Haryana BSEH Secondary NSQF Power exam-day guide
Haryana BSEH Secondary NSQF Power · Prepare for the day ahead.
Your checklist
Admit card / hall ticket (printout)
Carry the admit card issued for the NSQF Power sector practical. Verify the trade/sector, paper code, centre address and reporting time printed on it. If the card has not been released through your school, ask your NSQF instructor or school exam coordinator how to obtain it - confirm with the provider rather than assuming a download portal.
School identity card and one photo ID
Bring your school ID plus a government photo ID such as Aadhaar if you have one. The invigilator may ask for both to match the admit card. If your name spelling differs across documents, confirm with the school office before the exam.
Two or three passport-size photographs
Some practical centres paste a photo on the attendance sheet or practical answer booklet. Carry spare copies, same as the ones used on your admit card. Confirm with the provider whether photographs are required at your centre.
Blue/black ballpoint pens and a pencil with eraser and sharpener
You will write observations, readings and a viva/record sheet by hand. Carry at least two working pens. Do not rely on borrowed stationery during a timed practical.
Simple scientific calculator (non-programmable)
Power-sector practicals often involve Ohm's law, power, energy and efficiency calculations. Use a basic non-programmable calculator. Programmable or graphing calculators and mobile phones are normally not allowed - confirm with the provider what calculator type is permitted.
Practical record / observation file and workbook
If your school has maintained a practical record book for the Power NSQF sessions, carry it if instructed. It may be checked or signed during the viva. Confirm with the provider whether the record book must be submitted before the practical.
Prescribed safety gear for the trade
For electrical/power work this typically means closed shoes (ideally safety shoes), and any safety glasses or gloves the school has issued for the activity. Loose clothing, metal watches, rings and dangling jewellery should be removed before handling live or rotating equipment.
Written summary of key formulae and safety steps
Prepare a one-page revision sheet for your own use during the final 24 hours: Ohm's law, power and energy relations, series/parallel resistance, meter connections, earthing and isolation steps. Do not carry it into the practical hall unless the provider allows notes.
Water bottle and a light snack
Practical sessions can run long with waiting time. Carry water in a clear bottle if the centre permits. Confirm with the provider whether food or drink is allowed in the laboratory area.
Reporting-time plan and contact number
Note the exact reporting time and the name/phone number of your school coordinator. Plan to reach the centre well before the reporting time, since late entry is often refused. Confirm with the provider the entry cut-off for your batch.
Told your school about any medical condition
If you have a condition affecting standing for long periods, handling tools, or working near electrical equipment, inform your instructor in advance so the centre can plan. Confirm with the provider what support is available - do not assume accommodations.
Checked the practical syllabus and marking scheme
Ask your NSQF instructor which activities and skills are assessed (for example wiring, measurement, testing, tool use, safety procedure and viva). Knowing the weighting helps you allocate time during the test. Confirm with the provider the exact assessment scheme for your batch.
Plan the day
Confirm logistics: re-read the admit card for centre address, reporting time and trade, and check the route and travel time. Ask your coordinator to confirm the batch timing and whether the practical record book or any project file must be submitted. Rehearse the core practical skills you have practised in class - meter connection and reading, basic wiring or testing steps, and the safety sequence for isolation and earthing - rather than reading new topics. Re-read your practical record book and note any viva questions your instructor flagged.
Do a timed dry run of the most likely task using your own tools and meter under supervision, and write out the observation table and calculation steps from memory. Review the safety rules you must state aloud: switch off and isolate, test dead, use insulated tools, do not work alone on live circuits, and report faults. Pack your bag with admit card, IDs, photographs, pens, pencil, calculator and safety shoes so nothing is left to the last morning.
Stop heavy revision and consolidate: read your one-page formula and safety sheet twice, then put it away. Check the weather and travel plan, charge your phone but plan to switch it off at the centre, and set two alarms. Sleep at a normal hour - fatigue causes wiring and measurement mistakes. Confirm with the provider any last-minute change of centre or timing by checking with your school coordinator, not social media.
Eat a proper meal, wear closed shoes and simple clothing with no loose sleeves or metal jewellery, and carry the packed bag. Reach the centre with a buffer of at least 30–45 minutes before reporting time. At the centre, keep the admit card and ID ready for verification, listen carefully to the invigilator's instructions, and locate your workstation and the location of the main switch and first-aid point before starting.
Read the whole task sheet first and note the marks and time for each part. Before touching any circuit, state and follow the safety steps: identify the supply, isolate, verify dead, and connect earthing where required. Keep your work area tidy, route leads safely, and double-check meter range and polarity before switching on. Record readings as you take them, show units, and write the calculation steps. If a reading looks wrong, re-check the connection rather than inventing a value. Answer viva questions briefly and honestly; if you do not know, say what you would check. Before time is called, switch off and isolate, restore the bench, and check that your name and roll number are on every sheet you hand in.
Rules to check
Carry and display the admit card and a photo ID whenever asked. Candidates without valid documents may not be allowed to sit the practical - confirm with the provider what happens in that case.
Follow the invigilator's and instructor's safety instructions without exception. Do not energise any circuit, machine or tool until you have been cleared to do so, and never work on a circuit you believe is live.
Mobile phones and smart devices must normally be switched off and kept away from the workbench. Confirm with the provider whether phones may be kept in a bag at the centre.
Do not exchange tools, readings, answers or help with other candidates. Practical work and viva answers must be your own; copying another candidate's observation table is treated as unfair means.
Ask permission before leaving the hall. Short toilet breaks are usually allowed with an escort, but you will not normally get extra time, and you may not leave the centre until the session ends - confirm with the provider the break policy for your batch.
Handle tools, meters and equipment as demonstrated and report any damage or fault immediately. You may be held responsible for damage caused by careless or unauthorised use.
Marks are awarded for correct procedure, safety, accuracy of readings, neat records and viva responses, not only for a working final result. A safely completed partial task usually scores better than an unsafe complete one.
Follow the centre's dress and conduct rules, and do not carry any unauthorised notes or reference material into the practical area unless the provider has explicitly permitted it.