Odisha CHSE +2 Vocational EDA (Electrical Domestic Appliances) exam-day guide
Odisha CHSE +2 Vocational EDA (Electrical Domestic Appliances) · Prepare for the day ahead.
Your checklist
Printed admit card / hall ticket
Carry the admit card issued through your school or the CHSE portal. Check that your name, roll number, subject (EDA) and exam centre match your records. If the admit card has not arrived or shows an error, contact your school immediately - do not wait until exam morning.
School ID card and one photo ID
Bring your school identity card plus one additional photo ID (Aadhaar, etc.) as backup. The exact list of accepted IDs is set by the exam authority - confirm with the provider/school which documents are mandatory.
Passport-size photographs
Carry two or three recent photographs matching the one on your admit card; they are sometimes needed for the attendance sheet or practical record. Confirm the required number with your school.
Practical record / laboratory notebook
Bring the fair practical record with all experiments written up, signed and dated by the teacher. Many vocational practicals award marks for the record, so an incomplete or unsigned file can cost you directly.
Completed and signed project or job work
If your syllabus requires a project, repaired appliance, or assembled circuit, bring it finished and labelled with your name and roll number. Confirm with the provider whether project submission happens before or during the practical.
Basic hand tools in a labelled pouch
Screwdrivers (flat and Phillips), pliers, wire cutter/stripper, spanner set, test lamp or multimeter if permitted, insulation tape, and a small torch. Keep them in a pouch marked with your roll number so nothing is lost or borrowed.
Writing materials
Blue/black pen, pencil, eraser, sharpener and a scale for drawing circuit diagrams and writing observations. Carry a spare pen.
Simple calculator and watch
A non-programmable calculator helps with voltage, current, resistance and power calculations. A wrist watch (not a smartwatch or phone) helps you pace the viva and job sections.
Dress code and safety habits
Wear the prescribed uniform or simple formal clothing and closed shoes. Tie back long hair and remove rings, watches and loose metal items before working on any live or mains-connected apparatus.
Know your exam centre and reporting time
Confirm the centre address, reporting time and batch/slot with your school at least two days earlier. Visit or map the route in advance; arrive before the reporting time, since late entry rules are set by the centre.
Read the practical question/instruction sheet carefully
On the day you will usually be given a set of tasks (identify components, test an appliance, wire a circuit, answer viva questions). Read the whole sheet before starting so you can plan the order and time.
No prohibited items
Leave mobile phones, smartwatches and study notes outside the hall unless the centre explicitly allows them. Ask the invigilator where to keep your bag; do not keep it at the workbench.
Plan the day
Finish and get signed any pending practical record pages, graphs and observations. Re-check the admit card details and the centre address. Ask your teacher to confirm the exact list of tools, project items and documents your centre expects, since these vary by centre.
Revise the core EDA topics that viva examiners commonly ask: identification and function of components (resistor, capacitor, inductor, diode, fuse, thermostat, heating element, motor, capacitor-start arrangement); working principles of common domestic appliances (electric iron, heater, fan, mixer-grinder, refrigerator, washing machine, microwave); basic electrical quantities and Ohm's law and power formulae; earthing, fuse rating and safety precautions; common faults and their remedies.
Practise the physical skills: stripping and terminating wires neatly, making safe joints, using a multimeter to check continuity and resistance, identifying appliance parts, and explaining a circuit diagram aloud. Practise each task once with a timer so you know your pace.
Pack the tool pouch, record, project and stationery. Plan the travel route and an alternative. Sleep on a normal schedule; do not stay up late the night before.
Do a final checklist against the admit card: documents, photos, tools, record, project, uniform. Charge nothing that is prohibited - leave the phone at home or plan to hand it in. Re-read your record's key experiments and the safety rules. Confirm the reporting time once more with a classmate or teacher.
Eat a proper meal, wear the uniform and closed shoes, and reach the centre well before reporting time. Keep the admit card and ID in one envelope. On arrival, locate the notice board for your batch and seat/workbench allotment, and follow the invigilator's instructions.
Read the entire question/instruction sheet. Note the marks for each part and the time allowed. Check that the tools and components at your bench are complete and undamaged; report missing or faulty items to the invigilator before starting.
Work in a planned order: identification and testing first, then wiring/assembly, then measurements and observations. Follow safety rules strictly - switch off and isolate before touching connections, never work on live mains, and keep the bench tidy. Write observations as you go rather than at the end.
Answer viva questions briefly and correctly; if you do not know, say so politely rather than guessing. Be ready to explain what you did, why, and what could go wrong. Show your record and project neatly when asked.
Re-check your work, complete any unfinished diagram or table, and make sure your name and roll number are on every sheet and on the project. Switch off and disconnect apparatus, return borrowed tools, and leave the bench as you found it. Hand over your answer sheets to the invigilator before leaving.
Rules to check
Carry your admit card and the prescribed photo ID at all times in the hall; entry without them may be refused. The exact accepted ID list is set by the authority - confirm with the provider or your school beforehand.
Follow the centre's dress code and safety instructions. Remove loose metal jewellery and tie back long hair before handling apparatus; closed footwear is expected in the workshop.
Do not use mobile phones, smartwatches or any unauthorised notes or devices in the practical hall. Keep bags and phones where the invigilator directs; possession of prohibited items during the exam may be treated as malpractice.
Work only on the apparatus and components allotted to you. Do not borrow tools or components from another candidate without the invigilator's permission, and never interfere with another candidate's work.
Safety violations - touching live mains, bypassing a fuse or earth, or careless handling of heating appliances - can lead to your work being stopped. Isolate the supply before making or changing connections.
Ask the invigilator before leaving the hall for water, toilet or any other reason; re-entry and break rules are decided by the centre, so confirm with the provider if you have a medical need.
Marks are awarded separately for the practical job, the record/project and the viva; keep all three complete and correctly labelled with your name and roll number. Scoring weightings are set by the board - check the current scheme with your school rather than relying on hearsay.
If you believe a question is wrong, a component is faulty, or you are treated unfairly, raise it calmly with the invigilator at that moment. Do not argue with exam staff or discuss the paper with others during the exam.