing, starter circuit checks, lighting circuit fault-finding, and meter use. Confirm your reporting time, centre address, and the exact list of permitted tools and PPE with the provider.
Pack your ID, admit card, PPE, and permitted tools in one bag. Rehearse the safe sequence for battery disconnect and reconnect, and review how to read a wiring diagram. Get a full night's sleep. Avoid learning new material late.
Eat properly and arrive at the centre early. Complete registration and ID checks. Listen carefully to the assessor's briefing on bay layout, tool location, and emergency procedures. Ask for clarification on anything unclear before the timer starts.
Read each task fully before touching equipment. Work methodically: isolate power, verify dead, then diagnose. State your reasoning aloud if the assessor invites it. Keep your work area tidy and return tools. If a task stalls, move on and return if time allows. Before finishing, double-check terminations, insulation, and that nothing is left live.
Rules to check
Carry the original photo ID used at registration. If you are unsure which documents are accepted, confirm with the provider before exam day.
Follow all safety instructions from assessors. Isolate circuits before working, use the required PPE, and never bypass a safety device to save time.
Do not bring unauthorised notes, phones, or smart devices into the practical bay. Confirm with the provider where such items must be stored.
Work only on the equipment assigned to you and do not interfere with other candidates' bays or tools.
If you need a break, water, or accessibility accommodation, ask the assessor. Confirm with the provider in advance how breaks are handled and whether they affect your time.
Scoring is based on the provider's marking scheme, typically covering safety, correct procedure, fault diagnosis, and finished work quality. Ask the assessor to explain the marking criteria if it is not stated in the briefing.
If equipment is faulty or a tool is missing, report it to the assessor immediately rather than improvising with unsafe substitutes.
Do not discuss or share task details with other candidates during the test. Follow the provider's instructions on when you may leave the centre.