I85PREP
⌘ K
NaTIS Code 2 Learner study materials
NaTIS Code 2 Learner study resources

NaTIS Code 2 Learner practice questions

One question at a time. Build your NaTIS Code 2 Learner understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road signs, signals and road markings

What does a circular road sign with a red border and a white centre generally indicate in NaTIS road signage?

  1. A compulsory direction that must be followed
  2. A general information point for tourists
  3. A prohibition or restriction that drivers must obey Correct answer.
  4. A warning of a hazard ahead on the road

Explanation

Circular signs with a red border belong to the regulatory family and impose a prohibition or restriction, such as a speed limit or a no-entry rule. The red ring signals that the instruction is mandatory and enforceable. Warning signs use a different shape, so a red circle should never be read as an advance hazard warning.

Question 2Road signs, signals and road markings

A triangular sign with a red border and a black symbol inside is used on South African roads to convey which type of message?

  1. A parking permission for a specific period
  2. A legal maximum speed for the section
  3. A route number for a national road
  4. A warning about a hazard or road condition ahead Correct answer.

Explanation

Triangular signs with a red border are warning signs; they alert the driver to a hazard or change in road conditions ahead so speed and attention can be adjusted. The symbol inside identifies the specific hazard, such as a curve, junction or slippery surface. They do not impose a numerical limit or grant permission.

Question 3Road signs, signals and road markings

What is the meaning of a solid white line painted along the centre of a two-way road?

  1. Overtaking is permitted when the road is clear
  2. The lane may be used for parking during peak hours
  3. Overtaking across the line is prohibited Correct answer.
  4. The line marks the edge of the roadway only

Explanation

A solid (unbroken) centre line tells drivers that they may not cross it to overtake or change lanes. It is normally used where visibility or road geometry makes overtaking unsafe. A broken line, by contrast, permits crossing when it is safe to do so.

Question 4Road signs, signals and road markings

A traffic light showing a steady red circle means the driver must do which of the following?

  1. Stop before the stop line and wait for a green signal Correct answer.
  2. Yield only to pedestrians already crossing
  3. Stop only if another vehicle is approaching
  4. Slow down and proceed if the intersection is clear

Explanation

A steady red circle is a mandatory stop instruction; the vehicle must halt before the stop line or crossing point and remain stationary until a green signal appears. Proceeding on red is an offence unless a traffic officer directs otherwise. Clearing the intersection on red is not permitted simply because it looks empty.

Question 5Road signs, signals and road markings

What does a flashing red traffic signal at an intersection require a driver to do?

  1. Stop and proceed only when it is safe Correct answer.
  2. Wait for a green arrow before moving at all
  3. Treat the intersection as permanently closed
  4. Proceed without stopping at normal speed

Explanation

A flashing red signal functions like a stop sign: the driver must come to a complete stop and then proceed only when the way is clear and safe. It does not close the intersection, nor does it require waiting indefinitely for a green light. The obligation to stop fully is the key point.

Question 6Road signs, signals and road markings

A driver approaches an intersection where the traffic light shows a flashing amber (yellow) signal. What is the correct action?

  1. Proceed with caution, giving way as required Correct answer.
  2. Stop completely and wait for green
  3. Reverse away from the intersection
  4. Accelerate to clear the junction quickly

Explanation

A flashing amber signal warns that the signal is not controlling right of way in the normal way, so the driver must proceed cautiously and apply the applicable give-way rules. It does not require a full stop like a flashing red. Speeding up to clear the junction increases risk and is not the intended response.

Question 7Road signs, signals and road markings

A blue circular sign containing a white arrow pointing straight ahead indicates what?

  1. A prohibition on proceeding straight
  2. A compulsory direction of travel Correct answer.
  3. A warning of a one-way street ending
  4. A suggested but optional route

Explanation

Blue circular signs give mandatory instructions, and a white arrow inside one directs traffic to proceed in the direction shown. Compliance is compulsory, not advisory. A prohibition would be shown with a red border instead of blue.

