LCA Graphics and Construction Studies study guide
LCA Graphics and Construction Studies · Work through your exam, one topic at a time.
LCA Graphics and Construction Studies is a Leaving Certificate Applied subject that combines technical drawing and graphical communication with the materials, methods and safety practices of the construction industry. It suits students who learn best through doing: sketching, drawing to scale, handling materials, and solving practical building problems rather than writing long essays. The LCA Graphics and Construction Studies study guide has 7 sections and about 2,005 words.
01Graphics and Communication
Graphics and Communication tests your ability to read and produce technical drawings that a craftsperson could build from. It covers projection, line conventions, dimensioning, scale and freehand sketching.
317 words, about 2 min02Materials and Their Properties
Materials and Their Properties tests whether you can name a material, describe how it behaves and justify a selection for a real component. Expect property definitions, timber and manufactured board, metals and alloys, plastics, and simple environmental comparisons.
292 words, about 1 min03Construction Principles and Techniques
Construction Principles and Techniques tests your understanding of how small buildings are put together: foundations, walls, floors, roofs, openings and damp control. You need to name components, explain their order and identify where a detail would fail.
296 words, about 1 min04Building Services and Environmental Control
Building Services and Environmental Control tests basic water, drainage, heating, electrical and ventilation systems, and the environmental principles behind them. You should be able to trace a service, state a safety requirement and calculate a simple fall or energy figure.
274 words, about 1 min05Health, Safety and Site Practice
Health, Safety and Site Practice tests whether you can identify hazards, assess risk and describe safe working in a school workshop or on a small site. Expect tool safety, manual handling, electricity, housekeeping, fire and first-aid arrangements.
293 words, about 1 min06Design and Problem Solving
Design and Problem Solving tests the process, not just the final sketch. You need to interpret a brief, state constraints, research user needs, generate and test ideas, and evaluate against the original problem.
266 words, about 1 min07Coursework and Practical Application
Coursework and Practical Application tests how you plan, make, check and document a practical project. The examiner looks for a clear brief, a sensible sequence, accurate marking out, safe machine use, quality joints, a suitable finish and honest evaluation.
267 words, about 1 min