I85PREP
⌘ K
India Learner's Licence Test (LLR) study materials
India Learner's Licence Test (LLR) study resources

India Learner's Licence Test (LLR) practice questions

One question at a time. Build your India Learner's Licence Test (LLR) understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic signs, signals and road markings

You are approaching a circular sign with a red border and a white centre showing the numeral 50. What does this sign require of you?

  1. You must slow to 50 km/h only when a police officer signals
  2. You must drive at exactly 50 km/h
  3. You may drive at 50 km/h only in the left lane
  4. You must not exceed 50 km/h on this stretch Correct answer.

Explanation

A circular sign with a red border is a mandatory (regulatory) sign, and the number inside gives the maximum permissible speed. It is a ceiling, not a target, so you may lawfully drive slower when conditions demand it. The restriction applies to the whole carriageway unless a separate plate says otherwise.

Question 2Traffic signs, signals and road markings

A triangular sign with a red border shows a black symbol of a person walking. How should you respond when you see it ahead?

  1. Expect pedestrians ahead and be ready to slow or stop Correct answer.
  2. Treat it as a parking zone for pedestrians only
  3. Sound the horn continuously until pedestrians move away
  4. Accelerate past the area before pedestrians step out

Explanation

A triangle with a red border is a warning sign, so the symbol tells you about a hazard ahead rather than imposing a prohibition. A pedestrian symbol warns that people may be crossing or walking along the road, so you reduce speed and prepare to give way. Warning signs are placed in advance of the hazard to give you time to react.

Question 3Traffic signs, signals and road markings

At a signal-controlled junction the traffic light shows a steady red circle with no arrow. What is the correct action?

  1. Proceed slowly if no vehicle is visible
  2. Sound the horn and continue at reduced speed
  3. Stop behind the stop line and wait for green Correct answer.
  4. Turn left without stopping if the road is clear

Explanation

A steady red circle means stop, and you must halt before the stop line, or before the crossing if there is no line. You remain stopped until the signal turns green or a police officer directs you to move. A free left turn is only permitted where a specific sign or signal allows it.

Question 4Traffic signs, signals and road markings

A continuous solid white line runs along the centre of the road next to your lane. What does it mean for overtaking?

  1. You may cross it to overtake any slow vehicle
  2. You must not cross or straddle it to overtake Correct answer.
  3. You may cross it if you flash your headlights first
  4. You may cross it only after dark

Explanation

A continuous solid line is a barrier marking that must not be crossed or straddled, so overtaking that requires entering the opposing lane is prohibited. It is used where visibility or road geometry makes such a manoeuvre unsafe. A broken line, by contrast, may be crossed when it is safe to do so.

Question 5Traffic signs, signals and road markings

A traffic officer stands facing you at a junction with both arms raised and palms towards you. What must you do?

  1. Stop and wait for the officer to change the signal Correct answer.
  2. Proceed as if the light were green
  3. Turn right in front of the officer
  4. Continue only if you are on a two-wheeler

Explanation

Signals given by a police officer on duty override the fixed traffic lights and road markings. Arms raised with palms facing oncoming traffic means stop for the traffic approaching from that direction. You wait until the officer lowers the arms or gives a clear go-ahead.

Question 6Traffic signs, signals and road markings

A sign shows a red circle with a red diagonal bar across a black car symbol. What is the effect of this sign?

  1. Cars must park only in marked bays
  2. Cars may enter only between 10 pm and 6 am
  3. Cars must reduce speed to 20 km/h
  4. Cars are prohibited from entering this road Correct answer.

Explanation

A red circle with a diagonal bar is a prohibitory sign, and the symbol inside identifies what is banned. With a car symbol, the road is closed to cars, typically because it is a pedestrian or restricted street. Other classes of vehicle are governed by whatever other symbols or plates appear.

Question 7Traffic signs, signals and road markings

You see a broken white line separating two lanes travelling in the same direction on a multi-lane road. What does this marking permit?