Question 8Road signs, signals and road markings

What is indicated by a yellow diamond-shaped sign on a South African road?

  1. A warning of a hazard requiring reduced speed Correct answer.
  2. A compulsory stop ahead
  3. A recommended scenic route
  4. A parking restriction zone

Explanation

Yellow diamond signs are warning signs used to alert drivers to hazards ahead so they can adjust speed and be prepared. The symbol inside identifies the specific hazard. They do not impose a stop obligation, which is shown by a red octagon.

Question 9Road signs, signals and road markings

A red octagonal sign with the word STOP requires the driver to halt at which point?

  1. Only when another vehicle is visible
  2. At the stop line, or at the edge of the intersection if no line is painted Correct answer.
  3. Anywhere within ten metres after the sign
  4. At the centre of the intersection

Explanation

The stop sign requires a complete halt at the marked stop line; where no line exists, the driver stops at the edge of the roadway or intersection so as to have a clear view. Stopping beyond the line or in the middle of the junction defeats the purpose and is unsafe.

Question 10Road signs, signals and road markings

When approaching a yield (give way) sign at a junction, the driver must do which of the following?

  1. Proceed without slowing if no sign of traffic
  2. Come to a complete stop in every case
  3. Sound the horn before entering the junction
  4. Slow down and give way to traffic on the priority road Correct answer.

Explanation

A yield sign obliges the driver to slow down and give way to traffic already on the priority road, proceeding only when it is safe. A complete stop is required only if necessary to give way, not in every case. The driver must still be prepared to stop.

Question 11Road signs, signals and road markings

What does a broken white line between two lanes travelling in the same direction permit?

  1. Driving in either direction in that lane
  2. Parking in the lane during off-peak hours
  3. Changing lanes when it is safe to do so Correct answer.
  4. Overtaking only heavy vehicles

Explanation

A broken (dashed) line separating lanes in the same direction may be crossed when it is safe to change lanes. It does not create a two-way lane or grant parking rights. The manoeuvre must still be signalled and safe.

Question 12Road signs, signals and road markings

A driver sees a painted yellow line along the edge of the roadway. What does this marking normally indicate?

  1. A lane reserved for overtaking
  2. The centre of a two-way road
  3. Restrictions on stopping or parking along that edge Correct answer.
  4. A pedestrian crossing point

Explanation

Yellow edge markings are used to indicate restrictions on stopping or parking along the side of the road. They are regulatory markings and drivers must not stop where the restriction applies. They do not reserve a lane or mark a crossing.

Question 13Road signs, signals and road markings

What does a sign showing a red circle with a white horizontal bar across it mean?

  1. Stop and yield to traffic
  2. One-way traffic begins here
  3. No entry for vehicular traffic Correct answer.
  4. End of all restrictions

Explanation

A red circle with a white horizontal bar is the no-entry sign, meaning vehicles may not enter that road or lane. It is commonly placed at the exit of a one-way street to prevent wrong-way entry. It is not a stop or yield instruction.

Question 14Road signs, signals and road markings

A circular sign showing a red border with the number 60 in the centre means which of the following?

  1. The road number is 60
  2. The maximum speed permitted is 60 km/h Correct answer.
  3. The distance to the next town is 60 km
  4. The minimum speed permitted is 60 km/h

Explanation

A red-bordered circle with a number gives the maximum legal speed in kilometres per hour for that section of road. Exceeding it is an offence. Minimum speed limits and route numbers use different sign formats.

Question 15Road signs, signals and road markings

A driver passes a sign showing a red circle with a black car and a red diagonal line through it. What does this prohibit?

  1. Entry by animal-drawn vehicles
  2. Entry by motor vehicles Correct answer.
  3. Entry by cyclists
  4. Entry by pedestrians

Explanation

A red-bordered circle with a motor vehicle symbol crossed by a red diagonal line prohibits the entry of motor vehicles. The symbol inside identifies the class of road user affected. Similar signs with different symbols restrict other classes.

