FL Fumigation study materials
FL Fumigation study resources

FL Fumigation case studies

FL Fumigation · Put your knowledge to work in context.

The Florida fumigation certification is a credential for pest control professionals who perform structural fumigation in Florida. It is typically pursued by licensed pest control operators and technicians who want to add fumigation services or meet employer or client requirements. The FL Fumigation case studies are 5 cases and about 3,265 words.

1

Underdosed Phosphine Fumigation in a Bagged-Rice Warehouse

A licensed fumigator is treating a 30,000 ft³ warehouse of bagged rice for Indianmeal moth at 78°F and 62% relative humidity. The aluminum phosphide label for this space use specifies 1.0 g of phosphine per cubic meter, a 96-hour exposure, and a minimum concentration of 200 ppm.

750 words, about 4 min
2

Shared Attic and a Clearance Reading That Will Not Drop

A pest control company contracts to fumigate a two-story townhouse with 18,000 ft³ of treated space for drywood termites using sulfuryl fluoride at the label's 1X rate for a 24-hour exposure. The unit shares a common wall and a continuous attic with the attached unit; the firebreak drywall stops about 18 inches below the roof deck.

664 words, about 3 min
3

Methyl Bromide Chamber Fumigation Inside the Buffer Zone

A port fumigator plans to treat a 1,200 ft³ methyl bromide chamber at 3 lb per 1,000 ft³ for a 4-hour exposure. The chamber sits 90 ft from a daycare playground, and the wind is blowing from the chamber toward the daycare at 6 mph.

642 words, about 3 min
4

Sheared Sulfuryl Fluoride Cylinder at a Loading Dock

During tarping of a 40,000 ft³ commercial building, a forklift knocks over a 100-lb sulfuryl fluoride cylinder. The valve shears off, and the cylinder vents in a detached loading dock.

611 words, about 3 min
5

Post-Fumigation Audit: Late Notice, Missing Placard, and a Retroactive Clearance

An FDACS inspector reviews a structural fumigation performed 10 days earlier in a 24,000 ft³ house. The records show sulfuryl fluoride applied at 1X, a 24-hour exposure, and a clearance reading of 0.8 ppm.

598 words, about 3 min