SLNC Registration study guide
SLNC Registration · Work through your exam, one topic at a time.
SLNC Registration is a professional credential for practitioners working in land, site, and natural-resource compliance - people who assess sites, apply standards and codes, produce designs and specifications, oversee installation and construction, verify work through inspection and testing, and document decisions ethically. The exam is delivered as multiple choice and is organized around six domains: Standards, Codes, and Regulations (20%); Site Assessment and Planning (15%); Design and Specification (20%); Installation and Construction Practices (20%); Inspection, Testing, and Verification (15%); and Documentation, Reporting, and Ethics (10%). The SLNC Registration study guide has 6 sections and about 1,622 words.
01Standards, Codes, and Regulations
SLNC Registration Domain 1 examines the legal chain that makes a requirement enforceable on a project: statute or ordinance, adopted model code, referenced standards, permit conditions, and contract documents. You must identify the governing edition and explain why a familiar national standard may not be the controlling text.
358 words, about 2 min02Site Assessment and Planning
Domain 2 tests whether you can establish verified site facts before design: legal boundaries, easements, utilities, topography, drainage, geotechnical conditions, access, and environmental constraints. The exam favors measured and documented data over assumptions from drawings.
261 words, about 1 min03Design and Specification
Domain 3 tests translating site facts and code requirements into coordinated drawings and specifications that can be bid, permitted, and built. Questions focus on basis of design, document hierarchy, substitutions, and constructability.
271 words, about 1 min04Installation and Construction Practices
Domain 4 tests field control: whether installation follows approved documents, manufacturer instructions, and accepted workmanship standards, with records kept at hold points. Verify approved submittals, material conformance, storage conditions, and mock-up acceptance.
233 words, about 1 min05Inspection, Testing, and Verification
Domain 5 tests verification: planning inspections and tests, using valid instruments, applying acceptance criteria, and handling nonconformance. The exam distinguishes contractor quality control from AHJ and third-party inspection roles.
248 words, about 1 min06Documentation, Reporting, and Ethics
Domain 6 tests record integrity and professional conduct: whether reports are accurate, traceable, timely, and signed only by someone with competence and authority. Maintain daily logs, dated and located photos, test reports, calibration records, as-builts, RFIs, change orders, O&M manuals, and warranties.
251 words, about 1 min