Maharashtra SSC Hand Embroidery (MSBSHSE) study plan

Identify and label every tool in the embroidery kit (needles by size, hoops, scissors, awl, tracing wheel, embroidery foot) and state the purpose of each in writing

Demonstrate threading, knotting and anchoring a thread with three different anchoring methods and note which fabric each suits

Stitch three rows each of running, back, stem and chain stitch on a single cotton swatch, keeping stitch length even within 2 mm

Match five needle sizes to five fabric weights and justify each pairing in one sentence

Set up a labelled sample book with the first four stitch samples mounted and annotated

Work satin, long-and-short, split, herringbone and blanket stitch samples and record the thread count used for each

Practise French knots and bullion knots until ten consecutive knots sit uniform in size and tension

Compare two hoop types and two fabric tension levels, then record which gives the flattest satin stitch

Execute a 5 cm circle in satin stitch with edges that do not pucker or gap

Photograph each new sample flat and paste it into the sample book with the stitch name and direction of work

Draw five motif outlines (floral, paisley, geometric, leaf, bird) that can be worked entirely in outline stitches

Apply the principles of balance, rhythm and repetition by reworking one motif into three layout variations on paper

Build a 12-step colour wheel and label primary, secondary and tertiary hues

Select three colour schemes (analogous, complementary, monochromatic) and colour the same motif in each

Translate one coloured motif into a stitch plan naming the stitch for each area

Prepare four fabric types (cotton, silk, linen, blended) by pre-washing, drying and pressing, and log shrinkage observed

Test three tracing methods (carbon paper, prick-and-pounce, backlight) on light and dark fabrics and rate legibility

Transfer one motif onto each prepared fabric using the best method for that fabric

Identify grain line, selvedge and bias on each sample and explain why motif placement follows grain

Mount the four traced samples with method notes and shrinkage figures

Describe the defining stitch vocabulary and motif grammar of Kutch, Chikankari, Kantha, Phulkari and Kasuti in written notes of 60 words each

Identify the distinguishing features of Maharashtra traditions such as Warli-inspired figurative work and Paithani-style motifs, and sketch one example of each

Work a 10 cm Kantha-style running-stitch panel and a 10 cm Kasuti-style geometric motif

Add three surface embellishments (sequins, beadwork, mirror or shisha work) to a stitched sample and note the anchoring technique for each

Compile a comparison table of the five styles covering region, base fabric, dominant stitches and colour palette

Apply zardosi-type raised work using a hook or curved needle over a padded base and document the padding method

Finish one embroidered article completely: trim, block, line or back the reverse side, and press without flattening the stitches

Write a care label for the finished article covering wash temperature, drying position, ironing from the reverse and storage

Test stain removal on a scrap sample with two mild agents and record which is safe for the dyed threads

Compare blocked versus unblocked samples and note the difference in appearance

Cost one article fully, listing material consumption, thread and needle wastage, hours worked and a labour rate

Calculate a selling price using a chosen profit margin and break-even quantity, showing the arithmetic

Draft a simple project timeline for a 30 cm embroidered panel from design to finishing with day-wise targets

List eight occupational safety practices covering needle handling, posture, lighting, eye rest and ventilation, and set up the workstation accordingly

Prepare a one-page portfolio sheet with photograph, materials, hours and price for the finished article

Complete a timed mock test of 60 questions across all nine domains and score it yourself against the syllabus

Re-work the three weakest stitch samples identified from the mock test and re-photograph them

Assemble the full sample book with index, page numbers and a contents list

Execute a final 20 cm project combining at least four stitches and one embellishment, finished and pressed to exhibition standard

Rehearse a two-minute spoken explanation of the project covering design source, stitches, costing and care