Haryana BSEH Secondary NSQF Automotive case studies
Haryana BSEH Secondary NSQF Automotive · Put your knowledge to work in context.
The Haryana Board of School Education (BSEH) offers NSQF-aligned vocational subjects at the Secondary level, and Automotive is one of the trade options students can take alongside their regular Class 10 subjects. The subject suits learners who want a recognised school qualification combined with hands-on garage skills - whether the next step is a polytechnic/ITI course, an apprenticeship, or work in a service workshop, dealership or spare-parts business. The Haryana BSEH Secondary NSQF Automotive case studies are 5 cases and about 3,221 words.
1Steering Wheel Shimmy After a Pad Replacement
A 2019 petrol hatchback with front disc and rear drum brakes, odometer 48,000 km, is brought to your workshop with steering wheel shimmy that appears only when braking from about 80 km/h. The owner says the front pads were replaced at another shop 1,500 km ago.
636 words, about 3 min2Three Flat Batteries and an Aftermarket Accessory
A 2020 petrol sedan (1.2 L, 45,000 km) has had three flat batteries in six weeks. The battery is a 45 Ah, 12 V unit, about 18 months old.
668 words, about 3 min3Highway Overheating With Two Conflicting Faults
A 2017 diesel hatchback, 92,000 km, is brought in because the temperature gauge climbs to the red zone after about 15 minutes at 90 km/h with the air-conditioning on, then returns to normal in slow city traffic. The coolant level drops roughly 200 mL every 500 km, but no external leak is visible.
675 words, about 3 min4Slipping Clutch on a Loaded Delivery Pickup
A 2018 light commercial pickup, 75,000 km, is used for market deliveries with frequent stop-start and loads near its 1.5-tonne payload limit. The driver reports that engine speed rises when climbing a flyover without matching road speed, and there is a burning smell after reversing up a loading ramp.
631 words, about 3 min5Deciding Between Honing and Reboring After Overheat
A four-cylinder petrol engine (bore 73.0 mm, stroke 82.0 mm, stated compression ratio 9.2:1) is stripped after overheating. The cylinder bores measure 73.12, 73.15, 73.14 and 73.13 mm.
611 words, about 3 min