Question 16Road signs, signals and road markings

What must a driver do when approaching a pedestrian crossing marked with broad white stripes where a pedestrian is waiting to cross?

  1. Maintain speed because pedestrians must wait for vehicles
  2. Slow down and stop to allow the pedestrian to cross Correct answer.
  3. Pass the pedestrian on the left without stopping
  4. Sound the horn to warn the pedestrian to remain on the pavement

Explanation

At a marked pedestrian crossing the driver must slow down and give way to pedestrians crossing or about to cross. The pedestrian has priority at such crossings. Sounding a horn or passing without stopping endangers the pedestrian and is an offence.

Question 17Road signs, signals and road markings

A traffic light displays a green arrow pointing left while the main circle remains red. What does this permit?

  1. Turning right across oncoming traffic
  2. Turning left only, after giving way where required Correct answer.
  3. Proceeding in any direction
  4. Proceeding straight through the intersection

Explanation

A green arrow authorises movement only in the direction the arrow points, so in this case a left turn. The red main circle still prohibits other movements. The driver must also give way to pedestrians and traffic as applicable when turning.

Question 18Road signs, signals and road markings

What is the meaning of a red circle containing a black 'P' with a diagonal line through it?

  1. Parking is permitted for a limited time
  2. Parking is reserved for permit holders
  3. Parking is free of charge here
  4. No parking is permitted at that location Correct answer.

Explanation

A red-bordered circle with a crossed-out 'P' is the regulatory sign for no parking. Drivers may not leave a vehicle parked there at any time. Parking permission signs use a plain 'P' without a diagonal line.

Question 19Road signs, signals and road markings

A driver is on a road with a solid white line on the left edge and a broken white centre line, approaching a curve. Which statement best describes the correct use of these markings?

  1. Both lines may be crossed freely to use the full road width
  2. The edge line marks the roadway boundary while the broken centre line may be crossed to overtake when safe Correct answer.
  3. The broken line marks the edge while the solid line marks the centre
  4. Neither line may be crossed under any circumstances

Explanation

Edge lines define the boundary of the roadway, while a broken centre line may be crossed to overtake or change lanes when it is safe. The two markings serve different purposes and should not be confused. A broken line is permissive but never obliges a driver to overtake.

Question 20Road signs, signals and road markings

A driver enters a road marked with a large white arrow painted on the surface pointing to the right, in a lane that also has a solid white line on its right side. What is the correct interpretation?

  1. The lane permits straight travel only, and the solid line may be crossed at will
  2. The arrow is advisory and the solid line marks a parking bay
  3. The lane is for oncoming traffic and the arrow warns of a hazard
  4. The lane directs traffic to turn right, and the solid line means the lane may not be left late Correct answer.

Explanation

A painted directional arrow indicates the movement for which the lane is intended, and a solid line alongside it means the lane should not be changed out of at the last moment. Together they channel traffic into the correct approach. Ignoring the arrow risks a late, unsafe manoeuvre.

Question 21Road signs, signals and road markings

A school bus has stopped ahead with its red warning lights flashing and children are crossing. What must the driver do?

  1. Sound the horn to warn the children to hurry
  2. Slow down and pass carefully on the left
  3. Flash headlights and continue at the same speed
  4. Stop and remain stopped until the children are clear and the lights stop flashing Correct answer.

Explanation

Flashing red lights on a school bus warn that children are getting on or off. Drivers approaching from either direction must stop and stay stopped until the children are safely clear and the lights stop flashing. Passing a bus with active red lights endangers children and is an offence.

Question 22Road signs, signals and road markings

An amber (yellow) traffic light appears as a driver approaches and the vehicle cannot stop safely before the line. What is the correct action?

  1. Reverse back behind the stop line
  2. Proceed through the intersection with caution Correct answer.
  3. Brake hard regardless of following traffic
  4. Stop in the middle of the intersection and wait

Explanation

A steady amber light warns that red is about to follow and requires a stop if it can be made safely. If the vehicle is too close to stop safely, the driver should proceed through with caution and clear the junction. Stopping in the middle of the intersection blocks crossing traffic.

