CT Crane Operator study guide
CT Crane Operator · Work through your exam, one topic at a time.
The Connecticut crane operator credential is a state-level licensing requirement for people who operate hoisting equipment in Connecticut. It is aimed at operators running lattice-boom, telescoping-boom, tower, and other hoisting machines on construction, utility, and industrial sites, and at the employers and signal persons who work alongside them. The CT Crane Operator study guide has 7 sections and about 2,970 words.
01Occupational Safety and Health Regulations and Standards for Hoisting Equipment
This domain asks you to separate legal minimums from consensus standards and to place duties on the right role. Expect questions on OSHA 29 CFR 1926 Subpart CC scope, operator qualification, competent and qualified persons, and Connecticut licensing.
412 words, about 2 min02Crane Types, Components, and Load Charts
This domain checks whether you can identify crane configurations and read the chart for the exact setup in front of you. Questions often give a boom length, radius, quadrant, outrigger condition, and deductions, then ask for the allowable load.
462 words, about 2 min03Rigging, Slings, and Below-the-Hook Devices
This domain tests whether you can select and inspect rigging for the load, calculate tension in angled slings, and recognize when a below-the-hook device changes the lift. Expect questions on working load limit (WLL), hitch types, sling angle, hardware, and inspection rejection criteria.
456 words, about 2 min04Pre-Operational Inspection, Setup, and Site Conditions
This domain tests the shift inspection, setup decisions, and ground conditions that must be controlled before the first load. Expect questions on inspection types, outrigger blocking, leveling, swing radius, and site hazards.
398 words, about 2 min05Safe Operating Procedures, Signals, and Load Handling
This domain tests standard signals, signalperson authority, load control, travel and swing rules, and fall-zone protection. Expect questions on who may give signals, when to stop, and how to handle an uncontrolled load.
407 words, about 2 min06Power Line Safety and Electrical Hazards
This domain tests clearance distances, the difference between the default rule and the Table A alternative, spotter duties, and emergency response after contact. Expect voltage-based questions and questions about what counts as part of the equipment.
440 words, about 2 min07Maintenance, Recordkeeping, and Accident Prevention
This domain tests maintenance schedules, inspection records, operator certification records, and the systems that prevent repeat accidents. Expect questions on who may repair a crane, what must be documented, and how near-miss reporting fits into prevention.
395 words, about 2 min