NCCCO Lift Director study guide
NCCCO Lift Director · Work through your exam, one topic at a time.
The NCCCO Lift Director credential is a certification offered by CCO (the National Commission for the Certification of Crane Operators), an organization that has described itself as "Committed to Quality, Integrity, and Fairness in Testing since 1995." It is intended for the person on a lifting operation who is responsible for planning and directing the lift - coordinating the equipment, the rigging crew, the crane operator, and site conditions so that the lift is carried out safely. Candidates are typically experienced riggers, operators, supervisors, or site safety personnel moving into a planning and oversight role. Important note on this page: at the time this material was prepared (2026-11-06), the Lift Director certification page at the NCCCO address returned a 404 error. NCCCO's content has moved to CCOCert.org, and the redirected page displayed only a "page not found" message pointing visitors to the new site's Certifications, Handbooks & Forms, and Contact sections. Topics on this exam: Lift Director. The NCCCO Lift Director study guide has 1 section and about 446 words.
01Lift Director
The Lift Director domain tests whether you can run a lift end to end: matching the plan to field conditions, reading a load chart with every deduction applied, confirming ground and blocking, coordinating rigging and signals, and stopping work when conditions change. The lift director is the designated person who directs the lift. Before the lift they confirm the plan is site-specific, walk the setup, verify the crane's actual configuration matches the chart page in use, confirm the operator, riggers and signal person are qualified, and run a pre-lift meeting covering sequence, signals, tag lines, radio channel, and the stop command. During the lift they control sequence, watch radius and load, and stop work for wind, ground settling, two-blocking, or deviation from the plan.
446 words, about 2 min