Oklahoma Boiler Safety Rules and Regulations
This domain tests the Oklahoma framework for boiler safety: the Boiler and Pressure Vessel Safety Act, the Department of Labor rules in OAC 380:35, inspections, certificates, operator licensing, reporting, and code adoption. Expect questions on who may inspect, when a boiler may operate, and what must happen after a repair or accident.
Framework
Oklahoma adopts ASME construction codes and the National Board Inspection Code for repairs. The Commissioner of Labor administers the program through the Chief Boiler Inspector. Commissioned inspectors perform required inspections; repairs requiring a code stamp must be made by qualified holders.
Operating duties
- A boiler must be inspected and hold a valid certificate before operation, and the certificate must be available or posted as required.
- The owner must keep the boiler and its fittings in safe condition, correct unsafe conditions, and report accidents or failures as the rules require.
- Where an operator license is required, the operator must hold the proper license and be able to demonstrate safe operation.
- Repairs and alterations require inspection before the boiler returns to service.
Worked example: A new 200-hp steam boiler is installed and the owner wants to fire it for process steam. The owner must first arrange the required inspection and obtain the certificate; firing before approval violates the state program. If a tube is later replaced, the repair must be made under the code repair rules and inspected before the boiler is returned to service. The certificate is not a substitute for the repair inspection.
Traps: assuming OSHA or local fire rules replace the state boiler program; operating on an expired certificate; using an uncertified repair; failing to report an accident; confusing an operator license with the boiler certificate.