  1. Driving in either direction in that lane
  2. Lane changing when it is safe to do so Correct answer.
  3. Parking in the lane during off-peak hours
  4. Overtaking only on the left-hand side

Explanation

Broken white lines between lanes of the same direction of travel simply divide the lanes and may be crossed when you change lanes safely. You must still signal, check mirrors and blind spots, and ensure the new lane is clear. They do not indicate direction of travel or parking rights.

Question 8Traffic signs, signals and road markings

A flashing red light is shown at a level crossing. What does this require of a driver approaching it?

  1. Stop completely and proceed only when the light stops flashing Correct answer.
  2. Proceed with hazard lights on
  3. Wait for a green light before crossing
  4. Slow down and cross if the barrier is still up

Explanation

A flashing red signal at a level crossing means stop and stay stopped, because a train is approaching or the crossing equipment is active. You may proceed only after the lights stop flashing and any barrier is fully raised. Never attempt to cross around a lowered or moving barrier.

Question 9Traffic signs, signals and road markings

You are driving and see a pedestrian waiting at a marked zebra crossing. What is the correct course of action?

  1. Slow down and give way to the pedestrian on the crossing Correct answer.
  2. Speed up so the pedestrian waits for you
  3. Stop only if a traffic light also turns red
  4. Drive around the pedestrian by using the opposite lane

Explanation

Zebra crossings give pedestrians priority, and drivers must slow down and stop to let them cross. Approaching a crossing you should also avoid overtaking another vehicle that has stopped there, since it may be yielding to someone you cannot see. Courtesy and anticipation prevent the most common pedestrian collisions.

Question 10Traffic signs, signals and road markings

An overhead lane signal on your lane shows a red cross (X). What does it mean?

  1. The lane may be used only for overtaking
  2. The lane is open but has a lower speed limit
  3. The lane is reserved for buses
  4. The lane is closed and you must move to another lane Correct answer.

Explanation

A red cross displayed over a lane means that lane is closed to traffic, typically because of an incident, roadworks or a hazard ahead. You must leave the lane safely and continue in a lane showing a green arrow or no prohibition. Ignoring the cross puts you and others at risk and is an offence.

Question 11Traffic signs, signals and road markings

A yellow box junction is painted at an intersection. When may you enter the marked area?

  1. Whenever the light ahead is green, regardless of traffic
  2. Only when you intend to turn right
  3. Whenever no vehicle is directly in front of you
  4. Only when your exit from the box is clear Correct answer.

Explanation

A yellow box marking means you must not enter it unless your exit is clear, so that you do not block the junction when traffic stops. The purpose is to keep cross traffic and turning vehicles moving. If the far side is congested, you wait before the box even if your light is green.

Question 12Traffic signs, signals and road markings

On a hill, you see a sign showing a steep gradient triangle with the figure 10% beneath it. What does this tell you?

  1. Only vehicles under 10 tonnes may proceed
  2. The road narrows to 10 feet ahead
  3. The road descends or ascends steeply, so control your speed and gear Correct answer.
  4. The speed limit on the hill is 10 km/h

Explanation

A steep-gradient warning sign alerts you to a sharp rise or fall, and the percentage indicates how steep the slope is. On a descent you should select a lower gear to use engine braking and avoid overheating the brakes. On an ascent you may need a lower gear to maintain momentum safely.

Question 13Traffic signs, signals and road markings

You are on a road with a single broken white line in the centre. A slow lorry ahead is travelling well below the limit on a clear, straight stretch. What is permitted?

  1. Overtake only after the lorry signals you past
  2. Overtake on the left shoulder to stay clear of oncoming traffic
  3. Never overtake on any road with a centre line
  4. Overtake by crossing the broken line after checking it is safe Correct answer.

Explanation

A broken centre line may be crossed for overtaking when visibility is adequate and no oncoming traffic is close. You must judge the gap, signal your intention and complete the manoeuvre without forcing others to change speed or direction. The lorry driver's signal, if any, does not transfer responsibility to them.

Question 14Traffic signs, signals and road markings

A circular blue sign shows a white arrow pointing straight ahead. What is the effect of this sign?

