FGIA InstallationMasters case studies
FGIA InstallationMasters · Put your knowledge to work in context.
InstallationMasters® is a nationwide training and certification program administered by FGIA for installers of windows and exterior glass doors in residential and light commercial markets. It serves both new construction and replacement work, and it is built around industry-accepted installation practices rather than any single manufacturer's instructions - the source notes that manufacturer's instructions should always take precedence. Training spans the full job from initial site inspection through final cleaning and maintenance of installed product, so it covers substrate and opening preparation, flashing and integration detailing, product handling, shimming and anchoring, sealing, and post-installation care. The current curriculum, InstallationMasters 3.0, is a streamlined, highly visual revision with color-coded materials, modernized diagrams, integrated speaker notes, and a Spanish-language segment initially offered as self-study with three months of access and proctored exams completed in the FGIA Learning Management System. The FGIA InstallationMasters case studies are 5 cases and about 3,159 words.
1Pocket Replacement in Brick Veneer With Hidden Sill Rot
A 1968 single-story ranch has brick veneer over wood framing and original aluminum double-hung windows with integral storm panels. The homeowner wants pocket replacements because the interior plaster returns and oak trim are in good condition and the budget is tight.
652 words, about 3 min2Missing Head Flashings and Sill Pans on New Flanged Windows
On a new two-story house in a rainy climate, the crew has installed 12 flanged vinyl windows in 2x6 walls with 7/16 in. OSB sheathing, a spun-bonded housewrap lapped 6 in., and fiber-cement lap siding.
642 words, about 3 min3Stucco Slider Replacement With Out-of-Plumb Frame and Threshold Leak
A 1985 stucco-clad house has a 6 ft sliding glass door opening onto a patio. The rough opening is 72 in.
626 words, about 3 min4Large Fixed Window and Transom Over Exterior Foam
In Zone 6 new construction, the walls are 2x6 with 1 in. XPS rigid foam over OSB, a fluid-applied weather-resistive barrier over the foam, and cedar bevel siding.
604 words, about 3 min5Historic Double-Hung Insert Replacement With Egress and Lead Concerns
A 1925 Craftsman house has original 2-over-2 wood double-hung windows in wood siding. The owner wants vinyl insert replacements to keep the interior trim and reduce drafts.
635 words, about 3 min