Andalusia PAU Technology and Engineering II study guide
Andalusia PAU Technology and Engineering II · Work through your exam, one topic at a time.
The Andalusia PAU Technology and Engineering II examination is the university-access test taken by students in the Science and Technology track who want engineering, architecture or technical degrees to count fully in their admission score. It is also chosen by some candidates from other baccalaureate tracks who need a technical subject to raise their weighted grade. The Andalusia PAU Technology and Engineering II study guide has 8 sections and about 3,883 words.
01Materials Science and Engineering: Structure, Properties, Testing and Selection
In this domain the Andalusian PAU exam asks you to connect internal structure to measurable properties and then justify a selection with numbers. Questions typically give you a tensile or hardness result, a microstructure, or a component brief (low weight, corrosion resistance, electrical insulation) and expect a reasoned choice rather than a memorised name.
485 words, about 2 min02Mechanical Systems and Structural Design: Statics, Strength of Materials, Mechanisms and Machine Elements
This is the most heavily weighted calculation block of the PAU paper: free-body analysis of beams, stress checks on sections, and the kinematics of gears, belts and linkages. Marks are awarded for the diagram and the units as much as for the final number.
475 words, about 2 min03Electrical and Electronic Systems: Circuits, Components, Machines and Power
This domain moves from DC network analysis through single- and three-phase power to the electronics that drive machines. The PAU paper usually mixes a circuit calculation with a machine or power question, so you must be fluent in both DC and AC conventions.
455 words, about 2 min04Control Systems, Automation and Robotics: Sensors, Actuators, PLCs and Loop Behaviour
The control domain tests whether you can describe a system as blocks, predict its steady-state response, and specify the sensor, actuator and program that make it work. Numerical items usually involve a closed-loop gain or a PLC/sensor resolution calculation; descriptive items ask you to classify a loop or choose an industrial sensor.
497 words, about 2 min05Pneumatic and Hydraulic Systems: Components, Circuits and Applications
Fluid power questions in the PAU combine a force or speed calculation with the reading of an ISO 1219 circuit symbol. You must be able to convert bar to pascal instantly, apply F = p·A to both strokes of a cylinder, and follow the air or oil path through a valve.
477 words, about 2 min06Manufacturing and Production Systems: Machining, Forming, Joining and Metrology
This domain covers how a part is made and how it is verified. The PAU paper asks you to compute cutting parameters or machining time, to classify a process (conforming, forming, joining), and to interpret a measuring instrument's reading or a tolerance designation.
495 words, about 2 min07Energy, Sustainability and Technological Projects: Sources, Efficiency, Impact and Methodology
The energy and project block rewards clean unit handling and a structured answer. Expect a consumption, cost or CO₂ calculation, a comparison of energy sources, and questions on the phases, tools and documents of a technological project.
458 words, about 2 min08Technical Drawing and Graphical Expression: Standardisation, Views, Dimensioning and CAD
Drawing questions are quick marks if you know the conventions and expensive if you mix them up. The PAU paper shows a sketch or describes a part in words and asks for correct views, a section, a scale reading or a properly dimensioned drawing.
541 words, about 3 min