NSSCO Woodwork 6190 study guide
NSSCO Woodwork 6190 · Work through your exam, one topic at a time.
NSSCO Woodwork 6190 is the Namibia Senior Secondary Certificate Ordinary Level subject in woodwork, taken by learners who want a formal school-leaving qualification that combines workshop craft with technical knowledge. It suits candidates who intend to go on to vocational training, join a joinery or furniture workshop, or simply want a practical subject alongside academic ones. The NSSCO Woodwork 6190 study guide has 9 sections and about 2,773 words.
01Materials: timber, manufactured boards, adhesives and finishes
This domain tests whether you can select and justify materials for a woodwork job: timber classification, conversion and seasoning, defects, manufactured boards, adhesives and finishes. Softwoods come from conifers; hardwoods from broad-leaved trees.
336 words, about 2 min02Hand tools and portable power tools: use, maintenance and safety
This domain examines safe selection, correct use, adjustment and routine maintenance of hand tools and portable power tools. Match the saw to the cut: rip saw for along the grain, crosscut saw for across, tenon saw for fine joinery, coping saw for curves.
335 words, about 2 min03Woodworking machines and machine operations
This domain tests machine setup, safe operation, and the relationship between cutter rotation, feed direction and finish. Guards, riving knives, anti-kickback devices and push sticks are mandatory on circular saws.
345 words, about 2 min04Jointing, carcass and frame construction
This domain tests joint selection and construction of boxes and frames that are strong, square and fit for purpose. Joint strength depends on glue area, fit and mechanical interlock.
293 words, about 1 min05Setting out, marking out, measuring and workshop calculations
This domain tests accurate transfer of dimensions from drawing to workpiece and the arithmetic used in cutting lists and costing. Establish a face side and face edge; all measurements refer to these datums.
295 words, about 1 min06Wood turning and shaping
This domain tests lathe setup, tool selection, cutting technique and safe shaping of cylindrical and faceplate work. Two main modes: spindle turning between centres and faceplate turning on a faceplate or chuck.
332 words, about 2 min07Project planning, costing, drawing and design
This domain tests the planning chain from brief to working drawing, cutting list and cost, including scale and design constraints. Start with a brief: purpose, user, size, material, finish, budget and deadline.
289 words, about 1 min08Health, safety and workshop organisation
This domain tests risk awareness, safe systems of work, PPE, dust and chemical control, and housekeeping. Risk assessment: identify hazard, decide who is at risk, rate likelihood and severity, set controls, record and review.
278 words, about 1 min09Practical project work and applied skills
This domain tests the integrated application of planning, marking, cutting, jointing, assembly and finishing to complete a project accurately and safely. Work from a drawing and cutting list.
270 words, about 1 min