  1. Straight ahead is closed to heavy vehicles
  2. Straight ahead is recommended but optional
  3. You may turn right if no traffic is present
  4. You must proceed straight ahead only Correct answer.

Explanation

A blue circle is a mandatory sign, and the white arrow directs the direction you must take. Here it compels you to continue straight ahead, so turning is not permitted at that point. Blue circles give positive instructions, unlike red circles which prohibit.

Question 15Traffic signs, signals and road markings

You approach a junction where the light is green but the exit road beyond is jammed with stationary traffic. What should you do?

  1. Use the opposite lane to get past the queue
  2. Sound the horn until the queue moves
  3. Wait before the junction until there is room beyond it Correct answer.
  4. Enter the junction and stop in the middle

Explanation

Even on a green light you should not enter a junction unless you can clear it, because stopping in the middle blocks cross traffic and pedestrian routes. Waiting behind the stop line keeps the junction usable for others. This is the same principle that underlies box-junction markings.

Question 16Traffic signs, signals and road markings

A sign shows a black triangle warning of a road narrowing on both sides. How should you adjust your driving?

  1. Accelerate to clear the narrow section quickly
  2. Reduce speed, keep left and be ready for oncoming traffic in the narrow section Correct answer.
  3. Maintain speed and keep to the centre line
  4. Move to the right to get a better view

Explanation

The road-narrows warning tells you the carriageway ahead is constricted, so you slow down and position your vehicle to pass safely. Keeping left and allowing oncoming vehicles room is essential where two vehicles cannot pass easily. Reducing speed buys the time needed to judge the gap.

Question 17Traffic signs, signals and road markings

A traffic light shows a green arrow pointing left while the main circle is red. What does this allow?

  1. Proceed only in the direction of the arrow, giving way as needed Correct answer.
  2. Wait until the main circle turns green before moving
  3. Proceed in any direction because a green light is showing
  4. Proceed straight ahead only

Explanation

A green arrow authorises movement only in the direction it points, even while the main signal remains red for other movements. You may make that turn provided the way is clear and you yield to pedestrians and traffic already lawfully in the junction. The rest of the signal head does not apply to your permitted movement.

Question 18Traffic signs, signals and road markings

You see a stop line painted across your lane together with the word STOP on the surface, but no signal is visible. What must you do?

  1. Stop only if another vehicle is approaching
  2. Slow down and continue if the road looks clear
  3. Stop at the line, then proceed when safe Correct answer.
  4. Treat the marking as a give-way line and roll through

Explanation

A stop line and the word STOP on the carriageway mark a point where you must bring the vehicle to a complete halt before entering the junction. After stopping you proceed only when you have checked that the way is clear. A give-way line, by contrast, requires only that you yield, not a full stop.

Question 19Traffic signs, signals and road markings

A circular sign shows a red border with a black horn symbol crossed by a red diagonal bar. What does it mean?

  1. Sound the horn to warn other road users
  2. Horn use is permitted only at night
  3. Do not use the horn in this area Correct answer.
  4. Only heavy vehicles may sound the horn

Explanation

The red circle and diagonal bar make this a prohibition, and the horn symbol identifies what is banned. Such signs are common near hospitals, schools and silence zones, where noise must be kept down. You may still use the horn if it is genuinely needed to avert immediate danger.

Question 20Traffic signs, signals and road markings

You are driving at night and an oncoming vehicle's headlights dazzle you. What is the safest response?

  1. Flash your high beam continuously until they dip theirs
  2. Slow down, look towards the left edge of your lane and keep your line Correct answer.
  3. Look directly at the lights to judge the distance
  4. Switch off your headlights briefly to reduce the glare

Explanation

When dazzled, you reduce speed and shift your gaze towards the left edge of the road to keep your position without staring into the beam. Maintaining a steady line lets the other driver judge your position and pass safely. Dipping your own lights avoids adding to the glare for them.

Question 21Traffic signs, signals and road markings

A sign shows a red circle containing a black arrow curving to the left with a red diagonal bar across it. What does it prohibit?

