BPC/VBA Building Design (Draftsperson) Exam case studies
BPC/VBA Building Design (Draftsperson) Exam · Put your knowledge to work in context.
The BPC/VBA Building Design (Draftsperson) credential is a professional certification for draftspersons working in building design and documentation. It signals that a candidate can translate design intent into accurate, buildable drawings while working within the applicable building code and regulatory framework. It suits people preparing construction documentation under the supervision of a registered designer or architect, and those seeking formal recognition of drafting competence. The exam tests knowledge across the whole documentation cycle rather than one software package. The BPC/VBA Building Design (Draftsperson) Exam case studies are 5 cases and about 4,223 words.
1Fire-Rated Corridor Encroachment on a Class 2 Residential Refurbishment
You are documenting a refurbishment of an existing four-storey Class 2 residential building. The public corridor serving each level is 1.35 m clear between finished wall faces.
995 words, about 5 min2Dimensioning and Revision Control on a Multi-Discipline Drawing Set
You are the draftsperson on a three-storey commercial fit-out. The architectural drawing set has 42 sheets, including floor plans, reflected ceiling plans, elevations, sections and details.
864 words, about 4 min3Balcony Waterproofing and Fall Detail on a Coastal Apartment Project
You are detailing a new four-storey apartment building 400 m from the coast. Each apartment has a 2.4 m deep balcony with a concrete slab, a tiled finish and a proprietary membrane.
832 words, about 4 min4Coordinating a Structural Transfer Beam with Services in a Basement
You are documenting the basement of a five-storey building. The basement ceiling zone is 3.6 m floor-to-floor, with a 400 mm deep transfer beam spanning 9 m across the basement to carry columns from the floors above.
766 words, about 4 min5Site Access, Stormwater and Tree Protection on a Sloping Allotment
You are documenting a new two-storey dwelling on a 900 m² allotment that slopes about 3 m from the street to the rear. The design has a driveway at 1:6 down to a garage cut into the slope at the lower rear corner.
766 words, about 4 min