UPMSP Intermediate Technical Drawing study guide
UPMSP Intermediate Technical Drawing · Work through your exam, one topic at a time.
UPMSP Intermediate Technical Drawing is the Class 12 elective drawing paper offered under the Uttar Pradesh Madhyamik Shiksha Parishad (UP Board) intermediate curriculum. It suits students who intend to move into polytechnic diplomas, engineering entrance routes, draughtsmanship jobs, or workshop and construction trades, and who are willing to spend long hours at a drawing board rather than memorising text. The UPMSP Intermediate Technical Drawing study guide has 10 sections and about 3,264 words.
01Drawing Instruments, Materials and Basic Conventions
The Drawing Instruments, Materials and Basic Conventions domain checks whether you can set up a sheet, use instruments correctly, and apply BIS line conventions without being told. Expect questions on T-squares, set squares, compass, divider, French curve, protractor, pencil grades, sheet sizes, title block, and the meaning of continuous, dashed, chain and cutting-plane lines.
325 words, about 2 min02Lettering
Lettering tests legible single-stroke capital lettering and numerals, guide-line use, uniformity, and correct height and spacing. Questions may ask for standard heights, stroke order, vertical or inclined capitals, and the difference between lettering for titles and dimensions.
296 words, about 1 min03Dimensioning and Line Work
Dimensioning and line work tests whether a drawing can be manufactured without scaling. You must know dimension lines, extension lines, arrowheads, leaders, aligned dimensioning, symbols, and the BIS rule that all dimensions are in millimetres unless stated otherwise.
319 words, about 2 min04Geometrical Construction and Scales
This domain tests accurate construction of perpendiculars, angle bisectors, parallels, regular polygons, tangents, conic curves and engineering scales. Scale questions usually ask for a plain or diagonal scale from a representative fraction (RF), with correct subdivision and labelling.
326 words, about 2 min05Orthographic Projection of Points, Lines and Planes
This domain tests first-angle projection on HP and VP, quadrant positions, projections of points, true lengths and inclinations of lines, traces, and the traces of planes. You must be able to place front and top views correctly relative to XY.
343 words, about 2 min06Projection of Solids and Sections of Solids
Projection of solids and sections tests prisms, pyramids, cylinders and cones in simple and inclined positions, and the effect of section planes. You must draw the sectional view, true shape of section, and hatching correctly.
337 words, about 2 min07Development of Surfaces and Intersection of Solids
Development of surfaces and intersection of solids tests unfolding prisms, cylinders, pyramids and cones, and locating the line where two solids meet. Expect parallel-line development, radial-line development, triangulation, and intersection curves.
331 words, about 2 min08Isometric and Oblique Projections
Isometric and oblique projections test pictorial drawing from orthographic views, correct axes and scales, and the difference between isometric drawing and isometric projection. Oblique cavalier and cabinet projections are also examinable.
316 words, about 2 min09Machine Drawing: Fasteners, Joints and Bearings
Machine drawing tests conventional representation of threads, bolts, nuts, rivets, keys, cotter joints, welded joints and bearings. The exam expects BIS conventions, empirical proportions and correct sectional treatment of standard parts.
341 words, about 2 min10Building Drawing and Civil Engineering Graphics
Building drawing and civil engineering graphics tests plan, elevation and section of simple buildings, wall thickness, openings, stairs, foundations, symbols and site conventions. You must relate plan dimensions to actual construction.
330 words, about 2 min