I85PREP
⌘ K
Zimbabwe VID Provisional Test study materials
Zimbabwe VID Provisional Test study resources

Zimbabwe VID Provisional Test practice questions

One question at a time. Build your Zimbabwe VID Provisional Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road Traffic Signs, Signals and Road Markings

What does a red octagonal sign mean?

  1. Slow down and continue if clear
  2. No entry for all vehicles
  3. Stop completely and give way Correct answer.
  4. Give way to traffic on the right

Explanation

An octagon is used only for STOP signs. You must bring the vehicle to a complete halt, then proceed only when it is safe. Rolling slowly past the line is not a stop.

Question 2Road Traffic Signs, Signals and Road Markings

A triangular road sign with a red border generally conveys what kind of message?

  1. A route for heavy vehicles
  2. A warning of a hazard ahead Correct answer.
  3. A compulsory instruction
  4. A parking restriction

Explanation

Triangles with red borders are warning signs. They alert you to a hazard so you can adjust speed and position. Compulsory instructions use circular signs.

Question 3Road Traffic Signs, Signals and Road Markings

What is the meaning of a circular sign with a red border and a black arrow pointing straight up?

  1. One-way street begins
  2. No overtaking
  3. Turn left ahead
  4. Ahead only Correct answer.

Explanation

A red-ringed circle is a compulsory sign. A single arrow pointing straight up means you must proceed ahead only. It forbids turning off in other directions at that point.

Question 4Road Traffic Signs, Signals and Road Markings

What do double solid white lines along the centre of the road mean?

  1. Vehicles on either side may cross to overtake
  2. Overtaking is permitted if the road is clear
  3. Parking is allowed on both sides
  4. No vehicle may cross or straddle the lines Correct answer.

Explanation

Double solid centre lines prohibit crossing or straddling from either direction. They mark a stretch where overtaking is unsafe, such as on a blind rise or bend. You must stay on your own side.

Question 5Road Traffic Signs, Signals and Road Markings

A broken white line down the centre of a two-way road indicates what?

  1. A lane reserved for buses
  2. The edge of the carriageway
  3. Overtaking is allowed when it is safe Correct answer.
  4. A pedestrian crossing zone

Explanation

A broken centre line separates opposing traffic and may be crossed to overtake when it is safe. The driver must still judge sight distance and oncoming traffic. It does not grant an automatic right to overtake.

Question 6Road Traffic Signs, Signals and Road Markings

What does a flashing red traffic signal mean at a junction?

  1. Proceed without stopping
  2. The signals are out of order and no rules apply
  3. Stop and proceed only when safe Correct answer.
  4. Give way only to vehicles from the left

Explanation

A flashing red signal requires you to stop as at a STOP sign. You may proceed only after stopping and confirming the way is clear. Normal right-of-way rules then apply.

Question 7Road Traffic Signs, Signals and Road Markings

A steady amber traffic light means what?

  1. Accelerate to clear the junction quickly
  2. Proceed because amber gives right of way
  3. Stop unless it is unsafe to do so Correct answer.
  4. Reverse out of the junction

Explanation

Amber warns that red is about to follow. You must stop unless you are so close that stopping could cause a collision. It is not a signal to speed up.

Question 8Road Traffic Signs, Signals and Road Markings

What does a green arrow signal pointing left mean?

  1. Traffic may proceed only in the direction of the arrow Correct answer.
  2. Pedestrians have priority over turning traffic
  3. Traffic must stop before turning left
  4. All traffic may move in any direction

Explanation

A green arrow is a protected movement signal. Only the movement shown by the arrow is permitted while it is lit. Other movements remain controlled by their own signals.

Question 9Road Traffic Signs, Signals and Road Markings

A solid yellow line along the left edge of the road in an urban area usually indicates what?

  1. A cycle track
  2. A loading zone for goods vehicles
  3. A no-parking restriction Correct answer.
  4. A bus stop only

Explanation

Yellow edge markings in urban areas are used to mark parking restrictions. A solid yellow line means parking is not allowed along that stretch. The restriction applies even when no sign is visible nearby.

Question 10Road Traffic Signs, Signals and Road Markings

What does a white diamond symbol painted on the road surface warn you about?

  1. A speed hump ahead
  2. A pedestrian crossing ahead Correct answer.
  3. A school bus stop ahead
  4. A railway level crossing ahead

Explanation

The diamond road marking is placed in advance of a pedestrian crossing. It warns drivers to expect people crossing and to prepare to stop. It is often repeated to give adequate warning distance.