Question 23Road signs, signals and road markings

What does a rectangular blue sign showing a white bicycle symbol indicate?

  1. A prohibition on cycling
  2. A route or lane designated for cyclists Correct answer.
  3. A warning of cyclists crossing ahead only
  4. A bicycle repair facility

Explanation

A blue rectangular sign with a bicycle symbol designates a route or lane for cyclists, informing drivers that cyclists are expected there. Blue signs generally convey information or compulsion rather than prohibition. A prohibition would use a red border with a diagonal line.

Question 24Road signs, signals and road markings

A driver approaches a railway level crossing with a sign showing a steam train symbol inside a red triangle, and no barriers are visible. What is the required approach?

  1. Sound the horn continuously while crossing
  2. Stop for exactly three seconds and then proceed
  3. Slow down, look and listen, and cross only when no train is approaching Correct answer.
  4. Maintain speed because trains must yield to road traffic

Explanation

The triangular train symbol warns of an unguarded level crossing ahead. The driver must slow down, look and listen in both directions, and cross only when it is clear that no train is approaching. Trains cannot stop quickly, so road traffic must always give way.

Question 25Road signs, signals and road markings

What is the purpose of a painted white chevron area (a large white arrow or hatched marking) on the road surface at a junction?

  1. To indicate a toll collection point
  2. To provide a stopping area for emergency vehicles
  3. To mark a pedestrian refuge in all cases
  4. To guide traffic into the correct lane and separate conflicting movements Correct answer.

Explanation

Chevron and hatched markings channel traffic, guide drivers into the correct lane and separate conflicting streams at junctions. Drivers should follow the direction indicated rather than driving over the hatched area. They are not stopping bays or toll markers.

Question 26Road signs, signals and road markings

A driver approaches a set of traffic lights showing a steady red circle together with a steady green arrow pointing right. What does this signal allow the driver to do?

  1. Wait until the red circle changes to green before moving in any direction
  2. Reverse out of the lane and take another route
  3. Proceed only in the direction of the arrow, after yielding to traffic already in the intersection Correct answer.
  4. Proceed straight ahead or turn right without yielding to anyone

Explanation

A green arrow authorises movement only in the direction the arrow points, even while the main circle stays red. Any traffic already lawfully in the intersection or conflicting with that movement must still be given way to. The straight-ahead movement remains prohibited until the main circle turns green.

Question 27Road signs, signals and road markings

What does a circular sign with a red border and a black diagonal line running across a blue background indicate?

  1. The end of a restriction that was previously indicated by a blue sign Correct answer.
  2. A warning of roadworks ahead
  3. A compulsory direction of travel for all vehicles
  4. A parking area reserved for permit holders

Explanation

A blue circular sign imposes a mandatory instruction or restriction, and adding a red diagonal line cancels it. The sign therefore marks the point where the earlier restriction stops applying. Drivers may resume normal conduct from that point onward.

Question 28Road signs, signals and road markings

A driver sees a triangular warning sign containing a symbol of two children running. What hazard does this sign warn of?

  1. A pedestrian crossing controlled by traffic lights
  2. A hospital zone where hooting is prohibited
  3. A bus stop where passengers board from the roadway
  4. A school or play area where children may cross unexpectedly Correct answer.

Explanation

Triangular signs with a red border are warnings, and the children symbol warns that a school, playground or similar area lies ahead. Children may enter the road without warning, so speed should be reduced and the driver should be ready to stop.

Question 29Road signs, signals and road markings

On a two-way road, what does a solid white line painted along the centre of the roadway mean for a driver?

  1. No crossing or straddling of the line to overtake Correct answer.
  2. Overtaking is permitted whenever the road ahead is clear
  3. The line marks the edge of a bus lane
  4. The lane may be used for parking during off-peak hours

Explanation

A solid centre line prohibits crossing or straddling it, which means overtaking that requires moving into the opposing lane is not allowed. The restriction applies regardless of how clear the road appears ahead. Broken lines, by contrast, may be crossed when it is safe.

