ITI/NCVT Painter General (AITT Theory) study materials
ITI/NCVT Painter General (AITT Theory) study resources

ITI/NCVT Painter General (AITT Theory) case studies

ITI/NCVT Painter General (AITT Theory) · Put your knowledge to work in context.

The ITI/NCVT Painter General All India Trade Test (AITT) is the theory examination sat by trainees completing the Painter General trade under the Craftsman Training Scheme. It tests trade theory - the knowledge behind surface preparation, paint composition, application, spray work, decorative finishes, fault diagnosis, colour matching, protective coatings and estimation - rather than workshop skill, which is assessed separately in practical and allied trade tests. The ITI/NCVT Painter General (AITT Theory) case studies are 5 cases and about 5,014 words.

1

Two Guns, One Small Compressor: Pressure Collapse, Orange Peel and Solvent Vapour

Two painters in a small jobbing shop are refinishing a batch of 60 steel almirahs. Both guns are fed from one portable compressor: 2 HP single-phase motor, 50-litre receiver, rated free air delivery 200 L/min at 7 bar.

1,085 words, about 5 min
2

Quoting a School Exterior Repaint: Areas, Litres and a Lump Sum

A contractor must quote for repainting the external cement-plaster walls of a single-storey primary school. The building is 24 m long and 12 m wide.

913 words, about 5 min
3

Epoxy Self-Levelling on a Damp Slab over Old Alkyd: Blisters at 36 Hours

A 96 m² workshop floor (12 m × 8 m) in a coastal town was previously sealed with a solvent-borne alkyd gloss. The floor was swept, degreased with a water-based alkaline detergent, hosed down and left to dry overnight.

1,007 words, about 5 min
4

Sa 2½ Blasting and Zinc Silicate Primer: A Dew Point and Salt Contamination Decision

A fabrication yard is blasting and priming the internal surfaces of new steel box girders for a highway bridge. The specification calls for blast cleaning to Sa 2½ and a zinc-rich primer, with the coating system chosen for corrosivity category C4.

991 words, about 5 min
5

Metameric Orange: A Rejected Batch of Machine Guards

A paint shop must supply 40 identical welded steel machine guards in 'safety orange' to match a customer's approved master panel. The shop has no spectrophotometer of its own but can borrow a portable one from a neighbouring laboratory once.

1,018 words, about 5 min