  1. Turning right at this point
  2. Reversing into the side road
  3. Turning left at this point Correct answer.
  4. Proceeding straight ahead

Explanation

The arrow inside the circle indicates the movement being regulated, and the diagonal bar turns it into a prohibition. A left-curving arrow barred in this way means you must not turn left there. The sign is typically placed where a left turn would conflict with traffic flow or a one-way street.

Question 22Traffic signs, signals and road markings

On a two-lane road the centre marking is a solid line beside a broken line, with the solid line on your side. What does this permit you to do?

  1. Overtake without crossing the centre marking Correct answer.
  2. Cross only during daylight hours
  3. Cross only if the vehicle ahead is a heavy vehicle
  4. Cross to overtake when the road ahead is clear

Explanation

Where a solid line runs alongside a broken line, the restriction follows the line nearest your vehicle. With the solid line on your side you must not cross or straddle the centre, so overtaking is limited to manoeuvres that stay within your own side. Drivers on the opposite side, who have the broken line, may cross when safe.

Question 23Traffic signs, signals and road markings

A driver approaches a junction where a police officer's raised-arm stop signal conflicts with a green light for that driver's direction. Which instruction governs?

  1. The officer's signal, because it overrides the light Correct answer.
  2. The green light, because signals are automatic
  3. Whichever appears first as the driver approaches
  4. The driver may choose either instruction

Explanation

Signals from a police officer directing traffic take precedence over fixed-time signals and markings. The green light would otherwise authorise movement, but the officer's stop signal suspends that authority. The driver must stop and wait until the officer indicates that movement may resume.

Question 24Traffic signs, signals and road markings

A driver intends to turn right at a junction and sees a green arrow pointing right, but pedestrians are already crossing the road being entered. What is the correct action?

  1. Proceed because the green arrow gives absolute priority
  2. Turn behind the pedestrians without slowing
  3. Sound the horn so the pedestrians hurry
  4. Wait and allow the pedestrians to finish crossing before turning Correct answer.

Explanation

A green arrow permits the movement but does not override the duty to give way to pedestrians already on the crossing. The driver waits until the pedestrians have cleared the path before completing the turn. Signal priority and the duty of care operate together, not against each other.

Question 25Traffic signs, signals and road markings

A driver is in the right-hand lane of a one-way street with three lanes and sees a broken white line to the left. What does correct lane discipline require?

  1. Cross the line only if the lane to the left is empty of parked vehicles
  2. Treat the line as a barrier that may never be crossed
  3. Remain in the lane unless a safe lane change is needed Correct answer.
  4. Change lanes freely to gain a position advantage

Explanation

Lane discipline requires you to stay in your lane and change only when necessary and safe, signalling and checking mirrors and blind spots first. Weaving between lanes to gain advantage increases collision risk and disrupts traffic flow. A broken line may be crossed, but only as part of a deliberate, safe manoeuvre.

Question 26Traffic signs, signals and road markings

A triangular sign bordered in red shows a symbol of two children running. What does this sign warn you about?

  1. A hospital zone where horns are banned
  2. A route reserved for cyclists
  3. A school or playground area where children may cross Correct answer.
  4. A pedestrian zone closed to motor vehicles

Explanation

Red-bordered triangles are warning signs, and the running-children symbol warns of a school, playground or similar place where children may step onto the road. Slow down and be ready to stop. The sign warns of a hazard ahead rather than imposing a prohibition.

Question 27Traffic signs, signals and road markings

You are approaching an intersection and the traffic light changes from green to amber (yellow). What should you do?

  1. Reverse back from the stop line to give way
  2. Continue at the same speed and sound the horn
  3. Accelerate to clear the junction before red appears
  4. Stop if you can do so safely before the stop line Correct answer.

Explanation

Amber means the signal is about to turn red, so you should stop if you can do so safely before the stop line. Only continue if you are so close that stopping suddenly would be dangerous. Accelerating to beat the light is a common cause of collisions.

Question 28Traffic signs, signals and road markings

What do the white zigzag lines painted along the approach to a pedestrian crossing mean?