Question 30Road signs, signals and road markings

A driver encounters a stop sign at a four-way intersection where no other vehicle is visible. What is required?

  1. Come to a complete stop at the stop line before proceeding Correct answer.
  2. Sound a warning and drive through without stopping
  3. Stop only if another vehicle is approaching
  4. Slow down and continue if the way appears clear

Explanation

A stop sign requires a complete halt at the stop line, or at the edge of the intersection if there is no line, every time. The obligation does not depend on whether other traffic is present. The driver may proceed only after stopping and confirming the way is clear.

Question 31Road signs, signals and road markings

A traffic light shows a steady red circle with no arrows. A driver wishes to turn left into a one-way street. What does the red signal require?

  1. Proceed if no pedestrians are on the crossing
  2. Stop and remain stationary until a green signal appears Correct answer.
  3. Turn left after slowing down, since left turns are always allowed on red
  4. Treat the red light as a yield sign

Explanation

A steady red circle means all vehicles must stop at the stop line and stay there until a green signal is shown. There is no general permission to turn left on red in South African traffic law. The driver must wait for the light to change.

Question 32Road signs, signals and road markings

What does a rectangular sign with a white background showing a black 'P' and the word 'PAY' beneath it indicate?

  1. Parking is free for a limited period
  2. Parking is prohibited at all times
  3. Parking is permitted only on payment of the displayed fee Correct answer.
  4. Parking is reserved for delivery vehicles

Explanation

The letter 'P' indicates a parking area, and the word 'PAY' shows that a fee applies. The driver must pay according to the posted conditions before leaving the vehicle. Free or prohibited parking would be shown by different wording or by a red diagonal line.

Question 33Road signs, signals and road markings

A driver sees a painted white diamond symbol on the road surface in the lane ahead. What does this marking indicate?

  1. A railway crossing is ahead
  2. A pedestrian crossing is approaching in that lane Correct answer.
  3. The lane is reserved for high-occupancy vehicles
  4. A toll plaza lies ahead

Explanation

The white diamond painted on the road surface warns that a pedestrian crossing lies ahead in that lane. Drivers should reduce speed and prepare to stop for pedestrians. The marking supplements the crossing sign and the painted stripes themselves.

Question 34Road signs, signals and road markings

What is the meaning of a circular sign with a blue background showing a white arrow curving to the left?

  1. A left turn is prohibited at the junction
  2. The road curves left and overtaking is banned
  3. A left-hand drive vehicle lane begins here
  4. Vehicles must keep to the left of the obstruction or follow the indicated path Correct answer.

Explanation

Blue circular signs give mandatory instructions, and an arrow directs traffic to follow the path shown. The sign therefore requires vehicles to pass on the indicated side or follow the indicated direction. It is not a warning but a compulsory direction.

Question 35Road signs, signals and road markings

A driver approaches a junction controlled by a flashing red signal. What must the driver do?

  1. Treat the signal as a green light and proceed freely
  2. Stop completely, then proceed only when it is safe Correct answer.
  3. Continue at the same speed because the signal is not working
  4. Wait for a green light before moving in any direction

Explanation

A flashing red signal operates like a stop sign: the driver must come to a full stop and then proceed only when the way is clear. It does not mean the signal is ignored or that a green light will follow immediately. Caution and giving way to cross traffic are essential.

Question 36Road signs, signals and road markings

What does a broken yellow line painted along the edge of the roadway indicate?

  1. Stopping and parking are prohibited except for brief loading Correct answer.
  2. The road edge is unsafe and must not be approached
  3. The lane is reserved for buses only
  4. Parking is permitted at any time

Explanation

A yellow line at the edge of the carriageway restricts stopping and parking, and a broken yellow line generally permits only short stops such as loading or dropping off passengers. A solid yellow line imposes a stricter prohibition. Drivers should check nearby signs for the exact conditions.

