CT Fire Alarm study guide
CT Fire Alarm · Work through your exam, one topic at a time.
The Connecticut Fire Alarm Technician license is a credential administered through the Connecticut Department of Consumer Protection (DCP), the state agency responsible for occupational licensing in Connecticut. This page is an independent study resource for candidates preparing for that credential; it is not affiliated with, endorsed by, or operated by the State of Connecticut or DCP. The exam content is organized into five equally weighted domains: fire alarm systems and code requirements; electrical theory and power supplies; initiating devices and detection; notification appliances and circuits; and installation, wiring, and testing. Each domain carries roughly 20 percent of the content, so a candidate cannot pass on strength in one area alone. The CT Fire Alarm study guide has 5 sections and about 2,022 words.
01Fire Alarm Systems and Code Requirements
This domain tests how a Connecticut fire alarm system is classified, designed, documented, and accepted under the adopted fire code and its referenced standards, chiefly NFPA 72. Expect questions on signal types, protected-premises versus supervising-station arrangements, plan review, and the authority having jurisdiction’s role.
378 words, about 2 min02Electrical Theory and Power Supplies
This domain tests the electrical calculations behind a reliable fire alarm system: Ohm’s law, series and parallel loads, notification appliance circuit voltage drop, primary and secondary power, and battery sizing. Questions often require a calculation, not just a definition.
421 words, about 2 min03Initiating Devices and Detection
This domain tests selection, spacing, and application of initiating devices: smoke detectors, heat detectors, manual pull stations, waterflow switches, valve tamper switches, and duct detectors. Expect layout questions and questions that distinguish detection from supervisory input.
396 words, about 2 min04Notification Appliances and Circuits
This domain tests audible and visible notification: dBA requirements, candela selection, mounting height, synchronization, NAC loading, voltage drop, and intelligibility for voice systems. Expect questions that combine layout with circuit performance.
407 words, about 2 min05Installation, Wiring, and Testing
This domain tests how fire alarm circuits are installed, protected, supervised, and tested. Expect NEC Article 760 cable questions, Class A/B wiring, end-of-line supervision, acceptance testing, and documentation of test results.
420 words, about 2 min