  1. Overtaking is compulsory on this stretch
  2. Parking is permitted for short stops only
  3. No parking and no overtaking near the crossing Correct answer.
  4. The lane is reserved for two-wheelers

Explanation

Zigzag lines mark the approach to a pedestrian crossing, where parking and overtaking are prohibited so that drivers and pedestrians can see each other clearly. Keep the area clear and approach at a controlled speed. The marking restricts stopping and overtaking rather than permitting anything.

Question 29Traffic signs, signals and road markings

A circular sign with a red border shows the number 40 in black. What does it require?

  1. A recommended speed of 40 km/h
  2. A maximum speed of 40 km/h Correct answer.
  3. The end of a 40 km/h zone
  4. A minimum speed of 40 km/h

Explanation

A red-bordered circle is a prohibition sign, and a number inside it sets the maximum speed permitted, here 40 km/h. You may drive slower if conditions demand it. Minimum speed limits and recommended speeds are shown on blue circular signs.

Question 30Traffic signs, signals and road markings

A driver sees a solid white line on the left edge of the carriageway. What is its purpose?

  1. It marks the edge of the carriageway and the start of the shoulder Correct answer.
  2. It indicates that overtaking is allowed
  3. It shows where parking is permitted
  4. It marks a lane reserved for buses

Explanation

An edge line defines the outer limit of the carriageway, separating the running lane from the shoulder or verge. Crossing it should be avoided except in an emergency. Lane discipline and parking rules are governed by other markings and signs.

Question 31Traffic signs, signals and road markings

A blue circular sign shows a white bicycle. What does this sign mean?

  1. A compulsory track or lane for cyclists only Correct answer.
  2. A cycle repair facility is ahead
  3. Cyclists must give way to motor vehicles
  4. Cyclists are prohibited beyond this point

Explanation

Blue circles give mandatory instructions, and a bicycle symbol means the route or lane is reserved for cyclists. Other vehicles must not use it. The sign creates an obligation rather than a warning or a prohibition for cyclists.

Question 32Traffic signs, signals and road markings

At a roundabout you see a broken white line across your approach lane and a triangle marking on the road. What should you do?

  1. Proceed without looking because you have priority
  2. Sound the horn and enter immediately
  3. Stop completely and wait for a green signal
  4. Give way to traffic already on the roundabout Correct answer.

Explanation

The give-way line and triangle at a roundabout approach require you to yield to traffic already circulating on the roundabout. Enter only when there is a safe gap. Traffic on the roundabout normally has priority over entering traffic.

Question 33Traffic signs, signals and road markings

What does a rectangular sign with a white 'P' on a blue background indicate?

  1. A pedestrian crossing point
  2. A parking area is available Correct answer.
  3. A no-parking zone
  4. A police checkpoint ahead

Explanation

A blue rectangular sign with a white P is an information sign indicating that parking is available. Any restrictions such as time limits are shown on supplementary plates. A prohibition on parking uses a different circular sign with a red border.

Question 34Traffic signs, signals and road markings

You are in the left lane of a three-lane road and see a solid white line separating your lane from the middle lane. What does this mean?

  1. The middle lane is reserved for overtaking only
  2. You must change to the middle lane immediately
  3. You may change lanes freely at any time
  4. Lane changing across the solid line is prohibited Correct answer.

Explanation

A solid white line between lanes travelling in the same direction prohibits crossing it, so you must remain in your lane. Change lanes only where the line becomes broken. This marking protects traffic in the adjacent lane at hazards and junctions.

Question 35Traffic signs, signals and road markings

A driver sees a sign showing a black triangle with a symbol of a car skidding. What does this warn of?

  1. A slippery road surface ahead Correct answer.
  2. A steep uphill gradient
  3. A toll plaza ahead
  4. A vehicle breakdown area

Explanation

The skidding-car symbol in a red-bordered triangle warns of a slippery surface ahead, often caused by rain, ice or spilled material. Reduce speed smoothly and avoid sudden braking or steering. Other hazards have their own distinct symbols.

Question 36Traffic signs, signals and road markings

A sign shows a red circle with a black and white arrow pointing left, with no diagonal bar. What does it require at that junction?

