Basic Scaffolding (SB) case studies
Basic Scaffolding (SB) · Put your knowledge to work in context.
The Basic Scaffolding (SB) credential is an entry-level certification for workers who build, alter, inspect, and dismantle supported scaffolds on construction and industrial sites. It is aimed at new scaffolders, general laborers moving into scaffold work, and tradespeople who erect access platforms as part of their duties. The Basic Scaffolding (SB) case studies are 5 cases and about 2,020 words.
1Tower on Soft Ground After Rain
A two-lift access tower (frame scaffold, 1.8 m bays) is erected beside a new warehouse to reach a roof edge at 6.4 m. The base plates sit on 50 mm timber sole boards laid directly on compacted fill that was placed three weeks ago.
444 words, about 2 min2Missing Tie and a Tag That Says Safe
During a walk-round you find a frame scaffold along a building facade at 9 m height. The scaffold tag at the access point is green and dated this morning, signed by a labourer who is not a scaffolder.
379 words, about 2 min3Calculating Leg Load for a Loaded Lift
A scaffold designer is checking a 1.8 m wide, 2.0 m long bay of a frame scaffold. The working lift will carry a distributed load of 3.0 kN/m² over the full bay plus two point loads of 1.5 kN each from a mortar tub and a block stack.
425 words, about 2 min4Dismantling Over a Live Entrance
A 12 m high independent scaffold wraps a three-storey office refurbishment. The ground floor entrance must stay open for tenants, and a covered walkway protects pedestrians.
365 words, about 2 min5Guardrail Gap at a Loading Bay
On a scaffold loading bay at 4 m, the guardrail has been removed across a 2.4 m opening to allow pallets to be landed. The bay has a toe board on the outer edge but none at the opening.
407 words, about 2 min