Meisterprüfung Zahntechnik exam-day guide
Meisterprüfung Zahntechnik · Prepare for the day ahead.
Your checklist
Valid photo ID and admission documents
Bring the ID type the examining body requires plus your invitation/admission letter. The exact accepted ID types and whether a copy is sufficient are set by the chamber or provider - confirm with the provider before exam day.
Confirmed schedule, room, and arrival time
Re-check the written confirmation for date, start time, building, and station/room. Arrival and lateness rules differ between providers, so confirm the cut-off time and what happens if you are delayed.
Personal protective equipment
Safety glasses, suitable work clothing, and any hearing or dust protection the workshop requires. Confirm with the provider whether PPE is supplied on site or must be brought.
Hand tools you are expected to supply
Check the task or equipment list for which instruments the candidate provides versus which are on the bench. Do not assume the lab supplies burs, handpieces, or measuring tools - confirm the list with the provider.
Permitted materials and any pre-fabricated parts
If the task allows prepared models, patterns, or purchased components, verify in advance what is permitted and how it must be declared. Unclear items should be confirmed with the provider in writing.
Written task instructions and assessment criteria
Read the task sheet and scoring rubric carefully before starting. If criteria are not distributed in advance, ask the provider whether they can be shared for preparation.
Timekeeping device without smart features
A simple watch or timer helps you pace stations. Confirm whether phones or smartwatches are banned from the bench; many providers restrict them, so plan a compliant alternative.
Medication, food, and hydration for a long day
Practical exams can run many hours. Bring water and a snack if permitted, and declare any medication you may need. Confirm break and food rules with the provider.
Plan for transport, parking, and a buffer
Arrive early enough to register, store belongings, and set up without rushing. Confirm parking or public transport options and where personal items may be left.
Rehearsed workflow and station plan
Practice the full sequence under time pressure beforehand and write a short step plan with checkpoints. Decide in advance how you will handle a failed step or equipment problem.
Knowledge of the reporting procedure for defects or incidents
Know whom to notify if a handpiece fails, material is defective, or an injury occurs. Ask the provider for the on-site contact and incident procedure before the exam.
Emergency contact and provider phone number
Save the examining body's contact number and an emergency contact in case of transport problems or illness. Confirm the correct number with the provider.
Plan the day
Re-read the invitation and task list, confirm room, start time, and permitted equipment with the provider, and resolve any open questions in writing. Gather tools and PPE, check handpieces and instruments for function, and replace worn burs or defective parts. Run one full timed rehearsal of the expected workflow so you know where time is lost.
Pack the bag from the checklist and lay out clothing. Prepare food and water for the day and check transport. Review your step plan and the assessment criteria rather than cramming new material. Confirm the alarm, go to bed at a normal time, and avoid last-minute practice that risks injury or fatigue.
Eat a proper breakfast, arrive with a buffer, and complete registration and ID check calmly. Set up your bench in a consistent order so instruments are where you expect them. Read the task sheet fully, note the time limits and scoring points, and ask the invigilator about anything ambiguous before you begin.
Work to your rehearsed sequence and check the clock at fixed checkpoints rather than constantly. Keep the bench organized and clean as you go, since workmanship and orderliness are often scored. If a step fails or equipment breaks, stop, notify the invigilator immediately, and follow their instruction rather than improvising silently. Leave time at the end to verify the required dimensions, finish, and documentation before submission.
Rules to check
Carry the required photo ID and admission documents at all times; the accepted ID types and the consequences of missing documents are set by the provider, so confirm them in advance.
Follow the invigilator's instructions on start, stop, and submission. Work after the stop signal or continued finishing after submission is typically penalized - confirm the exact rule with the provider.
Use only permitted tools, materials, and aids. Declare any pre-fabricated parts or purchased components, and ask before using anything not on the approved list.
Report equipment failures, material defects, and injuries immediately. Do not borrow tools or materials from other candidates unless the invigilator explicitly allows it.
Break and restroom rules vary by provider and by station; ask at the start how breaks are handled and whether the clock stops. Do not leave the bench without permission.
Keep phones, smartwatches, and other connected devices stored as instructed; recording or photographing tasks or other candidates' work is generally prohibited - confirm the provider's policy.
Scoring is based on the published assessment criteria, including dimensional accuracy, fit, function, finish, and workmanship. Read the criteria and allocate time to the points that carry the most weight.
If you believe an assessment condition was unfair, ask the invigilator to record the issue on the day and follow the provider's stated appeal or review procedure afterward.