ICC E1 case studies
ICC E1 · Put your knowledge to work in context.
ICC E1 is one of the credentialing exams administered through the International Code Council's credentialing program, which the Council describes as providing "widely recognized credentials that demonstrate a confirmed commitment to protect public health, safety, and welfare." Candidates typically pursue an ICC credential to raise the professionalism of their department and to further their career in building safety, code enforcement, plan review, or inspection work. The credentialing program is organized into several categories - certifications, UST/AST examinations, and the Contractor/Trades examination program - and E1 falls within the certification family referenced on the credentialing homepage. The ICC E1 case studies are 5 cases and about 2,501 words.
1Taproom Conversion in a Former Mercantile Building
An applicant proposes converting a 4,800 sq ft single-story masonry building from mercantile to a craft brewery. The plan shows 2,200 sq ft of production area and a 2,600 sq ft taproom with tables and chairs, no fixed seating.
517 words, about 3 min2Unlisted Fire-Resistance Assembly for a Mid-Rise Apartment
A developer proposes a four-story, 48,000 sq ft wood-frame apartment building. The floor-ceiling assemblies are specified as a proprietary system using engineered wood joists at 24 inches on center, two layers of 5/8-inch gypsum board, and resilient channels.
504 words, about 3 min3Emergency Order After Fire Damage
After a two-alarm fire, a 1928 three-story brick bearing-wall commercial building has a second-floor framing system that is visibly sagging. The front parapet is 4 inches out of plumb over a 60-foot length and overhangs the public sidewalk.
488 words, about 2 min4Vested Rights and Code Edition at Permit Application
A local jurisdiction adopts the 2021 International Building Code effective July 1, with a 30-day grace period for complete applications filed before July 1. On June 28, an applicant submits plans for a 12-unit townhouse project.
496 words, about 2 min5Owner-Builder Affidavit and Unlicensed Contractor
A homeowner applies for a permit to build a 1,200 sq ft addition to a single-family residence. The homeowner signs an owner-builder affidavit stating that no licensed contractor will be used and that the homeowner will perform the work.
496 words, about 2 min