Maharashtra HSC Textiles case studies
Maharashtra HSC Textiles · Put your knowledge to work in context.
The Maharashtra HSC Textiles examination is the Class 12 vocational paper set under the Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE). It is intended for higher secondary students who have chosen the textiles vocational stream, usually alongside a school-conducted practical or internal assessment component. The Maharashtra HSC Textiles case studies are 5 cases and about 3,563 words.
1Blend claim on a mixed warp beam
A weaving co-operative in Ichalkaranji supplies 500 kg of grey fabric to a Pune shirtings buyer. The purchase order states the warp is 60% cotton / 40% polyester.
780 words, about 4 min2Warp breaks after a sizing change at a Bhiwandi powerloom
A powerloom unit in Bhiwandi weaves 40s combed cotton poplin with 6,000 warp ends on a 63-inch reed, running at 600 picks per minute. The quality target is a warp break rate of 1.0 per 10^5 picks; the current rate is 2.5.
668 words, about 3 min3GSM shortfall and spirality in single jersey
A hosiery unit in Malegaon knits 30s combed cotton single jersey on a 24-gauge, 30-inch diameter, 96-feeder machine. The buyer specification is 160 ± 5 GSM, maximum 5% length shrinkage and 5% spirality after three washes at 40 °C.
681 words, about 3 min4Tailing in a deep olive reactive dye lot
A processing house in Solapur dyes 1,200 kg of cotton sheeting in a soft-flow machine at a liquor ratio of 1:6. The approved lab dip is a deep olive shade.
707 words, about 4 min5Shrinkage allowance in a school shirt pattern
A garment unit in Pune has an order for 500 school shirts in five sizes, from 28-inch to 40-inch chest, using 100% cotton poplin of 58-inch width. The existing pattern was graded from an adult 38-inch block with 2-inch chest and 1-inch length increments.
727 words, about 4 min