Question 37Road signs, signals and road markings

A triangular warning sign shows a symbol of a car skidding with wavy tyre tracks. What should the driver do?

  1. Increase speed to maintain momentum through the hazard
  2. Reduce speed because the road surface ahead may be slippery Correct answer.
  3. Switch on hazard lights and stop in the lane
  4. Change lanes immediately without checking mirrors

Explanation

The skidding-car symbol warns of a slippery or uneven surface ahead, such as gravel, water or a sharp bend. The correct response is to slow down before reaching the hazard and avoid sudden braking or steering. Smooth, gentle inputs reduce the risk of losing control.

Question 38Road signs, signals and road markings

What is indicated by a sign showing a white arrow pointing down on a blue rectangular background, mounted above a lane?

  1. The lane is closed and must be vacated
  2. The lane is reserved for emergency vehicles
  3. Traffic in that lane may proceed in the direction shown Correct answer.
  4. Traffic in that lane must turn back

Explanation

Lane-control signs above the roadway use a downward arrow to confirm that the lane is open and traffic may use it. A red cross in the same position would mean the lane is closed. Drivers should follow the indication for their lane.

Question 39Road signs, signals and road markings

A driver approaches a pedestrian crossing where a uniformed traffic officer stands with an arm raised vertically and the palm facing traffic. What must the driver do?

  1. Stop only if pedestrians are present
  2. Proceed slowly around the officer
  3. Stop and wait until the officer signals otherwise Correct answer.
  4. Sound a warning and continue

Explanation

A raised arm with the palm facing oncoming traffic is a signal for those vehicles to stop. The officer's signals take precedence over the traffic lights and signs at the crossing. The driver must remain stopped until the officer indicates that traffic may proceed.

Question 40Road signs, signals and road markings

What does a circular sign with a red border containing the symbol of a bicycle mean?

  1. Cycles are prohibited from proceeding beyond the sign Correct answer.
  2. A bicycle shop is located nearby
  3. A cycle lane begins at the sign
  4. Cyclists have priority over motor vehicles here

Explanation

A red circle imposes a prohibition, so a bicycle inside it bans cyclists from continuing past that point. The restriction may apply to a particular road or section. A blue circle with a bicycle would instead indicate a route or lane for cyclists.

Question 41Road signs, signals and road markings

A driver is travelling in the left lane of a dual-carriageway and sees a solid white line separating the left lane from the right lane. What does this mean?

  1. The driver must move into the right lane immediately
  2. The left lane is closed ahead
  3. The driver may not cross into the right lane at that point Correct answer.
  4. The driver may cross whenever traffic is light

Explanation

A solid white line between lanes may not be crossed or straddled, so a lane change at that point is prohibited. Drivers must remain in their lane until the line becomes broken or the restriction ends. This protects traffic moving at different speeds.

Question 42Road signs, signals and road markings

What does a rectangular green sign with white lettering showing a place name and a distance in kilometres indicate?

  1. A speed limit for the next section
  2. The start of a toll road
  3. Direction and distance to a destination along the route Correct answer.
  4. A warning of a hazard at that distance

Explanation

Green rectangular signs with white lettering give directional information, naming destinations and the distance to them. They help drivers plan their route rather than imposing a rule. Warning and regulatory signs use different shapes and colours.

Question 43Road signs, signals and road markings

A driver sees a triangular sign showing a symbol of a train inside a red border, with a barrier ahead. What does this warn of and what should the driver do?

  1. A railway museum ahead; reduce speed only at night
  2. A level crossing with barriers ahead; approach with caution and be ready to stop Correct answer.
  3. A station where passengers may cross; sound a warning and continue
  4. A tram line that always has priority; accelerate across

Explanation

The steam-train symbol in a red triangle warns of a railway level crossing ahead. The driver should slow down, look and listen for trains, and be prepared to stop if the barriers are down or a train is approaching. Never attempt to cross once the signals operate.

