Type B Gasfitting (VIC) exam-day guide
Type B Gasfitting (VIC) · Prepare for the day ahead.
Your checklist
Photo ID matching your enrolment
Bring the original current ID the provider asked for (typically a passport or driver licence). Confirm with the provider which forms of ID it accepts and whether a digital licence is allowed; do not assume.
Enrolment or booking confirmation
Print or save the confirmation showing your name, the assessment date, time and venue. It helps resolve any check-in query quickly.
Venue location and travel plan
Confirm the address and arrival time with the provider, including which entrance to use and where to park or which public transport to take. Do a trial run if the venue is unfamiliar.
Personal protective equipment
Bring safety boots, safety glasses and any other PPE the provider specifies. Confirm the exact PPE list and any clothing restrictions with the provider before the day.
Hand tools as specified by the provider
Bring the tool list issued with your enrolment. Check each item works and is clean. Confirm with the provider whether tools are supplied or you must bring your own, and whether any tools are prohibited.
Calculator and writing materials
Bring a non-programmable calculator if permitted, plus pens and a notebook if allowed. Confirm with the provider what is permitted in the assessment area.
Current reference documents if allowed
If the provider permits open-book reference material, bring the current editions it nominates. Confirm with the provider which documents and editions are allowed and whether tabs or notes are acceptable.
Medication, water and a snack
Bring any personal medication you may need and drinking water. Confirm with the provider whether food and drink are allowed in the assessment area and what break arrangements apply.
Review the assessment structure
Re-read the provider's candidate information so you know the format, the number of practical tasks, time limits and how marks are allocated. Confirm any details you are unsure of with the provider.
Rehearse core practical routines
Practise the common gasfitting tasks you have been trained in, such as pressure testing, purging, leak testing, flame failure checks and safe isolation, following the procedures your training provider teaches.
Plan for fatigue and timing
Get a normal night's sleep, eat before you arrive and allow buffer time for traffic. Arrive early rather than exactly on time.
Confirm late-arrival and absence rules
Ask the provider in advance what happens if you are late, unwell or unable to attend, and whether any rebooking or fee rules apply. Treat this as needs_review until confirmed in writing.
Plan the day
Confirm the venue address, arrival time, ID requirements, PPE and tool list with the provider in writing. Print or save your booking confirmation. Re-read the candidate information pack and note anything unclear so you can ask before the day.
Check all tools and PPE: boots in good condition, safety glasses unscratched, calculator working, pens supplied. Replace anything missing now rather than on the morning.
Run two or three timed practice sessions on the core routines you have been taught, talking through each step aloud as you would during assessment. Focus on safe isolation, testing sequence and recording results accurately.
Do a light revision pass over key procedures and formulas rather than cramming new material. Confirm your travel plan and set two alarms. Prepare your bag with ID, confirmation, PPE and tools by the door.
Eat a normal meal, avoid alcohol, and go to bed at your usual time. If you feel unwell, check the provider's illness policy before the morning rather than after.
Eat breakfast, dress in work clothing suitable for practical tasks, and leave with buffer time. Recheck you have your ID, confirmation, PPE and tools before departing.
Check in at the stated location, present your ID and confirmation, and follow the assessor's instructions for storing belongings. Ask where amenities are before the assessment begins.
Listen carefully to each brief, read written instructions fully, and plan each task before touching equipment. Work safely and methodically, record test results as you go, and clean up as instructed.
If a task is unclear, ask the assessor for clarification on the instruction, not for the answer. If equipment fails, stop and report it rather than improvising.
Follow the provider's sign-out process, return any borrowed equipment, and ask when and how results will be issued. Note any feedback given while it is fresh.
Rules to check
Bring the original photo ID specified by the provider and present it at check-in. If you do not have acceptable ID, you may be refused entry, so confirm the accepted forms with the provider beforehand.
Follow all site safety instructions from the assessor, including PPE, isolation and housekeeping requirements. Unsafe conduct can end your assessment.
Work only on the tasks and equipment you are directed to. Do not touch other candidates' work, tools or test rigs.
Ask the assessor to clarify instructions if something is unclear, but do not ask for answers or hints. Do not communicate with other candidates during the assessment.
Keep phones and smart devices switched off and stored as directed unless the provider permits otherwise. Confirm the provider's device policy in advance.
Breaks are usually only as the provider schedules them. Confirm with the provider whether unscheduled breaks are allowed, how to request one, and whether the clock stops.
Scoring and pass marks are set by the provider and the regulator. Ask the provider how marks are allocated and what the pass requirements are; do not rely on hearsay.
If you believe an assessment condition was unfair or equipment was faulty, raise it with the assessor at the time and follow the provider's appeals or review process afterwards.