Question 11Road Traffic Signs, Signals and Road Markings

A sign showing a red circle with a black car and a red car side by side means what?

  1. Cars are prohibited
  2. Cars must keep left
  3. No overtaking Correct answer.
  4. No parking for cars

Explanation

The two-car symbol is the no-overtaking sign. It prohibits overtaking other motor vehicles on that stretch. The restriction usually applies until a sign cancels it or the road marking changes.

Question 12Road Traffic Signs, Signals and Road Markings

What does a blue circular sign with a white bicycle symbol require?

  1. Cyclists must dismount
  2. A route reserved for cyclists Correct answer.
  3. Bicycles are prohibited
  4. Cyclists must give way to cars

Explanation

A blue circle is a compulsory sign. With a bicycle symbol it marks a route or lane that only cyclists may use. Other vehicles must not enter that lane.

Question 13Road Traffic Signs, Signals and Road Markings

You are approaching a give-way sign at a T-junction. What is the correct action?

  1. Stop completely in every case before entering
  2. Slow down, look and give way to traffic on the through road Correct answer.
  3. Give way only to traffic approaching from the left
  4. Sound your horn and enter the through road

Explanation

At a give-way sign you must yield to traffic on the road you are joining. A full stop is only required if traffic makes it necessary. You must be able to enter without forcing others to change speed or direction.

Question 14Road Traffic Signs, Signals and Road Markings

A yellow box junction is marked on the road ahead. What is the rule?

  1. You must not enter unless your exit is clear Correct answer.
  2. You may enter and wait if your exit is blocked
  3. You may stop in the box to pick up passengers
  4. You may park in the box for short periods

Explanation

A yellow box is designed to keep a junction clear. You may enter only if your exit is clear, so you do not block cross traffic. Waiting inside the box blocks the junction and is an offence.

Question 15Road Traffic Signs, Signals and Road Markings

What does a sign with a red triangle showing a train symbol warn you about?

  1. A tram stop in the road
  2. A railway station entrance
  3. A goods vehicle route
  4. A railway level crossing without gates ahead Correct answer.

Explanation

The train symbol in a warning triangle warns of a railway level crossing ahead. You should be prepared to stop and check for trains. Crossings with gates or barriers may carry a different supplementary sign.

Question 16Road Traffic Signs, Signals and Road Markings

A red circle with a white horizontal bar means what?

  1. Stop
  2. Road closed to pedestrians
  3. One way
  4. No entry Correct answer.

Explanation

The red circle with a white bar is the no-entry sign. It means vehicles must not proceed past the sign from that direction. It is often placed at the exit of a one-way street.

Question 17Road Traffic Signs, Signals and Road Markings

What does a broken yellow line along the edge of the road indicate?

  1. The road is a clearway for all vehicles
  2. Parking is prohibited at all times
  3. Parking is restricted at certain times as shown on nearby signs Correct answer.
  4. Loading is permitted only for buses

Explanation

A broken yellow edge line marks a partial parking restriction. The times or conditions are shown on nearby plates or signs. Parking outside those times may be allowed.

Question 18Road Traffic Signs, Signals and Road Markings

What is the meaning of a circular blue sign showing a white arrow pointing down and to the left?

  1. Turn left ahead
  2. No left turn
  3. Give way to the left
  4. Keep left of the obstruction Correct answer.

Explanation

A blue circle with a diagonal arrow instructs you to pass on a particular side. The arrow pointing down-left means keep to the left of the island or obstruction. It is a compulsory direction sign.

Question 19Road Traffic Signs, Signals and Road Markings

A sign showing a red circle with the number 60 inside means what?

  1. A minimum speed of 60 km/h
  2. A recommended speed of 60 km/h
  3. A distance of 60 metres to the next junction
  4. A maximum speed of 60 km/h Correct answer.

Explanation

A red-ringed circle with a number is a maximum speed limit. You must not exceed that speed on the stretch it governs. The limit remains until a different limit sign is shown.

Question 20Road Traffic Signs, Signals and Road Markings

You see a pedestrian crossing marked by broad white stripes and a flashing amber beacon. What must you do?

  1. Proceed because pedestrians must wait for you
  2. Sound your horn to warn pedestrians
  3. Stop only if a pedestrian raises a hand
  4. Give way to pedestrians on the crossing Correct answer.

Explanation

At a zebra-style crossing, pedestrians on the crossing have priority. You must slow down and be ready to stop, giving way to anyone already crossing. The beacon warns drivers that the crossing is in use.

