Red Seal Glazier case studies
Red Seal Glazier · Put your knowledge to work in context.
The Red Seal Glazier credential is a Canadian interprovincial trade certification for workers who measure, handle, cut, prepare, fit, install, replace and repair all types of glass and glass substitutes. The Red Seal program designated the Glazier trade in 1986, and it is designated Red Seal in every province and territory listed by the program. The trade is titled Glazier in most jurisdictions, while Ontario uses Architectural Glass and Metal Technician and Quebec uses Erector Mechanic (Glazier). The National Occupational Classification code is 73111. The Red Seal Glazier case studies are 5 cases and about 3,677 words.
1Structural Silicone Bite on a Four-Sided Curtain Wall Unit
A glazing crew is installing four-sided structural silicone glazed (SSG) curtain wall units on a 12-storey commercial building. Each vision unit is 1.5 m wide by 3.0 m high.
787 words, about 4 min2Condensation and Water Staining at a Low-Slope Atrium Skylight
A 6.0 m by 2.5 m aluminum-framed skylight sits over a three-storey atrium at a 15° slope, facing north. The glazing is double-glazed, low-e, argon-filled insulating glass units with warm-edge spacers.
743 words, about 4 min3Frameless Shower Door Sag and Mirror Edge Corrosion
A renovator is installing a frameless shower enclosure in a residential bathroom. The door is 760 mm wide by 2000 mm high, 10 mm tempered glass, hung on two wall-mount hinges.
754 words, about 4 min4Replacing Wired Glass in a 45-Minute Corridor
A hospital renovation includes a 45-minute fire-rated corridor. The existing corridor doors have 300 mm × 900 mm vision panels glazed with 6 mm wired glass in steel frames.
666 words, about 3 min5Cantilevered Glass Guard on a Residential Stair
A homeowner is finishing a basement stair in a single-family house. The stair opening is guarded by a glass guard 1100 mm high above the finished floor.
727 words, about 4 min