ITI/NCVT Sheet Metal Worker (AITT Theory) exam-day guide
ITI/NCVT Sheet Metal Worker (AITT Theory) · Prepare for the day ahead.
Your checklist
Admit card / hall ticket
Print or download the AITT theory admit card issued through your NCVT/ITI portal. Check that your name, roll number, trade (Sheet Metal Worker) and exam centre match your ID. If any detail is wrong, contact your institute immediately; do not correct it by hand. Confirm the exact document format the centre accepts with the provider.
Original photo ID
Carry the original government photo ID in the same form used during registration (Aadhaar, PAN, passport, or similar). Photocopies and screenshots are usually not accepted. Confirm which IDs your centre accepts with the provider.
Two passport-size photographs
Carry recent photographs matching the one on your admit card, in case the centre needs them for verification or attendance records.
Institute ID card
Bring your ITI trainee identity card if one was issued; it helps staff verify you quickly at the gate.
Transparent pouch with stationery
Pack 2-3 blue or black ballpoint pens, a pencil, eraser and sharpener in a clear pouch. Do not carry loose paper, notes, or any printed material into the hall.
Simple analogue or basic digital watch
A plain watch helps you pace sections if the hall clock is not visible. Smartwatches and any device with communication or storage are normally banned; confirm the centre's device policy with the provider.
Water bottle and light snack
Carry a clear, label-free water bottle. Keep any snack outside the hall and eat it only during the permitted break, if one is allowed.
Know your centre route and reporting time
Do a dry run or check the route the day before. Note the reporting time on the admit card and plan to arrive well before it, since gates may close before the paper starts. Confirm the exact cut-off with the provider.
Revise core trade formulas and tables
Sheet Metal Worker theory rewards recall of development lengths, bend allowance, neutral axis, seam types, rivet sizes and standard wire gauge values. Write these on a single revision sheet you study before entering the hall, then leave it outside.
Read the instructions page carefully
Note the total marks, number of questions, negative-marking rule (if any), and whether multiple-choice or descriptive. Confirm the marking scheme with the provider rather than assuming.
Plan rough work
Rough work is normally allowed only on the sheet provided by the invigilator. Do not use the question paper margins unless told it is permitted.
Leave prohibited items at home
Mobile phones, smart devices, Bluetooth earbuds, books, and written notes should stay outside the hall. Many centres have no secure storage, so arrange to leave them with a companion.
Plan the day
Stop learning new topics. Re-read your own notes on development of surfaces, bend allowance and springback, edge preparation, soldering and brazing, riveted and threaded fasteners, and safety. Solve one full-length mock paper under timed conditions, then review every wrong answer against your textbook or ITI manual. Confirm your centre address, reporting time, and travel plan; print the admit card if you have not already.
Pack the checklist items in one bag: admit card, original ID, photographs, pens, pencil, eraser, watch, water bottle. Re-check the admit card details against your ID. Do a light revision of formulas and standard tables only; avoid cramming new material. Sleep at your normal time, set two alarms, and keep the bag by the door.
Eat a normal breakfast and avoid heavy or unfamiliar food. Leave early enough to absorb traffic or transport delays; aim to reach the centre before the reporting time on the admit card. Re-check the bag at the gate. Keep your phone switched off and hand it to your companion or leave it as the centre directs before entering the hall.
Sit at your allotted seat, place your admit card and ID where the invigilator can see them, and fill in the roll number and booklet details exactly as instructed. Read the full instructions page before turning to question one. Count the questions and note the marks so you can allocate time.
Do a first pass answering questions you know immediately. Mark difficult ones and return to them. For numerical items such as bend allowance or development length, write the formula, substitute values, and keep units consistent; show working if the paper awards step marks. For descriptive answers, use labelled points and simple sketches where permitted. Reserve the last 10-15 minutes to transfer or verify answers against the answer sheet and check that no question is left blank unintentionally.
Hand over the answer sheet and question paper as directed, and do not discuss or photograph the paper inside the centre premises. Note down anything you were unsure about and verify it later from your textbook.
Rules to check
Carry your original admit card and original photo ID at all times in the hall; keep them on the desk for verification. If you lose the admit card, contact your institute and the exam authority immediately; do not enter with a handwritten substitute.
Follow the invigilator's instructions on seating, filling the answer sheet, and timing. If you have a doubt about a question's wording, raise your hand and ask quietly; do not talk to other candidates.
Do not carry mobile phones, smartwatches, earbuds, books, or notes into the hall. If a prohibited item is found, it may lead to disqualification; confirm the centre's exact policy with the provider.
Breaks and washroom visits are typically allowed only with invigilator permission and may be escorted. Confirm the centre's break policy with the provider before the exam, and use the washroom before entering the hall.
Answer only in the language and format the paper specifies. If the paper is bilingual, you may read both versions, but write your answer in one language consistently.
Check the negative-marking rule before guessing on multiple-choice items; if negative marking applies, skip questions you cannot narrow down. Confirm this with the provider.
Maintain silence and do not look at or exchange material with other candidates. Any malpractice can lead to cancellation of your paper and further action by the examining body.
Leave the hall only after the invigilator collects your answer sheet and permits you to go. Do not tear pages from the booklet or take the question paper out unless you are explicitly allowed to.