Question 21Road Traffic Signs, Signals and Road Markings

What does a rectangular sign with a white 'P' on a blue background mean?

  1. No parking at any time
  2. A police checkpoint ahead
  3. A pedestrian zone
  4. Parking is permitted Correct answer.

Explanation

The letter P on a blue background indicates parking is permitted. Supplementary plates may show time limits or charges. A red ring or a diagonal bar would change the meaning to a restriction.

Question 22Road Traffic Signs, Signals and Road Markings

A driver approaches a junction where the traffic lights are completely dark because of a power failure. What is the correct approach?

  1. Proceed at speed because no signal applies
  2. Sound the horn and drive through without looking
  3. Treat the junction as uncontrolled and apply give-way rules Correct answer.
  4. Wait until the lights come back on

Explanation

When signals are not working, the junction becomes uncontrolled. Normal give-way rules apply, and drivers should approach with caution and be ready to stop. Assuming a right of way is dangerous.

Question 23Road Traffic Signs, Signals and Road Markings

What does a triangular warning sign showing an exclamation mark mean?

  1. A pedestrian zone
  2. A general hazard or other danger ahead Correct answer.
  3. A compulsory stop
  4. An end of speed limit

Explanation

The exclamation mark in a warning triangle signals a hazard not covered by a specific symbol. A supplementary plate usually explains the nature of the danger. Drivers should reduce speed and be alert.

Question 24Road Traffic Signs, Signals and Road Markings

A road has a solid white line along its left edge and a broken white line separating two lanes travelling in the same direction. What does the broken line allow?

  1. Crossing to change lanes when safe Correct answer.
  2. Parking along the edge
  3. Driving on the right-hand side of the road
  4. Overtaking on the left at any time

Explanation

A broken white line between lanes in the same direction permits lane changes when it is safe. You must signal, check mirrors and blind spots, and ensure the lane is clear. The solid edge line marks the boundary of the carriageway.

Question 25Road Traffic Signs, Signals and Road Markings

What does a sign showing a red circle with a white arrow pointing right and a red diagonal slash mean?

  1. Right turn for buses only
  2. Turn right only
  3. Give way to the right
  4. No right turn Correct answer.

Explanation

A red ring with a slash cancels the movement shown by the arrow. The slash through a right-pointing arrow therefore prohibits turning right. The restriction applies at that junction.

Question 26Road Traffic Signs, Signals and Road Markings

What does a circular sign with a red border and a white background showing a black pedestrian symbol mean?

  1. Pedestrians are prohibited from entering this road. Correct answer.
  2. A pedestrian crossing is ahead; give way to pedestrians.
  3. A school zone is nearby; reduce speed.
  4. Pedestrians must use the footpath on the left.

Explanation

A red circle indicates a prohibition. The pedestrian symbol inside means that pedestrians are not allowed on that road or area.

Question 27Road Traffic Signs, Signals and Road Markings

What does a triangular warning sign showing a black symbol of a car skidding mean?

  1. The road surface is slippery when wet. Correct answer.
  2. The road narrows ahead.
  3. There is a sharp bend to the left.
  4. There is a steep hill ahead.

Explanation

A triangle with a skidding car warns of a slippery road surface, often due to rain, ice, or spilled oil. Drivers should reduce speed and avoid sudden braking or steering.

Question 28Road Traffic Signs, Signals and Road Markings

What does a blue circular sign with a white arrow pointing straight ahead indicate?

  1. You must proceed straight ahead only. Correct answer.
  2. You must turn left ahead.
  3. There is a one-way street ahead.
  4. You may turn right or go straight.

Explanation

Blue circular signs give mandatory instructions. A white arrow pointing straight ahead means you must continue straight and must not turn at the junction.

Question 29Road Traffic Signs, Signals and Road Markings

What does a broken white line in the centre of a two-way road mean?

  1. The line marks the edge of the carriageway.
  2. You may park on the line.
  3. You may cross the line to overtake when it is safe to do so. Correct answer.
  4. You must not cross the line at any time.

Explanation

A broken white centre line separates traffic moving in opposite directions. You may cross it to overtake or turn when you have a clear view and it is safe.

Question 30Road Traffic Signs, Signals and Road Markings

What does a traffic light showing a steady red light mean?

  1. You may proceed if the road is clear.
  2. You may turn left if there is no traffic.
  3. You must stop behind the stop line. Correct answer.
  4. You must slow down and give way.

Explanation

A steady red light requires you to stop at the stop line and remain stopped until the light changes to green. Turning is not permitted unless a green arrow indicates otherwise.

