Haryana BSEH Senior Secondary NSQF Power exam-day guide
Haryana BSEH Senior Secondary NSQF Power · Prepare for the day ahead.
Your checklist
Admit card and a photo ID
Carry the printed admit card issued for the practical examination along with a school-issued identity card or another photo ID accepted by your centre. The exact list of accepted IDs is set by the examination authority and the centre - confirm with the provider or your school coordinator which IDs are valid.
Practical answer booklet / stationery as instructed
Bring the writing materials your school has told you to bring (blue or black pen, pencil, eraser, sharpener, scale). Some centres supply answer sheets; do not assume - confirm with the provider whether you must bring your own.
Lab coat or apron and safety gear if your trade requires it
Power-sector trades typically involve electrical work, wiring, soldering, or machine handling. If your school has required an apron, closed shoes, or safety glasses for lab work, bring them. The exact dress-code requirement is centre-specific - confirm with the provider.
Prescribed record file / practical notebook / journal
Many NSQF vocational practicals require a completed practical file or journal that is checked and signed during the exam. Bring the file exactly in the format your instructor specified, with all required experiments or jobs written up and signed. Confirm the required contents and whether the file is graded separately.
Completed and signed project or job work, if assigned
If your trade assigned a project, model, or completed job (for example a wired board or assembled circuit), bring it in the condition and packaging your instructor specified, with your name and roll number labelled. Confirm with the provider whether project submission happens on the practical day or earlier.
Tools and measuring instruments listed for your trade
Bring only the tools your school has told you to bring (for example screwdriver set, pliers, multimeter, test lamp). Do not bring tools that are not permitted; if unsure whether an item is allowed, ask your instructor before the exam day.
Report at the centre well before the reporting time
Practical exams run in batches and slots. Reach the centre early enough to complete verification and seating. The exact reporting time is printed on your admit card or slot slip - confirm with the provider if it is not clearly stated.
Know your batch, slot, and lab/workshop room
Practical batches are often smaller than theory batches and may be split across rooms or time slots. Note your batch number and room from the admit card or school notice. If the slot is not shown, confirm with the provider before the exam day.
No prohibited items - phone, smartwatch, notes, or loose paper
Electronic devices and unauthorised written material are generally not allowed in the examination hall or workshop. Keep them outside or hand them over as the centre directs. The exact permitted-items list is centre-specific - confirm with the provider.
Transport, food, and hydration plan
Practical exams can run long and may involve waiting for your turn. Plan travel so you arrive calm, carry water, and eat before you report. Check whether the centre allows food or water inside the workshop - confirm with the provider.
A calm read-through of your trade's practical syllabus
Revise the job steps, safety precautions, and instrument-handling points for the practicals your school covered. Focus on procedures you will actually perform, not theory derivation. Confirm the practical syllabus and marking scheme with your instructor.
Emergency contact and school coordinator's number
Save your class teacher's or vocational instructor's phone number in case of a schedule change, missing document, or transport problem. Confirm with the provider how last-minute changes are communicated.
Plan the day
Confirm the exact date, reporting time, batch/slot, and venue with your school coordinator or the provider. Re-check your admit card details for spelling and roll number. Assemble your practical file, project, tools, and lab dress in one place. Rehearse the safety steps and job sequence for the practicals most likely to be assessed, and get any unsigned pages in your file signed by your instructor.
Pack your bag: admit card, photo ID, stationery, lab coat, file, and permitted tools. Do a final read of the safety precautions and instrument-use instructions for your trade. Confirm your travel route and departure time, set two alarms, and sleep on time. Avoid starting new topics the night before; consolidate what you already know.
Eat a proper meal, dress as required for lab work (closed shoes, apron if instructed), and leave with buffer time. Carry only permitted items; leave the phone and smartwatch at home or with a guardian. On arrival, complete verification, find your batch and room, and listen carefully to the invigilator's instructions before touching any equipment.
Read the question or job card fully before starting. Plan the sequence, check that your tools and instruments are in working order, and follow every safety step - especially isolation of supply, earthing, and use of test lamps before touching conductors. Write observations as you go rather than at the end. If a tool or component is faulty, raise your hand and inform the invigilator instead of improvising. Keep track of time and reserve the last minutes for checking connections, tidying the workplace, and completing your record.
Rules to check
Carry your admit card and the photo ID accepted by your centre at all times; you may be refused entry without them. If the accepted-ID list is not clearly stated on your documents, confirm with the provider before the exam day.
Electronic devices such as mobile phones and smartwatches, and any unauthorised notes or loose paper, are generally not permitted in the examination hall or workshop. Follow the centre's instructions for depositing them; confirm the exact permitted-items rule with the provider.
Follow all safety instructions given by the invigilator and instructor. Do not energise a circuit, operate a machine, or use a tool until you have been told to begin and have checked the setup. Report damaged equipment or unsafe conditions immediately.
Sit only in the seat or workstation allotted to you, and do not exchange tools, components, or written material with other candidates during the practical.
Breaks, water, and restroom permission are at the invigilator's discretion and are usually recorded. Ask the invigilator rather than leaving the workshop on your own; confirm the centre's break policy with the provider.
Marks for practical work typically include the job or experiment performed, the record or viva component, and adherence to safety and procedure. The exact weightage is set by the examining body - confirm the marking scheme with your instructor or the provider.
Maintain discipline and honesty: any unfair means, impersonation, or tampering with equipment or records can lead to cancellation of your practical as per the examining body's rules. The exact penalties are set by the authority - confirm with the provider.
Leave the workstation clean and return tools and instruments as directed before you leave. Do not remove any centre property, component, or record from the workshop.