ISO 45001 LA case studies
ISO 45001 LA · Put your knowledge to work in context.
The PECB Certified ISO 45001 Lead Auditor credential targets professionals who plan, lead, and report on occupational health and safety management system (OH&S MS) audits against ISO 45001 - described by PECB as the first global OH&S MS standard, replacing OHSAS 18001. The training course develops the skillset needed to audit an OH&S MS using widely recognized audit principles, procedures, and methods, aligned with the auditing guidelines in ISO 19011 and the certification process in ISO/IEC 17021-1. The ISO 45001 LA case studies are 5 cases and about 4,244 words.
1The Laser Cell Nobody Reviewed
Northfield Fabrication commissioned a 6 kW fibre laser cutting cell over a single weekend in March. The production manager signed a commissioning checklist covering electrical isolation and cut-quality trials; the OH&S manager first heard about the installation at the following Monday's operations meeting.
955 words, about 5 min2Two Versions of the Near-Miss Story
You are auditing a 24/7 distribution centre with 210 workers and roughly 180 forklift movements per shift. In a pedestrian walkway an operative tells you, unprompted, that nobody reports near misses any more because shift supervisors say it costs time and the numbers get used against them.
832 words, about 4 min3Scope, Sample and Deadline Pressure
You are lead auditor planning a stage 2 certification audit for Kestrel Build, a contractor with a head office, two directly managed projects and one joint-venture project where the JV partner holds the principal contractor duty. The client's proposed scope reads: 'Construction of commercial buildings in the northern region'.
850 words, about 4 min4Closing the Major Nobody Closed
Two weeks after the closing meeting of a surveillance audit, the client submits a corrective action plan for the single major nonconformity: contractor pre-qualification was not completed for six of the nine contractors working on site, with no evidence of review of their OH&S arrangements before mobilisation (8.1.4). The plan states: root cause - contractor supervisors were not aware of the site rules; correction - the six contractors were pre-qualified retrospectively on 3 March; corrective action - a toolbox talk, with an attendance sheet signed 12 February, before the audit took place; evidence enclosed - the attendance sheet and the six new pre-qualification forms.
788 words, about 4 min5A Programme Under Pressure
You manage the ISO 45001 certification programme for a client holding one certificate covering 14 sites, audited on a rolling multi-site sample. In the last six months: a subcontracted worker died after a fall from height at one site; two internal audits across the sample found the same nonconformity against 9.1.2, where compliance evaluation had not been updated after a legislative change; the auditor who covers the two highest-risk sites has left for another certification body; and the client has acquired three new sites to be added before the next surveillance.
819 words, about 4 min