UPMSP Intermediate Technical Drawing case studies
UPMSP Intermediate Technical Drawing · Put your knowledge to work in context.
UPMSP Intermediate Technical Drawing is the Class 12 elective drawing paper offered under the Uttar Pradesh Madhyamik Shiksha Parishad (UP Board) intermediate curriculum. It suits students who intend to move into polytechnic diplomas, engineering entrance routes, draughtsmanship jobs, or workshop and construction trades, and who are willing to spend long hours at a drawing board rather than memorising text. The UPMSP Intermediate Technical Drawing case studies are 5 cases and about 3,295 words.
1Dimensioning a Stepped Shaft for the Workshop
In a school workshop drawing exercise, a student prepares an A3 front view of a stepped shaft whose overall length is 180 mm. The shaft has diameters 40 mm, 30 mm and 20 mm and a 10 mm wide keyway.
650 words, about 3 min2Selecting and Constructing a Site Plan Scale
A survey group must plot a rectangular campus 360 m by 240 m on an A3 sheet measuring 420 mm by 297 mm. A 15 mm margin is required on all sides, and a 60 mm by 40 mm title block sits in the bottom-right corner.
642 words, about 3 min3A Line Inclined to Both Reference Planes
A line AB is 70 mm long. End A is 15 mm above HP and 20 mm in front of VP; end B is 55 mm above HP and 60 mm in front of VP.
671 words, about 3 min4Sectioning a Hexagonal Pyramid for a Template
A hexagonal pyramid with base side 30 mm and axis 70 mm stands on its base on HP. A cutting plane is inclined at 30° to HP and passes through a point on the axis 40 mm above the base.
674 words, about 3 min5Isometric Drawing of a Bearing Bracket
A candidate must draw an isometric view of a cast-iron bearing bracket. The base is 100 mm × 60 mm × 12 mm, the vertical web is 60 mm × 12 mm × 50 mm, and a boss of outside diameter 40 mm with a 20 mm bore projects from the web.
658 words, about 3 min