Maharashtra SSC Automotive Service Technician Pre-Voc/NSQF study guide
Maharashtra SSC Automotive Service Technician Pre-Voc/NSQF · Work through your exam, one topic at a time.
The Maharashtra SSC Automotive Service Technician course is a vocational/NSQF subject offered within the State Board's Secondary School Certificate stream, delivered through schools and vocational institutions approved by MSBSHSE. It suits students who want a Class 10 credential with a practical trade skill attached, and it also serves as an entry point into the automobile service industry or into further technical study such as ITI Motor Mechanic or diploma programmes. The Maharashtra SSC Automotive Service Technician Pre-Voc/NSQF study guide has 10 sections and about 3,027 words.
01Occupational Safety, Health and Environment
The exam tests safe behaviour in a two-wheeler and car workshop: hazard recognition, PPE selection, fire response, chemical handling and environmental duty. In India, the Factories Act 1948 and state shop-and-establishment rules make the employer responsible for guarding machinery, ventilation and first aid, but the technician must still follow the job card and safe system of work.
352 words, about 2 min02Automotive Tools, Measuring Instruments and Workshop Practice
The exam checks whether you can select, use and care for workshop equipment. Common measuring tools are the steel rule, vernier caliper, micrometer, dial indicator, bore gauge, feeler gauge, plastigauge and torque wrench.
327 words, about 2 min03Automotive Engine Systems and Overhauling
This domain tests four-stroke operation, valve timing, compression, lubrication, cooling and overhaul procedure. Know the sequence: intake, compression, power, exhaust.
318 words, about 2 min04Transmission, Clutch, Gearbox and Differential
The exam covers power flow from clutch to gearbox, propeller shaft, differential and drive shafts. A clutch must have correct free play and release smoothly; a hydraulic clutch needs clean fluid and proper bleeding.
303 words, about 2 min05Braking, Steering and Suspension Systems
The exam tests hydraulic braking, ABS, parking brakes, steering geometry and suspension inspection. Brake fluid is hygroscopic; use the specified DOT fluid and never mix DOT 4 with silicone DOT 5.
312 words, about 2 min06Automotive Electrical and Electronic Systems
The exam covers Ohm’s law, series and parallel circuits, battery, starting, charging, lighting, sensors, ECU and CAN bus. A fully charged lead-acid cell has a specific gravity near 1.260; 1.120 indicates a low state of charge.
298 words, about 1 min07Fuel, Emission Control and Alternative Fuel Systems
This domain tests petrol and diesel fuel systems, emission controls and alternative fuels. Petrol engines use port or direct injection; diesel uses high-pressure common rail or pump systems.
301 words, about 2 min08Vehicle Body, Paint, Trim and Welding Basics
The exam covers body panels, panel beating, fillers, primers, topcoats, clear coats, trim fasteners, glass and basic welding. Prepare metal by cleaning, straightening and applying primer; body filler is for minor imperfections, not structural repair.
289 words, about 1 min09Vehicle Diagnosis, Servicing and Preventive Maintenance
The exam tests structured diagnosis, periodic service and preventive maintenance. Use the five-step method: verify the complaint, gather information, test, repair, and confirm.
257 words, about 1 min10Employability Skills, Entrepreneurship and Customer Service
This domain tests communication, teamwork, interview readiness, customer handling and basic business sense. A technician must explain a fault in plain language, give an estimate before work, record approval and hand over the invoice with old parts if asked.
270 words, about 1 min