ICC 67 study plan
ICC 67 · Give each week a clear focus.
8 weeks · About 6 hours per week
Fire Inspector II (content domains not published in source)
Map the full ICC 67 Fire Inspector II content outline into a personal checklist and mark each line item as known, shaky, or unknown
Define the inspection-cycle workflow from pre-inspection file review through report issuance, and write each stage in your own words
List the code editions and referenced standards a Fire Inspector II is expected to apply, and note where each is cited
Build a 60-term glossary of inspection and occupancy terminology you cannot yet define from memory
Complete one timed 25-question baseline set and log your score by content area
Your checkpoint
A one-page baseline diagnostic sheet showing per-area scores, a marked-up content outline, and a 60-term glossary draft
Fire Inspector II (content domains not published in source)
Explain how occupancy classification drives inspection scope, and assign a classification to five building scenarios you write yourself
Differentiate construction type limits and fire-resistance requirements and record the decision rules you used
Practice reading a written building description and identifying the applicable code sections without any figures
Draft inspection-order priorities for a hypothetical mixed-use complex and justify each ranking
Your checkpoint
A two-page written analysis of five self-authored building scenarios, each with occupancy class, construction type, and the code logic applied
Fire Inspector II (content domains not published in source)
Sequence the steps for inspecting fire-protection systems, including sprinkler, standpipe, and alarm components, from memory
Identify the documentation an inspector verifies for system acceptance testing and periodic inspection
Distinguish impairment procedures from out-of-service procedures and state when each applies
Write five inspection findings as you would record them in a field report, using objective language
Your checkpoint
A field-style inspection report for a hypothetical building covering at least three systems, with five findings written in compliant objective language
Fire Inspector II (content domains not published in source)
Apply means-of-egress requirements to a written floor description and identify every deficiency
Explain how occupant load is calculated and where the result changes egress requirements
Review hazardous-materials storage and handling rules and list the inspection checkpoints for each hazard class
Reattempt the weak areas from your week 1 diagnostic and compare results
Your checkpoint
A deficiency list of at least 15 items drawn from a self-written floor description, each tied to a requirement and a corrective action
Fire Inspector II (content domains not published in source)
Outline the permit and plan-review process an inspector participates in, from submittal through final inspection
Explain how to conduct a fire-safety exit interview and how to document corrective actions and reinspection
Practice writing a notice of violation with a clear description, code basis, and compliance deadline
Distinguish administrative remedies from legal enforcement escalation steps
Your checkpoint
A complete mock notice-of-violation packet, including the violation description, code citation, corrective action, deadline, and reinspection note
Fire Inspector II (content domains not published in source)
Summarize fire-investigation basics an inspector supports, including scene preservation and evidence documentation
Explain the inspector's role in pre-incident planning and how inspection data feeds it
Review public-education and community risk-reduction duties and describe one program you could support
Identify recordkeeping, reporting, and confidentiality obligations for inspection files
Your checkpoint
A one-page role summary mapping inspection duties to investigation support, pre-incident planning, public education, and records management
Fire Inspector II (content domains not published in source)
Complete two full-length timed practice sets under exam conditions and record per-area results
Convert every missed question into a written rule statement you can recall without notes
Drill the 40 highest-miss terms and requirements until you can state each from memory
Review the standard's structure so you can locate a requirement quickly during open-book portions
Your checkpoint
An error log of every missed item with a corrected rule statement, plus a re-test score comparison against week 1
Fire Inspector II (content domains not published in source)
Take one final timed simulation and confirm per-area scores meet your target threshold
Rehearse a fast lookup routine for locating requirements in the referenced standard
Review your error log and glossary only, avoiding new material
Write a short exam-day plan covering timing, question triage, and flagging strategy
Your checkpoint
A final simulation score report with a one-page exam-day plan and a signed readiness statement listing remaining weak areas
Milestones
Week 2: You can classify five unfamiliar building scenarios by occupancy and construction type and justify each in writing without notes
Week 4: Your week 4 diagnostic score in the weakest area from week 1 has improved by at least 15 percentage points
Week 6: You can produce a complete notice-of-violation packet with accurate code basis in under 30 minutes
Week 8: Final timed simulation meets your target score, and every error-log entry has a written corrected rule statement