Question 31Road Traffic Signs, Signals and Road Markings

What does a sign with a red circle and a white horizontal bar mean?

  1. No stopping.
  2. No through road.
  3. No parking.
  4. No entry for all vehicles. Correct answer.

Explanation

A red circle with a white horizontal bar is the 'No Entry' sign. It prohibits all vehicles from entering that road or area.

Question 32Road Traffic Signs, Signals and Road Markings

What does a solid white line along the left edge of the road indicate?

  1. The edge of the carriageway; do not cross except to enter a property or lay-by. Correct answer.
  2. You may overtake using the shoulder.
  3. A cycle lane is provided.
  4. Parking is allowed on the line.

Explanation

A solid white edge line marks the boundary of the carriageway. You should not cross it except when necessary to enter a property, lay-by, or emergency.

Question 33Road Traffic Signs, Signals and Road Markings

What does a triangular warning sign showing a black symbol of children mean?

  1. Children are prohibited from crossing here.
  2. A cycle route crosses ahead.
  3. A pedestrian crossing is ahead.
  4. A school or playground is nearby; drive slowly and watch for children. Correct answer.

Explanation

A triangle with children warns that children may be crossing or playing nearby, often near schools. Reduce speed and be prepared to stop.

Question 34Road Traffic Signs, Signals and Road Markings

What does a circular blue sign with a white bicycle symbol mean?

  1. A cycle lane or route is provided and cyclists must use it. Correct answer.
  2. A bicycle repair shop is ahead.
  3. Cyclists must give way to motor vehicles.
  4. Bicycles are prohibited.

Explanation

A blue circular sign with a bicycle indicates a mandatory cycle route or lane that cyclists must use. Motor vehicles may be restricted from that lane.

Question 35Road Traffic Signs, Signals and Road Markings

You are driving and approach a junction where the traffic lights are flashing amber. What should you do?

  1. Stop and wait for a green light.
  2. Speed up to clear the junction quickly.
  3. Proceed with caution, giving way as necessary. Correct answer.
  4. Treat it as a stop sign and stop completely.

Explanation

A flashing amber light at a junction means proceed with caution, giving way to traffic already on the junction and to pedestrians. It is often used when signals are malfunctioning or during off-peak hours.

Question 36Road Traffic Signs, Signals and Road Markings

What does a double solid white line in the centre of the road mean?

  1. You must not cross or straddle the line. Correct answer.
  2. The line marks a bus lane.
  3. You may park on the line during off-peak hours.
  4. You may cross to overtake if the road is clear.

Explanation

Double solid white lines indicate that crossing or straddling the line is prohibited, often because visibility is restricted. You must stay in your lane.

Question 37Road Traffic Signs, Signals and Road Markings

You see a broken yellow line along the edge of the road. What does it indicate?

  1. A cycle lane is present.
  2. The road is a clearway at all times.
  3. Waiting restrictions apply at certain times, shown on nearby plates. Correct answer.
  4. You may park there at any time.

Explanation

Broken yellow lines indicate that waiting restrictions apply, often during specified times shown on nearby signs. You should check the plates before parking.

Question 38Road Traffic Signs, Signals and Road Markings

What does a traffic light showing a green arrow pointing straight ahead mean?

  1. You may proceed straight ahead only; other directions are still stopped. Correct answer.
  2. You must turn left or right.
  3. The traffic lights are about to change to red.
  4. You may proceed straight ahead, but must give way to oncoming traffic.

Explanation

A green arrow allows movement only in the direction of the arrow. Other movements are still controlled by their respective red lights.

Question 39Road Traffic Signs, Signals and Road Markings

What does a rectangular sign with a white symbol of a bus on a blue background mean?

  1. Buses must give way to other traffic.
  2. A bus stop or bus lane is ahead. Correct answer.
  3. A bus station is to the left.
  4. Buses are prohibited.

Explanation

A blue rectangular sign with a bus symbol indicates a bus stop or bus lane. Drivers should be aware of buses pulling out or passengers.

Question 40Road Traffic Signs, Signals and Road Markings

What does a triangular warning sign showing a black symbol of a train mean?

  1. A train station is nearby.
  2. A railway level crossing is ahead; be prepared to stop. Correct answer.
  3. A tram line crosses the road.
  4. Trains are prohibited from crossing.

Explanation

A triangle with a train symbol warns of a railway level crossing ahead. Approach with caution and obey any signals or barriers.

Question 41Road Traffic Signs, Signals and Road Markings

What does a circular sign with a red border and a white background showing the number '30' mean?

