Luxembourg Brevet de Maîtrise exam-day guide
Luxembourg Brevet de Maîtrise · Prepare for the day ahead.
Your checklist
Convocation and exam schedule
Bring the convocation or registration confirmation issued by your examining body (for the Brevet de Maîtrise this is typically organised through the Chamber of Trades / Chambre des Métiers or your training provider). It states the date, time, room and which modules or practical stations you sit. Re-read it the week before: confirm with the provider if any detail is unclear.
Valid photo ID
Bring an official photo identity document (national ID card or passport). Name must match your registration. If you have changed your name or your ID is expired, confirm with the provider in advance what alternative proof is accepted.
Tools and equipment required for your trade
The practical part of the Brevet de Maîtrise is trade-specific. Bring the tool list your training centre or examining commission has communicated (hand tools, measuring instruments, PPE, calculator if permitted). Confirm with the provider which tools are supplied on site and which you must bring yourself - do not assume.
Work clothing and personal protective equipment
Safety shoes, work clothes, gloves, safety glasses, hearing protection or other PPE appropriate to your trade. Confirm with the provider whether PPE is mandatory for entry to the workshop and whether it is provided.
Written materials allowed by the rules
Bring pens, pencil, eraser, ruler and any approved reference documents (e.g. standards extracts, formula sheets) only if the instructions explicitly allow them. Confirm with the provider which documents are authorised; unauthorised material can lead to exclusion.
Calculator and watch
A silent, non-programmable calculator if calculations are part of your practical work, and a simple watch to manage time. Confirm with the provider whether programmable or graphing calculators are permitted.
Food, water and medication
Practical exams can run several hours. Bring water and a snack if the schedule allows, and any personal medication you need. Confirm with the provider whether food and drink are allowed at the workstation and what break arrangements exist.
Transport and arrival plan
Check the route, parking and public transport for the exam site, and aim to arrive well before the stated reporting time. If you are late, entry is not guaranteed - confirm with the provider what the late-arrival rule is.
Know your candidate number and procedure
Note your candidate number and the reporting desk procedure. Confirm with the provider how candidates are identified and called to their station.
Emergency contact and provider phone number
Save the examining body's contact number in your phone in case of transport problems or illness on the day. Confirm with the provider whom to call and how to report inability to attend.
Plan the day
Re-read the convocation and the trade-specific instructions: station list, time allowed per task, tool list, PPE and permitted documents. Assemble your tool kit and check every item works (measuring instruments, batteries, blades, cables). Wash and pack work clothes. Confirm travel arrangements and, if anything in the instructions is ambiguous, contact the provider now rather than on the day.
Do a timed dry run of the most representative practical task under realistic conditions, using only the tools and documents you are allowed to bring. Note where you lose time - setup, measuring, finishing, cleaning - and decide a working order for the day. Review the safety rules of your trade, since safety compliance is commonly assessed in practical tests.
Pack your bag completely: ID, convocation, tools, PPE, pen and paper, calculator, water. Lay out work clothes. Check the weather and transport timetable. Eat normally, avoid heavy study late in the evening and get a full night's sleep. Do not start learning new techniques the night before.
Eat a proper breakfast, arrive at the site with margin, and go through the reporting procedure with your ID and convocation. Listen carefully to the invigilator's briefing: it sets out time limits, permitted materials, break rules and what to do if equipment fails. Set out your tools in a logical order before the start signal.
Read the whole task sheet before touching tools, then allocate time per task and keep a reserve for finishing and cleaning up. Work to the stated tolerances and specifications rather than to what 'looks right'. Respect safety rules at all times. If a machine breaks, a material is missing or a task is impossible as written, raise your hand and ask the invigilator immediately - do not improvise silently. Label your work with your candidate number as instructed, and leave the workstation clean and tools accounted for at the end.
Hand in your work and any answer sheets exactly as instructed, check that your candidate number is on everything required, and take your personal tools and belongings. Do not discuss task content with candidates who have not yet sat the exam.
Rules to check
Bring valid photo ID and your convocation; candidates who cannot be identified may not be admitted. Confirm with the provider what alternative identification is accepted.
Only bring tools, documents and equipment that the instructions authorise. Unauthorised reference material, notes or communication devices at the workstation can lead to exclusion - confirm with the provider where phones must be stored.
Follow all safety instructions and wear the required PPE. Unsafe behaviour in a workshop can lead to the task being stopped and can affect the assessment.
Breaks and leaving the room are governed by the invigilator's briefing. Ask before leaving the workstation, and expect that you will not get extra time for breaks unless the rules say so.
Raise your hand for any problem: equipment failure, missing material, ambiguity in the task sheet or illness. Decisions taken by the invigilator on the day are recorded; do not resolve problems by borrowing from another candidate without permission.
Work must be your own. Communication with other candidates during the test, or copying their work, is treated as cheating. Confirm with the provider how collaboration rules apply to shared workshop equipment.
Scoring and pass criteria are set by the examining body and may combine practical, written and oral components with minimum marks per part. Confirm with the provider the weighting, the pass mark and the resit rules rather than relying on hearsay.
If you are ill or cannot attend, contact the provider as early as possible and ask about the procedure for justified absence and rescheduling; do not simply fail to appear.