Haryana BSEH Secondary NSQF Automotive exam-day guide
Haryana BSEH Secondary NSQF Automotive · Prepare for the day ahead.
Your checklist
Admit card and a photo ID (school ID or government-issued ID)
Carry the printed admit card issued for the NSQF Automotive practical examination and at least one original photo ID. Confirm with the provider which ID types are accepted and whether a photocopy is sufficient.
Exam centre and reporting time confirmed in writing
Re-check the exact centre address, gate, and reporting time on your admit card or official notice. If the practical is held at a different location from the theory exam, confirm the venue with your school coordinator.
School uniform or prescribed dress code
Wear the dress code specified for practical exams. For automotive work, closed-toe shoes are essential; confirm with the provider whether the school uniform is mandatory or whether workshop coveralls are required.
Basic stationery (blue/black pen, pencil, eraser, scale)
You may need to write observations, fill in a job card, or label a sketch. Carry only what the provider permits; confirm the stationery rules with the provider.
Safety gear if the provider requires it (safety shoes, goggles, gloves)
Automotive practicals may involve hand tools, lifting, or exposure to fluids. Confirm with the provider whether you must bring your own safety gear or whether it is supplied at the centre.
A simple calculator if permitted
Measurements and basic calculations (clearance, torque, fuel consumption) may appear. Confirm with the provider whether calculators are allowed; do not assume.
No prohibited items (mobile phone, smartwatch, notes, or printed material)
Leave study notes and electronic devices outside the exam hall or hand them over as instructed. Confirm the provider's rules on phones and bags.
Revise the practical syllabus and job sheet format
Go over the prescribed NSQF Automotive practical list and the format of the observation/job card you will fill in. Confirm the exact list with your instructor.
Practise the core workshop tasks hands-on
Be able to demonstrate safe use of spanners, screwdrivers, pliers, a tyre pressure gauge, a multimeter, and basic measuring tools. Ask your instructor to confirm which tasks are examinable.
Know the safety and first-aid basics
Revise workshop safety rules: fire extinguisher types, safe handling of fuel and battery acid, and basic first aid for cuts and burns. Confirm with the provider whether a viva on safety is part of the assessment.
Plan travel and reach the centre early
Allow extra time for traffic and for locating the workshop block. Confirm the reporting time and late-entry policy with the provider.
Read the instructions on the question paper or job card carefully
Before starting, read all instructions and check the marks allotted to each task. Ask the invigilator only for clarification of instructions, not for answers.
Plan the day
Make a one-page revision sheet of workshop safety rules, tool names and uses, and the sequence of common jobs (for example, wheel removal and refitting, battery checking, brake bleeding). Confirm the practical syllabus and assessment pattern with your instructor. Practise each core task at least once under time pressure, narrating the steps aloud as you would to an examiner. Check your admit card, ID, and travel plan. Confirm with the provider whether safety gear is supplied or must be brought.
Pack your admit card, photo ID, stationery, and any permitted safety gear in one bag. Re-read the safety rules and the job-card format. Do a light revision of tool identification and measuring-tool reading; avoid learning new topics. Sleep early and set two alarms. Confirm the reporting time and centre location once more with your school coordinator.
Eat a proper meal and reach the centre at least 30–45 minutes before the reporting time, unless the provider specifies otherwise. Carry only permitted items; leave your phone and notes behind or hand them in as instructed. Wear closed-toe shoes and the prescribed dress code. Listen carefully to the invigilator's briefing and read the job card or question paper fully before touching any tool.
Work safely: wear the required protective gear, keep the work area clear, and use the correct tool for each job. Read each task fully, note the marks, and allocate time accordingly. Record measurements and observations neatly on the job card. If you finish early, check your work, tighten and return tools, and clean your bay. Ask the invigilator only for clarification of instructions; do not discuss answers with other candidates.
Rules to check
Carry your admit card and an original photo ID at all times; candidates without valid documents may not be allowed to sit the practical. Confirm the accepted ID types with the provider.
Follow the centre's dress and safety rules, including closed-toe footwear and any protective gear. Do not operate any machine or tool without the invigilator's permission.
Mobile phones, smartwatches, and unauthorised notes are not permitted in the exam hall or workshop; hand them over as instructed. Confirm the provider's policy on electronic devices.
Do not communicate with other candidates during the test and do not share tools or answers. Raise your hand and wait for the invigilator if you need help.
Ask the invigilator only to clarify instructions; do not ask for the answer or for help with the task itself.
Breaks and movement are at the invigilator's discretion. Confirm the provider's rules on water, washroom breaks, and leaving the hall early.
Marks are awarded for correct procedure, safety, accuracy of measurements, and the completed job card or record, not only for the final result. Confirm the marking scheme with your instructor.
Any unfair means or unsafe behaviour can lead to disqualification. If you are unsure about a rule, ask the invigilator before acting.