NCCCO LBT study guide
NCCCO LBT · Work through your exam, one topic at a time.
The NCCCO Lift Director (LBT) certification is a credential offered within the CCO Certification family, which describes itself as "Committed to Quality, Integrity, and Fairness in Testing since 1995" and as a nonprofit founded in 1995. CCO states that its certifications are relied upon every day so employers can verify that personnel have demonstrated the knowledge, skills, and abilities needed to perform work safely, and it notes that certifications are used to monitor personnel, remain compliant, and confirm status. The Lift Director role centers on planning lifts, preparing and assessing the site, supervising execution, and controlling the regulations, standards, and documentation that govern a lift; this independent study page organizes preparation around those four areas. Candidates typically include experienced riggers, crane operators, supervisors, and lift planners moving into a lift-directing role, plus safety and training personnel who coordinate lifting operations. The NCCCO LBT study guide has 4 sections and about 1,355 words.
01Lift Planning
Lift Planning on the NCCCO Lattice Boom Truck (LBT) exam tests whether you can turn a load weight and a boom configuration into a defensible capacity check using the manufacturer's load chart, then document the plan. Lattice boom truck charts give gross capacity for a specific boom length, jib length and offset, counterweight, outrigger spread, quadrant, and radius.
346 words, about 2 min02Site Preparation and Hazard Assessment
Site Preparation and Hazard Assessment tests your ability to judge ground, setup, and surroundings before the boom goes up. OSHA 1926.1402 requires firm, level, drained ground, with blocking under outrigger floats sized to the actual bearing pressure.
356 words, about 2 min03Lift Execution and Supervision
Lift Execution and Supervision tests the sequence, communication, and stop-work judgment that turn a plan into a safe lift. Hold a pre-lift meeting with the operator, rigger, signal person, and supervisor.
341 words, about 2 min04Regulations, Standards, and Documentation
Regulations, Standards, and Documentation tests the paper trail and the legal framework behind the lift. For construction, OSHA 29 CFR 1926 Subpart CC (1926.1400–1442) applies.
312 words, about 2 min