Odisha CHSE +2 Vocational Modelling and Sculpture case studies
Odisha CHSE +2 Vocational Modelling and Sculpture · Put your knowledge to work in context.
The Odisha CHSE +2 Vocational programme in Modelling and Sculpture is a higher-secondary vocational trade subject, taken alongside general +2 subjects, that builds hands-on skill in three-dimensional form-making. It suits students who want a practical, studio-based qualification rather than a purely academic route: school leavers preparing for art-school entrance, aspirants to artisan or craft-sector work, and anyone planning to set up as a studio modeller, mould-maker, or decorative sculptor. The Odisha CHSE +2 Vocational Modelling and Sculpture case studies are 5 cases and about 3,333 words.
1Plaster Dust, a Blocked Sink and a Hot-Air Gun
At the end of a 90-minute vocational workshop slot, 18 Class XII students have finished a plaster-of-Paris modelling exercise. One student rinsed two mixing bowls and a spatula in the workshop's only sink; the drain is now running slowly and a white sludge is visible in the trap.
717 words, about 4 min2Enlarging a Seated Figure for a 90 cm Relief Panel
An examinee has made a 4B pencil study of a seated woman on A4 paper (210 × 297 mm). The figure measures 24 cm from head to heel and the head is 3 cm high.
682 words, about 3 min3A Cracking Clay Bust Before the Kiln Booking
A 28 cm clay portrait bust was modelled over a crumpled newspaper core taped to a wooden board, with a 4 mm aluminium armature wire running from the board through the neck. It was left on a bench beside an open window on Friday.
625 words, about 3 min4Bubbles, a Broken Wheel and a Locked Plaster Mould
A student has made a 30 × 40 cm clay relief of a temple chariot with deep undercuts beneath the wheels and the canopy. A two-part plaster waste mould was made by building a clay shim, but no release agent was applied between the two plaster halves.
654 words, about 3 min5A Safe, Honest Dhokra-Style Figure for the Craft Fair
A student wants to submit a 15 cm 'Dhokra-style' figurine of a standing tribal woman for the school's Odisha craft fair. The art teacher has shown images of lost-wax brass castings from Bastar and Mayurbhanj and has explained that local artisans build a beeswax model over a clay core, invest it in river clay mixed with rice husk, heat it to melt out the wax, and pour molten bronze.
655 words, about 3 min