Cert III Motorcycle Mech study guide
Cert III Motorcycle Mech · Work through your exam, one topic at a time.
The AUR30820 Certificate III in Motorcycle Mechanical Technology is an Australian vocational qualification reflecting the role of individuals who perform a broad range of tasks on a variety of motorcycles in the automotive service and repair industry. It suits people working in, or preparing to work in, motorcycle service and repair workshops who need trade-level diagnostic and repair skills rather than routine servicing alone. The qualification requires 36 units: 23 core units plus 13 elective units. All 13 electives may be drawn from the listed elective units, and up to 6 units may come from a Certificate II qualification or above in this Training Package or another endorsed Training Package or accredited course. Topics on this exam: Core units and Elective units. The Cert III Motorcycle Mech study guide has 2 sections and about 647 words.
01Core Units: Safety, Tools, Measurement and Engines
Core units test the knowledge every motorcycle technician needs before touching a customer machine: workplace health and safety, environmental duty of care, hand and power tool use, precision measurement, and basic four-stroke engine theory. Expect questions on isolation of stored energy, correct lifting, personal protective equipment, waste segregation, and the safe use of lifting equipment and stands. Understand the hierarchy of hazard control and be able to name common workshop hazards: exhaust gas, fuel vapour, hot surfaces, rotating parts, battery acid, and compressed springs in suspension. Know the four-stroke cycle (induction, compression, power, exhaust) and valve timing basics.
321 words, about 2 min02Elective Units: Fuel, Ignition, Brakes, Suspension and Driveline
Elective units go deeper into systems: fuel and induction, ignition and electrical, braking, suspension and steering, and driveline and final drive. Questions tend to be diagnostic: given a symptom, identify the likely cause and the correct test. For fuel systems, understand carburettor circuits (pilot, needle, main, choke) and electronic fuel injection inputs such as throttle position, manifold pressure, and oxygen sensors. For ignition, know coil, plug gap, and the difference between CDI and inductive systems.
326 words, about 2 min