PEI IMA Grade 9 study materials
PEI IMA Grade 9 study resources

PEI IMA Grade 9: Codes, Standards and Regulatory Compliance

PEI IMA Grade 9 · Work through your exam, one topic at a time.

All guide sections

Codes, Standards and Regulatory Compliance

Codes, Standards and Regulatory Compliance (Domain 7) tests whether you can name the governing document for a situation and recognize where a voluntary standard becomes enforceable through adoption. Expect scenario questions: a task, a location, and four plausible documents.

The hierarchy

  • NFPA 30 (Flammable and Combustible Liquids Code) is the parent document; NFPA 30A (Motor Fuel Dispensing Facilities) is the application to retail and fleet fueling.
  • NFPA 70 (NEC), Article 514, governs electrical installations at motor fuel dispensing facilities.
  • PEI recommended practices supply the how: RP100 installation of USTs, RP200 repair, RP300 removal, RP500 inspection, RP800 AST installation, RP900 aviation, RP1200 testing of spill, overfill, leak detection and containment equipment.
  • EPA: 40 CFR 280 technical requirements and release detection, 281 financial responsibility, 112 SPCC. OSHA 1910.106 covers flammable liquid handling for workers.
  • State fire marshal rules and local amendments sit on top and often control the specific number; the approved plan and permit bind the site.

Operator training and records

  • Class A operator: overall compliance, resources and authority.
  • Class B operator: day-to-day implementation, release detection and reporting.
  • Class C operator: the person at the counter who responds to alarms and spills.
  • Records: test reports, walkthrough checklists, training certificates, financial responsibility and notification.

Worked example

A site replaces a submersible pump and its sump entry fitting. Which documents apply? NFPA 30A for the dispensing arrangement, NEC Article 514 for the seal-off and wiring, PEI RP200 for repair practice, RP1200 for the sump retest, and 40 CFR 280.36 for the 3-year containment sump test schedule. The local permit decides who may do the work and what inspection is required. Naming all five, plus which one drives the inspection, is the full-credit answer.

Traps

  • Citing NFPA 30 when the question is about a retail dispenser, where 30A governs.
  • Treating PEI RPs as mere guidance when a state has adopted them by reference.
  • Using the federal rule when the state has stricter requirements.
  • Assuming 40 CFR 280 covers aboveground tanks; it does not, so SPCC, NFPA 30 and state AST rules apply.