  1. Left turns are allowed only for buses
  2. Turning left is prohibited
  3. You may turn left or go straight
  4. You must turn left Correct answer.

Explanation

A blue circular sign with a white arrow is a mandatory direction sign, but when a red circle contains a black arrow without a bar it still directs compulsory movement at that point. The absence of a diagonal bar distinguishes a mandatory direction from a prohibition. Follow the direction indicated.

Question 37Traffic signs, signals and road markings

You see a yellow-and-black chevron sign on the outside of a sharp bend. What is its purpose?

  1. To guide you around the curve and warn of its severity Correct answer.
  2. To show the end of a speed restriction
  3. To indicate a parking bay
  4. To mark a bus stop on the bend

Explanation

Chevron signs are placed on the outside of bends to show the direction of the curve and warn drivers of its severity. They help you judge the bend, especially at night or in poor visibility. Slow down before reaching the chevrons rather than braking sharply within the curve.

Question 38Traffic signs, signals and road markings

A traffic light shows a single flashing amber light at a junction. What does it mean for a driver?

  1. Only buses may proceed
  2. Stop and wait for a green light
  3. The signals are out of order and the junction is closed
  4. Proceed with caution, giving way as required Correct answer.

Explanation

A flashing amber signal tells drivers to proceed with caution and to apply normal give-way rules, because the junction is not being positively controlled. Look for traffic and pedestrians before entering. It does not mean stop and wait, nor does it close the junction.

Question 39Traffic signs, signals and road markings

What does a double solid yellow line along the centre of the road indicate?

  1. The road is one-way
  2. Overtaking is permitted for cars only
  3. Parking is allowed on both sides
  4. No crossing or overtaking for traffic in either direction Correct answer.

Explanation

Double solid yellow lines prohibit traffic in both directions from crossing the centre to overtake or turn across it. They are used where visibility or road layout makes crossing unsafe. You must stay on your side of the line.

Question 40Traffic signs, signals and road markings

A driver approaches a pedestrian crossing where the light for vehicles is green but a pedestrian has already stepped onto the striped area. What should the driver do?

  1. Sound the horn to warn the pedestrian
  2. Stop and allow the pedestrian to cross Correct answer.
  3. Drive around the pedestrian within the same lane
  4. Continue because the vehicle signal is green

Explanation

Even where a signal favours vehicles, a pedestrian already on the crossing must be allowed to finish crossing safely. The duty to avoid injuring a vulnerable road user overrides the signal advantage. Sounding the horn or steering around the person is dangerous.

Question 41Traffic signs, signals and road markings

A sign shows a red circle containing a black arrow pointing straight ahead with a red diagonal bar across it. What does it mean?

  1. Turn right only
  2. One-way traffic ahead
  3. No entry for vehicles
  4. No straight-ahead movement permitted Correct answer.

Explanation

A red-bordered circle with a diagonal bar is a prohibition sign, so an arrow crossed out forbids movement in that direction. Here it prohibits going straight ahead. No-entry is shown by a red disc with a white horizontal bar.

Question 42Traffic signs, signals and road markings

What does a broken white line in the centre of a two-way road permit?

  1. Crossing to overtake when it is safe and the way is clear Correct answer.
  2. Ignoring the speed limit while overtaking
  3. Driving on the wrong side at all times
  4. Parking on the carriageway at night

Explanation

A broken centre line may be crossed to overtake or turn when it is safe and visibility is adequate. The permission is conditional, so you must still judge gaps and oncoming traffic. It does not relax any other rule such as speed limits or parking restrictions.

Question 43Traffic signs, signals and road markings

A driver sees a sign showing a black triangle with a symbol of a train but no barrier at the crossing. What does this warn of?

  1. A railway station entrance
  2. An unguarded level crossing ahead Correct answer.
  3. A bridge with weight restriction
  4. A tram stop on the road

Explanation

A warning triangle with a train or gate symbol indicates a level crossing ahead, and the absence of a barrier symbol means it is unguarded. Approach slowly, look both ways and be prepared to stop. Guarded crossings use a different symbol.