Question 44Road signs, signals and road markings

What does a circular sign with a red border containing a black arrow pointing straight ahead and a red diagonal line across the arrow mean?

  1. One-way traffic straight ahead
  2. Road narrows ahead
  3. Compulsory route straight ahead
  4. No entry for vehicles proceeding straight ahead Correct answer.

Explanation

A red diagonal line across a symbol cancels the movement shown, so the arrow with a line through it prohibits continuing straight ahead. Drivers must choose another direction permitted at that point. A blue circle with a plain arrow would instead compel the direction shown.

Question 45Road signs, signals and road markings

A driver approaches a set of traffic lights showing a steady green circle, but the intersection ahead is blocked by queuing traffic. What should the driver do?

  1. Drive onto the pavement to pass the queue
  2. Sound a warning until the queue moves
  3. Enter the intersection and wait in the middle of it
  4. Stay behind the stop line until there is room to clear the intersection Correct answer.

Explanation

A green light permits movement only if the driver can clear the intersection; entering a blocked junction would obstruct cross traffic when the lights change. The driver should wait behind the stop line until space is available. Blocking the box junction is an offence and creates gridlock.

Question 46Road signs, signals and road markings

A road has a painted hatched area bordered by solid white lines in the middle of the carriageway. How should a driver treat it?

  1. Treat the hatched area as an extra lane during peak hours
  2. Use the hatched area for overtaking when traffic is light
  3. Keep out of the hatched area and remain within the marked lane Correct answer.
  4. Stop in the hatched area to take a phone call

Explanation

A hatched area bounded by solid white lines is a prohibited zone that separates or protects traffic streams. Drivers must not enter it except in an emergency. It is not an additional lane, even when traffic is congested.

Question 47Road signs, signals and road markings

A driver approaches a junction where a circular sign shows a red border with a black arrow bending to the right and a diagonal red line across it, and the driver intends to turn right. What is the effect?

  1. The right turn is compulsory
  2. The right turn is permitted after stopping
  3. The right turn is prohibited and another route must be used Correct answer.
  4. The right turn is permitted only for buses

Explanation

A red diagonal line through a directional arrow cancels that movement, so turning right at that junction is prohibited. The driver must continue in a permitted direction and find another route. The sign does not require a stop or grant permission to turn.

Question 48Road signs, signals and road markings

A driver passes a sign showing a red circle with the number 80 and then, a short distance later, a rectangular white sign with the word 'END' and the number 80 crossed out. What is the position?

  1. The speed limit remains 80 km/h until the next town
  2. The speed limit rises to 120 km/h immediately
  3. The driver must reduce speed to 60 km/h
  4. The 80 km/h restriction has ended and the general limit for that road applies Correct answer.

Explanation

A restriction sign imposes a limit from the point where it is placed, and the 'END' sign cancels it from that point onward. After the cancellation the general speed limit for that class of road applies. No new specific limit is created by the cancellation itself.

Question 49Road signs, signals and road markings

A traffic light shows a steady amber (yellow) signal as a driver approaches, and the driver is too close to stop safely. What is the correct action?

  1. Reverse back behind the stop line
  2. Stop and wait for the next green even though the vehicle is in the junction
  3. Brake hard and stop in the middle of the intersection
  4. Proceed through the intersection with caution, clearing it promptly Correct answer.

Explanation

A steady amber warns that the signal is about to turn red, and drivers should stop unless they are so close that stopping cannot be done safely. In that case the driver should continue through and clear the intersection without delay. Sudden hard braking can cause a rear-end collision.

Question 50Road signs, signals and road markings

What does a rectangular blue sign showing a white symbol of a wheelchair indicate?

  1. A vehicle repair bay
  2. A pedestrian-only zone
  3. Parking or facilities reserved for persons with disabilities Correct answer.
  4. A hospital emergency entrance

Explanation

The wheelchair symbol on a blue rectangular sign marks parking bays or facilities reserved for people with disabilities. Unauthorised use of such a bay is an offence. The sign is informational and identifies a reserved facility.