Red Seal Roofer case studies
Red Seal Roofer · Put your knowledge to work in context.
The Red Seal Roofer credential is an interprovincial trades qualification that certifies a roofer as competent across Canadian jurisdictions. It is intended for working roofers who have completed an apprenticeship or accumulated equivalent hours and want their skills recognized beyond their home province, and for employers and contractors who use the Red Seal stamp as a hiring benchmark. The Red Seal Roofer case studies are 5 cases and about 3,552 words.
1Recover Over Wet Lightweight Concrete on a Cold-Weather Deadline
A 1978 warehouse, 36 m × 24 m, has a roof assembly of two plies of SBS modified bitumen over 50 mm lightweight insulating concrete (LWIC) on corrugated steel deck. Slope is 1/8 in/ft to six interior drains.
731 words, about 4 min2Ice Dams and Frost in a Cathedral Ceiling After a Ventilation “Fix”
A cold-climate bungalow has a cathedral ceiling over a great room. The roof is framed with 2×10 rafters at 400 mm o.c., insulated with R-20 batts, covered on the interior with 6-mil polyethylene and painted gypsum.
748 words, about 4 min3Overflow Scupper Sealed During Parapet Repair
A 60 m × 40 m retail store has a mechanically attached TPO roof with a slope of 1/4 in/ft to four primary roof drains and four overflow scuppers. During a 100 mm rain, water ponded 75 mm deep at the northeast corner.
718 words, about 4 min4Standing-Seam Metal Over Historic Skip Sheathing
A 1920s church has a 12:12 roof with 600 mm cedar shakes over 25 mm skip sheathing spaced 200 mm o.c.; there is no underlayment. The congregation wants a new 24-gauge standing-seam metal roof to reduce maintenance.
706 words, about 4 min5Hail Claim Repair on Discontinued Laminated Shingles
A 2006 two-storey house has 220 m² of discontinued laminated asphalt shingles on a 6:12 roof. A 40 mm hail event bruised about 30 shingles on the south slope and filled gutters with granules.
649 words, about 3 min