SOLAS Sheet Metalworking study guide
SOLAS Sheet Metalworking · Work through your exam, one topic at a time.
The SOLAS Sheet Metalworking apprenticeship is a craft apprenticeship in Ireland, delivered through the Generation Apprenticeship system and listed among the craft apprenticeship routes on apprenticeship.ie. It is aimed at people who want to train as sheet metalworkers while employed, combining on-the-job experience with off-the-job training at a local apprenticeship provider. The standards-based assessments you sit during the apprenticeship test the knowledge and skills behind the trade across four broad areas: sheet metalworking craft practice, sheet metal fabrication and installation, technical drawing and measurement, and health, safety and workshop practice. Craft practice covers the tools, machines and techniques used to shape, cut, form and join sheet metal. The SOLAS Sheet Metalworking study guide has 4 sections and about 1,070 words.
01Sheet Metalworking Craft Practice
The Sheet Metalworking Craft Practice domain tests the hand and machine skills that turn flat sheet into accurate components: marking out from a datum, cutting, bending, rolling, seam and rivet work, and material identification. Work from a datum edge or centre line; do not chain dimensions from a previously cut edge.
286 words, about 1 min02Sheet Metal Fabrication and Installation
The Sheet Metal Fabrication and Installation domain tests whether you can assemble components that fit, fasten securely, allow for movement, and install to line and level without leaks or corrosion. Dry-fit before final fastening; correct twist and bow with clamps, not force.
250 words, about 1 min03Technical Drawing and Measurement
The Technical Drawing and Measurement domain tests drawing interpretation and dimensional control: orthographic views, first-angle projection, dimensioning and tolerance, development, and correct use of measuring instruments. In first-angle projection, the view from the front is placed above the plan; the left view goes on the right.
239 words, about 1 min04Health, Safety and Workshop Practice
The Health, Safety and Workshop Practice domain tests risk control in a sheet metal shop: machine guarding, safe isolation, hand-tool use, noise and vibration, hazardous substances, manual handling and emergency response. Risk assessment: identify the hazard, decide who may be harmed, rate likelihood × severity, apply controls, record and review.
295 words, about 1 min