High Risk Work Licence - Slewing Mobile Crane C6 (60t) exam-day guide
High Risk Work Licence - Slewing Mobile Crane C6 (60t) · Prepare for the day ahead.
Your checklist
Photo identification
Bring the original government-issued photo ID that matches the name on your booking. Confirm with the provider which forms of ID they accept and whether a digital licence is acceptable, as this varies by provider and state.
Assessment booking confirmation
Carry your booking or enrolment confirmation (printed or on your phone) so the assessor can match you to the correct assessment event and licence class.
Safety boots and high-visibility clothing
Wear steel-capped boots and a high-visibility shirt or vest; most assessment sites require them for access to the yard. Confirm the provider's minimum dress standard when you book.
Hard hat, gloves and eye protection
Bring your own PPE where you have it. Some providers supply shared PPE, but confirm with the provider whether you must bring your own helmet, gloves and safety glasses.
Completed pre-assessment paperwork
If the provider sent a health, fitness or experience declaration, complete it before the day and bring it. Ask the provider whether any medical or fitness-for-work declaration is required for your situation.
Knowledge of the crane you will operate
Review the load chart, controls and safety devices for the crane type used at the assessment site. Ask the provider in advance which crane model or configuration is used so you can prepare.
Sleep, hydration and no alcohol or drugs
Arrive rested and free of alcohol and any impairing substances. If you take prescription medication that may affect alertness, discuss it with the provider and your doctor beforehand.
Arrive early with time to spare
Plan to arrive well before your start time to allow for sign-in, site induction and pre-start checks. Confirm the exact arrival time and site access arrangements with the provider.
Know the site address and access route
Confirm the assessment location, parking and gate entry, since training yards are often in industrial areas with limited signage. Call the provider if the location is unclear.
Plan for weather and sun protection
Much of the assessment happens outdoors. Bring water, a hat and sunscreen, and confirm with the provider whether the assessment proceeds in rain or high wind.
Plan the day
Re-read the load chart and operator manual for the crane class, and practise reading net capacity for the configurations you expect (boom length, radius, counterweight, outrigger or pick-and-carry mode). Review the hand signals and your routine for pre-start inspections and hazard identification. Confirm your booking time, site address, what to bring and any PPE requirements with the provider. Check that your photo ID is current and that your name matches the booking.
Confirm travel time and transport, and check for road or site access issues. Prepare your clothing, boots, PPE, water and paperwork in one bag. Avoid heavy physical work or late nights, and do not drink alcohol. If you feel unwell, contact the provider to ask about rescheduling rather than attending impaired.
Eat a proper meal, take only medication you normally need, and arrive early. At sign-in, present your ID and complete any induction. Listen carefully to the assessor's briefing on the sequence of tasks, exclusion zones, communication methods and stop-work signals, and ask clarifying questions before you begin.
Work through each task in the order the assessor directs. Complete a pre-start inspection and report defects before operating. Set up the crane correctly, check the load chart for every lift, confirm rigging and load security, and use the agreed signals and communication. Keep people clear of the slew radius and suspended loads, move controls smoothly, and verbalise your checks where the assessor expects it. If you make an error, stop safely, reset and continue calmly rather than rushing to catch up.
Rules to check
Follow all site rules and the assessor's directions at all times. The assessor's stop signal or instruction to halt a task is final, and continuing after a stop signal can end your assessment.
Present valid original photo ID at sign-in. If your ID does not match the booking or is not accepted, you may not be able to be assessed; confirm the provider's ID requirements before the day.
Wear the required PPE and clothing for the whole assessment. You may be refused access to the operating area without it, so confirm the standard with the provider in advance.
Do not operate the crane or enter the assessment area under the influence of alcohol, drugs or anything that impairs your alertness. Disclose any medication or health condition that could affect safe operation to the provider beforehand.
Ask the provider about break arrangements and timing, since assessment sessions vary in length. Tell the assessor promptly if you need to stop for health, safety or welfare reasons.
Scoring is based on the assessor's observation of your performance against the unit's performance criteria, including safety, communication, setup, load chart use and control. Ask the provider how results are recorded and when you will be notified.
If you believe an assessment decision was affected by something outside your control, such as equipment failure or unsafe site conditions, raise it with the assessor and the provider through their complaints or appeals process. Confirm that process with the provider.
Do not coach, film or interfere with other candidates, and keep clear of areas where others are operating. Photography and mobile phone use on site may be restricted; confirm the provider's policy.