GER Licensed Electrical Inspector
More study resources
Cheat sheet
Keep the key ideas within reach.
ExploreKey terms
Get comfortable with the vocabulary.
ExploreStudy plan
Give each week a clear focus.
ExploreCommon mistakes
Understand the traps and how to avoid them.
ExploreCase studies
Put your knowledge to work in context.
ExploreExam-day guide
Prepare for the day ahead.
ExploreAbout this exam
The GER Licensed Electrical Inspector credential is a professional licensing designation for electricians and inspectors who verify that electrical installations comply with applicable codes and standards in the German market. It is aimed at experienced electrical practitioners moving into plan review, site inspection, and code enforcement roles, as well as working inspectors seeking formal recognition of their competence. Candidates are typically expected to combine hands-on installation knowledge with the ability to read drawings, apply code requirements consistently, and document findings that withstand challenge. The exam is delivered in multiple-choice format and spans eight content domains: electrical theory and fundamentals; wiring methods and materials; branch circuits, feeders, and service calculations; grounding, bonding, and overcurrent protection; inspection procedures and documentation; code enforcement and plan review; special occupancies, equipment, and hazardous locations; and safety, liability, and professional ethics. Preparation should be active rather than passive. Work through the code systematically with the actual text open beside you, practise load and conductor sizing calculations until they are automatic, and rehearse inspection scenarios where you must decide what to cite and how to write it up. Because this is an independent study resource, we do not claim affiliation with any licensing body; always confirm current administrative details with the issuing authority before you register.
What you'll study
About GER Licensed Electrical Inspector preparation
What is the exam format?
It is a multiple-choice examination covering the eight published content domains, with the largest shares given to wiring methods, branch circuit and service calculations, and inspection procedures and documentation. Expect scenario-style items that ask you to apply a requirement rather than simply recall a definition. Confirm the current delivery method and item count with the issuing authority.
How long is the exam, and how many questions does it contain?
The official body publishes the current question count and time limit, and those figures change from time to time, so check its website for the version in force on your test date. Do not rely on numbers quoted in forums or older study material.
How hard is it in practice?
Most candidates find the theory items manageable and the calculation and code-application items demanding. Difficulty comes from time pressure and from questions that combine several rules at once, such as sizing a feeder while also selecting overcurrent protection and grounding. Strong code navigation skills matter as much as memorisation.
Can I retake the exam if I fail?
Retake rules, waiting periods, and any limits on attempts are set by the issuing authority and are not fixed across jurisdictions or over time. Check the official site for the current policy before you book, and build a study plan that assumes one serious attempt rather than several.
What should I study first?
Start with electrical theory and fundamentals, because conductor sizing, voltage drop, and overcurrent selection all rest on it. Then move to wiring methods and calculations, followed by grounding and bonding. Leave inspection procedures, plan review, and ethics until last, since those domains reward the technical base you have built.
Where do candidates most often lose marks?
Common failure modes are misapplying derating factors, confusing grounding with bonding, forgetting that special occupancies impose stricter rules than general locations, and writing inspection findings that are vague or cite no requirement. Calculation slips under time pressure and skipped exceptions in the code are also frequent.
How should I prepare for the inspection and documentation domain?
Practise writing short, defensible findings: what you observed, which requirement applies, and what correction is needed. Review sample plan sets and mark what you would check on site. This domain rewards clear structure more than memorisation, and it is easy to underestimate.
Is there a fee, and how long is the licence valid?
Fees, licence validity periods, and renewal requirements are published by the issuing authority and are subject to change. Consult its official website for the figures that apply to you rather than relying on third-party summaries.
Does this page make me eligible or register me for the exam?
No. This is independent study material and is not affiliated with or endorsed by the licensing body. Eligibility, application, and scheduling are handled entirely by the issuing authority; use this page only to structure your preparation.