ICC study materials
ICC study resources

ICC case studies

ICC · Put your knowledge to work in context.

ICC certifications are credentials issued by the International Code Council for professionals who work with construction codes and standards. The Code Council describes its credentialing program as "one of the most historic and prestigious credentialing programs for construction codes and standards," and it offers several certification pathways to support career development. The ICC case studies are 5 cases and about 2,066 words.

1

Inspector Certification Scope and Combination Designation

A municipality has adopted a certification program where an inspector holds a single 'Combination Inspector' credential covering building, plumbing, mechanical, and electrical. You are the newly hired inspection supervisor.

424 words, about 2 min
2

Special Inspector Concrete Placement Under Strength Nonconformance

You are the special inspector on a commercial foundation. The approved mix design specifies 4,000 psi at 28 days.

395 words, about 2 min
3

UST Release Detection and Inventory Reconciliation

You are inspecting a gasoline station with two 10,000-gallon single-wall steel tanks installed in 1988. Tank 1 is equipped with automatic tank gauging (ATG) and a manual inventory system; Tank 2 has only manual inventory and a tightness-test record from four years ago.

468 words, about 2 min
4

Contractor Trades: Gas Piping Pressure Test Failure

You are the inspection authority for a residential combination project. The plumbing contractor installed 1/2-inch and 3/4-inch black steel gas piping and performed a 10 psig air pressure test on the system, holding it for 10 minutes.

391 words, about 2 min
5

Combination Designation: Conflicting Trades on One Project

You hold a combination designation covering building, plumbing, mechanical, and electrical. On a small commercial tenant improvement, you find three issues on the same visit: (1) the electrical panel has a double-tapped breaker feeding a new circuit; (2) the mechanical unit is installed with a condensate drain that terminates in a location that could cause damage; and (3) the plumbing vent terminates too close to a operable window.

388 words, about 2 min