Haryana BSEH Senior Secondary NSQF Construction study materials
Haryana BSEH Senior Secondary NSQF Construction study resources

Haryana BSEH Senior Secondary NSQF Construction study guide

Haryana BSEH Senior Secondary NSQF Construction · Work through your exam, one topic at a time.

BSEH's Senior Secondary NSQF Construction is a vocational subject offered in Classes XI and XII under the National Skills Qualifications Framework at Level 4. It suits students who want a recognised Class XII certificate that also carries a measurable trade skill in construction - a genuine entry point into site work, ITI trades, polytechnic diplomas or apprenticeships, though not a substitute for an engineering diploma. The Haryana BSEH Senior Secondary NSQF Construction study guide has 11 sections and about 3,420 words.

01

Introduction to the Construction Industry

This domain tests how the Indian construction industry is organised: who pays for work, who designs it, who builds it, and how a project travels from idea to handover. Expect questions on stakeholders, project stages, contract types and the industry's place in the economy.

316 words, about 2 min
02

Sectors and Career Pathways

This domain tests whether you can name the sectors of construction work and map a job role onto the national skill framework, showing where a worker can progress. Residential, commercial, institutional, industrial, transport infrastructure (roads, bridges, metro, railways), water and sanitation, power, and urban/smart-city works.

304 words, about 2 min
03

Occupational Safety, Health and Environment (OSHE) at Construction Sites

OSHE questions test whether you can spot a hazard, rank controls correctly, and name the legal duty owed by the employer. Falls from height are the leading cause of construction deaths; others are electrocution, being struck by plant or falling objects, trench collapse, silica dust from cutting, noise, manual handling, and cement burns.

343 words, about 2 min
04

Construction Materials: Properties, Testing and Storage

This domain tests cement types and tests, aggregate limits, concrete grades and testing, brick classes, steel grades, and correct storage practice. OPC 33/43/53 (IS 269, IS 8112, IS 12269); PPC (IS 1489).

334 words, about 2 min
05

Hand Tools, Power Tools, Equipment and Plant

This domain tests tool identification, correct use, care, and selection of plant for a given task. Masonry: trowel, hawk, spirit level, plumb bob, line and pins, bolster, club hammer, straight edge, corner trowel, wooden and steel floats, pointing tool.

295 words, about 1 min
06

Building Drawing

This domain tests drawing conventions - scales, line types, projection method, dimensioning, symbols and title block content - rather than site interpretation. Site or block plan 1:1000 or 1:500; floor plan 1:100; sections and elevations 1:50; details 1:20 or 1:10.

295 words, about 1 min
07

Reading of Drawings and Blueprint Interpretation

This domain tests whether you can take a drawing set and extract buildable information: levels, sizes, reinforcement, schedules and revisions. Read the title block, scale and revision first; identify grid lines and column centre-lines; read the setting-out and foundation layout; then follow each element from plan to section to detail; finally read schedules and notes and check cross-references.

312 words, about 2 min
08

Surveying, Setting Out and Levelling

This domain tests chain and compass basics, levelling bookkeeping with arithmetic checks, and setting out a building accurately. Base line, ranging rods, tape and offsets taken at right angles with a cross staff or optical square.

293 words, about 1 min
09

Building Construction Practices: Masonry, Concreting, Plastering and Finishing

This domain tests the correct sequence of operations and the workmanship limits for masonry, concrete, plaster and finishes. Excavation → levelling and anti-termite treatment → PCC → footing and column starter → plinth beam → backfill → masonry → lintel → slab → finishing.

347 words, about 2 min
10

Estimation, Costing and Quantity Take-off

This domain tests estimate types, measurement units, deduction rules and simple quantity calculations. Approximate (plinth area, cubical content, unit rate) for early budgets; detailed estimate from drawings measured to IS 1200; revised and supplementary estimates when scope or rates change.

291 words, about 1 min
11

Communication, Employability and Entrepreneurial Skills

This domain tests clear site communication, written records, job-readiness and the basics of running a small construction business. Give instructions that state task, location, standard, deadline and safety point.

290 words, about 1 min