Iraq Heavy Vehicle Driving Theory study materials
Iraq Heavy Vehicle Driving Theory study resources

Iraq Heavy Vehicle Driving Theory case studies

Iraq Heavy Vehicle Driving Theory · Put your knowledge to work in context.

The Iraq Heavy Vehicle Driving Theory Exam is the knowledge test that candidates must pass to obtain a heavy vehicle driving licence in Iraq, typically for categories C (goods vehicles) and D (passenger vehicles). It is intended for drivers who already hold a light vehicle licence and want to upgrade, as well as for professional drivers seeking formal authorisation. The Iraq Heavy Vehicle Driving Theory case studies are 5 cases and about 2,999 words.

1

Overloaded steel coils at the checkpoint

At 06:40 a driver leaves Umm Qasr with a three-axle tractor and three-axle flatbed trailer carrying six steel coils, each weighing 5.2 t. The weighbridge ticket shows gross 53,600 kg against a permitted gross of 48,000 kg.

609 words, about 3 min
2

Air pressure falls on a mountain descent

At 14:20 a 32 t loaded tipper begins an 8 km descent on a 6% grade in northern Iraq. Ambient temperature is 42°C.

574 words, about 3 min
3

Deadline pressure after 9.5 hours of driving

A refrigerated truck driver started at 05:00 in Baghdad for a 520 km run to Basra. At 19:30 he has driven 9 h 35 min and been on duty 13 h 10 min, including two 20-minute stops.

593 words, about 3 min
4

Night collision with an unconscious motorcyclist

At 23:10 a driver of a 26 t rigid truck carrying bagged cement is travelling at 60 km/h on an unlit two-lane road. A motorcyclist crosses from a side track and is struck.

597 words, about 3 min
5

Pre-trip defects against a dispatch deadline

At 05:10 in summer, a driver begins a pre-trip inspection of a 6x4 rigid truck loaded to 24 t for a 600 km run. He finds: a 5 cm sidewall bulge and 2.8 mm tread on the front-left steer tyre; with the engine running, air pressure builds from 0 to 6.8 bar in 6 minutes; with the engine off it falls from 6.8 to 5.6 bar in 5 minutes; the drive-axle brake pushrod stroke is 58 mm against a manufacturer limit of 45 mm; coolant is at the minimum mark; the reverse light is out; the wiper blade is torn.

626 words, about 3 min