ICC Reinforced Concrete SI study guide
ICC Reinforced Concrete SI · Work through your exam, one topic at a time.
The Reinforced Concrete Special Inspector credential is an ICC certification for professionals who inspect reinforced concrete construction for code compliance. It is aimed at building inspectors, special inspectors, testing technicians, and construction quality personnel who verify reinforcing steel placement, concrete materials and placement, and conformity with approved plans and code provisions. The exam is organized around four domains: Reinforced Concrete Inspection; Concrete Materials and Placement; Reinforcement and Prestressing; and Code Compliance and Plan Reading. Because these domains are weighted equally, a candidate should build balanced competence rather than over-studying one area. The ICC Reinforced Concrete SI study guide has 4 sections and about 1,657 words.
01Reinforced Concrete Inspection
This domain tests what a special inspector is expected to observe, verify, and record on a cast-in-place reinforced concrete project, and the limits of that role. Expect questions on pre-placement checklists, hold points, daily records, and how the inspector's authority flows from the building official through the statement of special inspections.
398 words, about 2 min02Concrete Materials and Placement
Questions in this domain cover sampling and testing, acceptance of strength results, environmental limits, and verification of placement and curing. This is the part of the job where numbers, not opinions, decide acceptance.
422 words, about 2 min03Reinforcement and Prestressing
This domain tests whether the reinforcement shown on the drawings is actually in place, correctly detailed and properly spliced, plus the special verification tasks on prestressed members. Soft-metric designations follow nominal diameter: No.
436 words, about 2 min04Code Compliance and Plan Reading
This domain tests whether you can locate the governing requirement and prove compliance with documents: reading placing drawings and schedules, checking submittals, and producing records a building official can rely on. Building code (IBC Chapter 17 for special inspections and the statement of special inspections) governs, then project specifications (often ACI 301), then approved drawings, then standard notes.
401 words, about 2 min