Question 44Traffic signs, signals and road markings

At a junction the road surface shows a large white arrow pointing left in your lane. What does this tell you?

  1. You must turn left from this lane Correct answer.
  2. You may go straight if no traffic is present
  3. The lane ends immediately
  4. Left turns are optional from this lane

Explanation

Directional arrows painted in a lane prescribe the movement permitted from that lane, so a left-pointing arrow means you must turn left. If you intend to go straight, choose the correct lane earlier. Changing lanes abruptly at the junction is unsafe.

Question 45Traffic signs, signals and road markings

A driver sees a sign with a red border showing a black car above a wavy line representing water. What does it warn of?

  1. A ferry terminal
  2. A car wash facility
  3. A flood relief centre
  4. A ford or water crossing ahead Correct answer.

Explanation

The car-over-water symbol in a warning triangle indicates a ford or place where water may flow across the road. Check the depth and current before proceeding, and never enter fast-flowing or deep water. Facility signs use blue rectangles rather than warning triangles.

Question 46Traffic signs, signals and road markings

A bus lane is marked by a solid line and the word BUS painted on the surface, with restricted hours on a sign. Outside those hours, what generally applies?

  1. Other vehicles may use the lane subject to the sign Correct answer.
  2. The lane becomes a parking bay
  3. Only goods vehicles may use the lane
  4. The lane remains closed to all other vehicles

Explanation

Where a bus lane operates only during stated hours, the restriction applies during those hours and other vehicles may generally use the lane outside them, subject to any sign. Always read the supplementary plate before entering. The lane does not become a parking area.

Question 47Traffic signs, signals and road markings

A driver passes a circular blue sign showing a white arrow curving right, and a second sign below it showing a red bar across a lorry. What is the combined effect?

  1. All vehicles must turn right, and the prohibition applies only to lorries Correct answer.
  2. All vehicles must turn right, and lorries are prohibited from doing so
  3. Lorries must turn right but other vehicles may go straight
  4. The signs cancel each other and no direction is compulsory

Explanation

The blue circular arrow makes a right turn compulsory for traffic, while the supplementary plate with a barred lorry applies that restriction to goods vehicles. Read together, all traffic must turn right and lorries are banned. Supplementary plates qualify the main sign rather than contradict it.

Question 48Traffic signs, signals and road markings

On a road with three lanes in your direction, the rightmost lane is marked by a solid white line on both sides and a bicycle symbol. What does this indicate?

  1. An overtaking lane open to all vehicles
  2. A lane where cyclists must give way to cars
  3. A cycle repair area beside the road
  4. A lane reserved for cyclists that other vehicles must not enter Correct answer.

Explanation

A lane bounded by solid lines and marked with a bicycle symbol is reserved for cyclists, and other vehicles must keep out. The solid boundaries reinforce that the lane may not be crossed. Reserved lanes are not general overtaking lanes.

Question 49Traffic signs, signals and road markings

A driver approaches a signalised junction where the green light is showing but a police officer facing the driver holds an arm raised vertically with the palm forward. What must the driver do?

  1. Slow down and continue while watching the officer
  2. Stop behind the stop line and wait Correct answer.
  3. Reverse away from the junction
  4. Proceed because the green light overrides the officer

Explanation

A police officer's signals take precedence over traffic lights, and a raised arm with the palm forward means stop for traffic approaching from that direction. Remain behind the stop line until the officer signals you to proceed. The green light does not override the officer.

Question 50Traffic signs, signals and road markings

A driver sees a yellow box junction ahead and the exit beyond it is clear, but the light is red. What is the correct action?

  1. Stay behind the stop line until the green light allows you to cross the box completely Correct answer.
  2. Enter the box and wait on it for the green light
  3. Enter the box and stop on the far edge
  4. Enter the box only after the vehicle ahead moves

Explanation

You may enter a yellow box only when the exit is clear and you can clear the box without stopping, and a red signal requires you to wait behind the stop line. Even with a clear exit, entering on red is a signal violation. Wait for green, then cross the box in one movement.