  1. Speed limit ends after 30 metres.
  2. Minimum speed is 30 km/h.
  3. Maximum speed is 30 km/h. Correct answer.
  4. Distance to the next town is 30 km.

Explanation

A red circle with a number indicates the maximum speed limit in kilometres per hour. You must not exceed that speed.

Question 42Road Traffic Signs, Signals and Road Markings

You are approaching a junction and the traffic lights are showing a steady amber light. What should you do?

  1. Stop if it is safe to do so; otherwise proceed with caution. Correct answer.
  2. Accelerate to pass before red.
  3. Proceed as normal; amber means go.
  4. Stop immediately, even if in the junction.

Explanation

Steady amber means stop at the stop line unless you are so close that stopping suddenly would cause an accident. You may proceed if it is unsafe to stop.

Question 43Road Traffic Signs, Signals and Road Markings

What does a broken white line separating two lanes travelling in the same direction mean?

  1. The lane is reserved for buses.
  2. You may change lanes when it is safe. Correct answer.
  3. You must not change lanes.
  4. The road is one-way.

Explanation

Broken white lines between lanes in the same direction indicate that lane changing is permitted when safe. You should signal and check mirrors before moving.

Question 44Road Traffic Signs, Signals and Road Markings

What does a sign showing a red circle with a white arrow pointing left and a red diagonal slash mean?

  1. One-way street to the left.
  2. No left turn. Correct answer.
  3. Left turn only.
  4. Left lane ends ahead.

Explanation

A red circle with a diagonal slash over an arrow indicates a prohibition. An arrow pointing left with a slash means no left turn.

Question 45Road Traffic Signs, Signals and Road Markings

You are driving on a road with a solid white line on your side and a broken white line on the other side. What does this mean?

  1. You must not cross the line; traffic on the other side may cross if safe. Correct answer.
  2. Both sides may cross freely.
  3. You may cross the line to overtake if safe.
  4. The line marks a bus lane.

Explanation

When a solid line is on your side, you must not cross it. The broken line on the other side allows traffic coming the other way to cross if safe.

Question 46Road Traffic Signs, Signals and Road Markings

What does a traffic light showing a red light and a green arrow pointing left mean?

  1. You may proceed straight ahead only.
  2. You must stop and wait for a green light.
  3. You may turn left, but must give way to pedestrians and traffic. Correct answer.
  4. You may turn left without giving way.

Explanation

A green arrow allows movement in the direction of the arrow, but you must still give way to pedestrians and any traffic already on the road you are joining.

Question 47Road Traffic Signs, Signals and Road Markings

What does a yellow box junction mean?

  1. You must not enter the box unless your exit is clear, except to turn right. Correct answer.
  2. You must not enter the box at any time.
  3. You may park in the box briefly.
  4. You may enter and wait in the box if your exit is clear.

Explanation

A yellow box junction is designed to keep traffic flowing. You must not enter unless your exit is clear, except when turning right and only blocked by oncoming traffic.

Question 48Road Traffic Signs, Signals and Road Markings

What does a triangular warning sign showing a black symbol of a car with a trailer mean?

  1. Trailers are prohibited.
  2. A steep hill ahead; trailers may be at risk. Correct answer.
  3. A road with a soft verge; trailers may sink.
  4. A trailer park is ahead.

Explanation

A triangle with a car and trailer often warns of a steep hill where trailers may become unstable or slow. Drivers should be prepared for slow-moving vehicles.

Question 49Road Traffic Signs, Signals and Road Markings

What does a sign showing a red circle with a white arrow pointing down and to the right mean?

  1. Keep left of the obstacle.
  2. Give way to traffic from the right.
  3. Keep right of the obstacle. Correct answer.
  4. Turn right ahead.

Explanation

A blue circular sign with a white arrow pointing down and to the right is a keep right sign, directing traffic to pass to the right of an obstacle or island.

Question 50Road Traffic Signs, Signals and Road Markings

You are driving and see a circular sign with a red border containing a black symbol of a car overtaking another car. What does this sign require of you?

  1. Only heavy goods vehicles may overtake here
  2. Overtaking is permitted only if the road ahead is clear
  3. You must move into the left lane immediately
  4. Overtaking other vehicles is prohibited at this point Correct answer.

Explanation

A red-bordered circular sign is a prohibitory sign, and the symbol of one car passing another bans overtaking at that location. The restriction applies regardless of whether the road ahead appears clear, until a sign or marking ends it. Regulatory prohibitions take effect from the sign itself.